Husky PRONTO-FUTABA-060717 User Manual

Hot Runner Systems

FP-Series

For use with Futaba standard mold bases

2006.07 Information and specifications subject to change without notice. For latest product information please refer to www.hotrunners.com

English Metric 2006.07

PRONTO

PRONTO FP-Series Hot Runner Systems

HUSKY offers a full line of standard plate size hot runners which have all the fe atures of our custom systems but are offered at lower cost and faster deliveries. FP-series plates have been designed to mate with Futaba industry-standard mold sets and the manifolds have been designed to provide a large degree of flexibility when laying out cavities. Other series are also available for Hasco mold bases, D-M-E and National mold bases (SP-series) and OMNI Mold Systems mold bases (MP-series).

Pronto hot runners are available in 2, 4 and 8 drop configurations with VG, VX, HT-D, HT-T, HT-DX, HT-DC & TS nozzles. The plastic material to be processed should be reviewed with the material compatibility chart available on

www.hotrunners.com. This will determine if the application being considered is suitable for the Pronto manifold, Ultra 500, and Ultra 750 nozzle. The appropriate melt channel sizes will be selected by Husky based on the resin and part information provided.

Pronto Hot Runner System

Industry standard mold base

Please confirm all dimensions and nozzle suitability by referring to www.hotrunners.com or by calling Husky.

FP-series 2006.07

PRONTO

PRONTO Hot Runner System Design Guidelines

Electrical Connectors

Manifold Thermocouple

Ultra 750 Nozzle

VG Available With

1.0mm (0.039"), 1.8mm

(0.071"), or 2.5mm (0.098")

Gate Diameter

Ultra 500 VG/VX available with

1.0mm (0.039"), 1.2mm

(0.047"), 1.5mm (0.059") or

1.8mm (0.071") Gate Diameter

Valve Stem

Optional 6.35mm (1/4") platen insulator board available (not shown)

Back-Up Pad

Piston

Piston Cylinder

Manifold

Center Insulator

Flexible Pitch

Nozzle Ti p Insert

Tip Retainer

UltraSeal

1/2" - 13 UNC or M12

Cavity Plate Interface Taps

3/4" and 1" or

16mm and 20mm

Diameter Guide Pin

Sprue Bushing

Five Choices of Sprue Bushing Interface (Flat, 1/2", 3/4",

10.0mm, 15.5mm,

20.0mm & 40.0mm Spherical Rad)

Six Choices of Locating Ring Dia. (3.99", 4.00"

100.0mm, 120.0mm,

125.0mm and

160.0mm)

Back-Up Insulator Pad

Industry Standard Mold Base Sizes

The top nozzle displays a valve gate (VG) system and the bottom nozzle displays a thermal gate (HT) system..

Please confirm all dimensions and nozzle suitability by referring to www.hotrunners.com or by calling Husky.

FP-series 2006.07

PRONTO

PRONTO Hot Runner System Selection

Pronto Hot Runners are designed to mate directly with the most popular industry standard mold bases. Replacing the top clamp plate of a standard mold set with a Husky hot runner will give you a complete runnerless mold solution. Pronto FPseries systems are available with 40 different sizes of plates which can be order ed with three styl es of 2 dr op, two styles of 4 drop, and one style of 8 drop manifolds. Flexible nozzle spacing and L-dimensions and 4 gating styles result in outstanding flexibility.

Standard features and options of Pronto Hot Runner Systems include:

• Flexible nozzle spacing within allowable range for given plate size

• Guide pins located such that they will not interfere with mold leader pins or return pins. 16.0 mm diameter on 400 x 700 and smaller plates, 20.0 mm diameter on larger plates

• A large number of M12 cavity plate interface taps of which a Min number must be incorporated into the mold design

• ISO 7/1-Rc 1/4 (also referred to as BSPT, PT, BSPTr and KR) threads for air fittings on the non-operator side of the mold and water fittings on the bottom of the mold

• For 2 and 4 drop systems a choice of: two 24-pin connectors, one 24-pin and on e 25-pin, on e 16-pin and one 25-pin or two 16-pin electrical connectors located on top of the hot runner with a flexible wiring sequence

• For 8 drop systems a choice of: four 24-pin connectors, two 24-pin and two 25-pin, two 16-pin and two 25-pin or four 16-pin electrical connectors located on top of the ho t ru nn er w ith a flexib le wirin g se qu en ce

• Optional 6.35mm (

• Choice of 3.99", 4.00", 100mm, 120mm , 12 5m m or 16 0 mm loca tin g rin g dia m et er

• Choice of flat, ½", ¾", 10.0mm, 15.5mm, 20.0mm or 40.0mm spherical radius sprue bushing interface

• Clamp slots (always on operator and non-operato r plate sides)

• Plunger shut-off standard (Ultra 500 & Ultra 750 VG / VX). Taper shutoff available( Ultra 750 VG/VX and Ultra 500 VG)

HUSKY recommends the use of a 25mm (1") spacer plate between the cavity plate and the hot runner plates if any mold components require steel back-up. The orientation of the manifolds within the hot runner plates and the thickness of the plates is pre-determined by Husky

¼"’) platen insulator board

Please confirm all dimensions and nozzle suitability by referring to www.hotrunners.com or by calling Husky.

FP-series 2006.07

PRONTO

2 Drop A-Type

Orientation

Electrical Air (Valve Gate)

Cooling water

TOP

OPERATOR

DROPS ALIGNED WITH LONG SIDE OF PLATES

2 Drop B-Type

Orientation

Electrical Air (Valve Gate)

Cooling water

TOP

OPERATOR

DROPS ALIGNED WITH LONG SIDE OF PLATES

Please confirm all dimensions and nozzle suitability by referring to www.hotrunners.com or by calling Husky.

FP-series 2006.07

2 Drop C-Type

Orientation

Electrical Air (Valve Gate)

PRONTO

TOP

Cooling water

OPERATOR

DROPS ALIGNED WITH SHORT SIDE OF PLATES

Please confirm all dimensions and nozzle suitability by referring to www.hotrunners.com or by calling Husky.

FP-series 2006.07

PRONTO

4 Drop L-Type

Orientation

Electrical Air (Valve Gate)

Cooling water

TOP

OPERATOR

DROPS ALIGNED WITH LONG SIDE OF PLATES

4 Drop H-Type

Orientation

TOP

OPERATOR

Drop H-Type Advantage

he 4 drop H-Type provides increased flexibility concerning drop positioning (note- all drops are symmetrical to ne another), X and Y are independent of each other.

Please confirm all dimensions and nozzle suitability by referring to www.hotrunners.com or by calling Husky.

FP-series 2006.07

PRONTO

8 Drop H-Type

Orientation

Electrical Air (Valve Gate)

Cooling water

TOP

OPERATOR

Please confirm all dimensions and nozzle suitability by referring to www.hotrunners.com or by calling Husky.

FP-series 2006.07

PRONTO

Platen mounting - Two choices of platen mounting are available:

• The backing plate width, W, can be larger than the manifold plate for direct platen bolting. Husky will not install any clamp slots or holes for platen mounting screws.

• The backing plate width, W , can be the same as the manifold plate and Husky will install clamp slots on the long sides of the plates.

Manifold plate width

25 mm clam thickness

Husky will not install platen mounting features

55 mm region where platen bolting can not be added

60 mm for valve gate 32 mm for thermal gate

Please confirm all dimensions and nozzle suitability by referring to www.hotrunners.com or by calling Husky.

FP-series 2006.07

PRONTO

PRONTO clamp slot configurations

Clamp slot configuration for 2A, 4H, 4L, 8H(HT/ TS) and 8B(HT/TS)-Type orientations.

Clamp slot configuration for 2B Type orientations.

Clamp slot configuration for 2C Type orientations.

TOP OF MOLD16 mm

28mm

35 mm

OPERATOR SIDE OF MOLD

16 mm

28mm

102mm

72mm

OPERATOR SIDE OF MOLD

16 mm

TOP OF MOLD

Clamp slot configuration for 8H (VG/VX)-Type orientations.

28mm

100mm

65mm

OPERATOR SIDE OF MOLD

TOP OF MOLD16 mm

28mm

35 mm

OPERATOR SIDE OF MOLD

80 mm

Please confirm all dimensions and nozzle suitability by referring to www.hotrunners.com or by calling Husky.

FP-series 2006.07

PRONTO

To configure Pronto hot runners follow the three simple steps below.

1 Determine the nozzle pitch required for the mold design and ensure that it is within the allowable range for the desired

size of plates. 2 Select the gating method suitable to your application 3 Select the desired nozzle length based on L-dimension range availab le for the selected gating style

For example for a 400 x 700 hot runner with a 2 drop, 750 nozzle size, 58.70 mm manifold X-dimension using valve gated VG tips and 44,45 mm L-dimension order:

F4070-7502A058,70M-VG044,45

P4070 7502A058,70/xxx,xxM VG 044,4

"M" for metric

Manifold plate length to nearest cm

Manifold plate width to nearest cm

(Always M for FP Pront)

Y-dimension (for 4H/4L-Types only,

center of manifold to outer drop in mm, two decimals)

Gate style

L- dimension (in mm, two decimals)

"FP" for FP-series

X-dimension (center of manifold to outer drop in mm, two decimals)

A, B, H or L Type manifold

Number of drops

Nozzle size

STEP 1 - Ensure that the selected nozzle pitch is within the allowable guidelines of the plate model as shown in the charts on the following pages.

• 2A, 2B and 2C manifolds have a Min X-dimensio n o f 60.0m m (2 .362 ") for Ultra 500 & Ultra 750 the rma l gate s (HT a nd

TS) and 70.0mm (2.756") for Ultra 500 & Ultra 750 valve gates (VG and VX).

• 4L manifolds have a Min X-dimension of 60.0mm (2.362") and a Min Y-dimension of X + 45mm (1.772") for Ultra 500 &

Ultra 750 thermal gates (HT and TS). 4L manifolds have a Min X-dimension of 70.0mm (2.756") and a Min Y-

dimension of X + 57mm (2.244") for Ultra 500 & Ultra 750 valve gates (VG and VX).

• 4H manifolds have a Min X-dimension of 50mm (1.969") and a Min Y-dimension of 50mm (1.969") for all nozzle series

and gating options.

• 8H manifold minimum X & Y dimensions: Min ’X’ > 73mm (2.87") / Min ’Y1’ > 61.3mm (2.41") / Min ’Y2’>Y1+62mm

(2.44")

Please confirm all dimensions and nozzle suitability by referring to www.hotrunners.com or by calling Husky.

FP-series 2006.07

PRONTO

Part #

Width x

Length

2A-Type Max. "X" 2B-Type Max. "X" 2C-Type Max. "X"

FP2540 250.0 X 400.0 115mm (4.527") 95mm (3.740") FP2545 250.0 X 450.0 140mm (5.511") 136mm (5.354") FP2550 250.0 X 500.0 165mm (6.496") 161mm (6.338") FP2730 270.0 X 300.0 65mm (2.559") N/A FP2735 270.0 X 350.0 90mm (3.543") 70mm (2.755") FP2740 270.0 X 400.0 115mm (4.527") 95mm (3.74") FP2750 270.0 X 500.0 165mm (6.496") 161mm (6.338") FP2930 290.0 X 300.0 65mm (2.559") N/A FP2935 290.0 X 350.0 90mm (3.543") 70mm (2.755") FP2940 290.0 X 400.0 115mm (4.527") 95mm (3.74") FP3030 300.0 X 300.0 65mm (2.559") N/A FP3035 300.0 X 350.0 90mm (3.543") 70mm (2.755") FP3045 300.0 X 450.0 140mm (5.511") 136mm (5.354") FP3055 300.0 X 550.0 190mm (7.48") 186mm (7.322") FP3060 300.0 X 600.0 215mm (8.464") 211mm (8.307") FP3335 330.0 X 350.0 90mm (3.543") 70mm (2.755") FP3345 330.0 X 450.0 140mm (5.511") 136mm (5.354") FP3535 350.0 X 350.0 90mm (3.543") 70mm (2.755") FP3545 350.0 X 450.0 140mm (5.511") 136mm (5.354") FP3550 350.0 X 500.0 165mm (6.496") 161mm (6.338") FP3560 350.0 X 600.0 215mm (8.464") 211mm (8.307") FP4040 400.0 X 400.0 115mm (4.527") 95mm (3.74") FP4050 400.0 X 500.0 165mm (6.496") 161mm (6.338") FP4060 400.0 X 600.0 215mm (8.464") 211mm (8.307") FP4070 400.0 X 700.0 265mm (10.433") 261mm (10.275") FP4545 450.0 X 450.0 140mm (5.511") 136mm (5.354") FP4555 450.0 X 550.0 190mm (7.480") 186mm (7.322") FP4560 450.0 X 600.0 215mm (8.464") 211mm (8.307") FP5050 500.0 X 500.0 165mm (6.496") 161mm (6.338") FP5070 500.0 X 700.0 265mm (10.433") 261mm (10.275") FP5555 550.0 X 550.0 190mm (7.480") 186mm (7.322") FP5565 550.0 X 650.0 240mm (9.448") 236mm (9.291") FP5575 550.0 X 750.0 290mm (11.417") 286mm (11.259") FP6060 600.0 X 600.0 215mm (8.464") 211mm (8.307") FP6070 600.0 X 700.0 265mm (10.433") 261mm (10.275") FP6080 600.0 X 800.0 315mm (12.401") 311mm (12.244") FP6565 650.0 X 650.0 240mm (9.448") 236mm (9.291") FP6575 650.0 X 750.0 290mm (11.417") 286mm (11.259") FP7070 700.0 X 700.0 265mm (10.433") 261mm (10.275") FP7080 700.0 X 800.0 315mm (12.401") 311mm 12.244")

N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A

N/A 95mm (3.74") 95mm (3.74") 95mm (3.74") 95mm (3.74") 136mm (5.354") 136mm (5.354") 136mm (5.354") 161mm (6.338") 161mm (6.338") 186mm (7.322") 186mm (7.322") 186mm (7.322") 211mm (8.307") 211mm (8.307") 236mm (9.291") 236mm (9.291") 236mm (9.291") 261mm (10.275") 261mm (10.275")

2A-Type

O P E R

T O R

2B-Type

O P E R A

Length

O R

2C-Type

O P E R

T O R

TOP

Leng t h

Wid t h

TOP

Width

TOP

Leng t h

FP-series 2006.07

Please confirm all dimensions and nozzle suitability by referring to www.hotrunners.com or by calling Husky.

Wid t h

PRONTO

Part #

Width x

Length

FP2540 250.0 X 400.0 FP2545 250.0 X 450.0 Y - 45mm (1.772") Y - 57mm (2.244") FP2550 250.0 X 500.0 FP2730 270.0 X 300.0 FP2735 270.0 X 350.0 FP2740 270.0 X 400.0 FP2750 270.0 X 500.0 Y - 45mm (1.772") Y - 57mm (2.244") FP2930 290.0 X 300.0 FP2935 290.0 X 350.0 FP2940 290.0 X 400.0 FP3030 300.0 X 300.0 FP3035 300.0 X 350.0 FP3045 300.0 X 450.0 Y - 45mm (1.772") Y - 57mm (2.244") FP3055 300.0 X 550.0 Y - 45mm (1.772") Y - 57mm (2.244") FP3060 300.0 X 600.0 Y - 45mm (1.772") Y - 57mm (2.244") FP3335 330.0 X 350.0 FP3345 330.0 X 450.0 Y - 45mm (1.772") Y - 57mm (2.244") FP3535 350.0 X 350.0 FP3545 350.0 X 450.0 Y - 45mm (1.772") Y - 57mm (2.244") FP3550 350.0 X 500.0 Y - 45mm (1.772") Y - 57mm (2.244") FP3560 350.0 X 600.0 Y - 45mm (1.772") Y - 57mm (2.244") FP4040 400.0 X 400.0 FP4050 400.0 X 500.0 Y - 45mm (1.772") Y - 57mm (2.244") FP4060 400.0 X 600.0 Y - 45mm (1.772") Y - 57mm (2.244") FP4070 400.0 X 700.0 Y - 45mm (1.772") Y - 57mm (2.244") FP4545 450.0 X 450.0 Y - 45mm (1.772") Y - 57mm (2.244") FP4555 450.0 X 550.0 Y - 45mm (1.772") Y - 57mm (2.244") FP4560 450.0 X 600.0 Y - 45mm (1.772") Y - 57mm (2.244") FP5050 500.0 X 500.0 Y - 45mm(1.772") Y - 57mm (2.244") FP5070 500.0 X 700.0 Y - 45mm (1.772") Y - 57mm (2.244") FP5555 550.0 X 550.0 Y - 45mm (1.772") Y - 57mm (2.244") FP5565 550.0 X 650.0 Y - 45mm (1.772") Y - 57mm (2.244") FP5575 550.0 X 750.0 Y - 45mm (1.772") Y - 57mm (2.244") FP6060 600.0 X 600.0 Y - 45mm (1.772") Y - 57mm (2.244") FP6070 600.0 X 700.0 Y - 45mm (1.772") Y - 57mm (2.244") FP6080 600.0 X 800.0 Y - 45mm (1.772") Y - 57mm (2.244") FP6565 650.0 X 650.0 Y - 45mm (1.772") Y - 57mm (2.244") FP6575 650.0 X 750.0 Y - 45mm (1.772") Y - 57mm (2.244") FP7070 700.0 X 700.0 Y - 45mm (1.772") Y - 57mm (2.244") FP7080 700.0 X 800.0 Y - 45mm (1.772") Y - 57mm (2.244")

4L-Type Max. ’X’

(HT)

N/A N/A N/A

N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A

N/A N/A N/A

4L-Type Max. ’X’

(VG)

4L-Type Max. ’Y’

136mm (5.354")

161mm (6.338")

136mm (5.354") 186mm (7.322") 21 1mm (8.307")

136mm (5.354")

136mm (5.354") 161mm (6.338") 21 1mm (8.307")

161mm (6.338") 21 1mm (8.307") 261mm (10.275") 136mm (5.354") 186mm (7.322") 21 1mm (8.307") 161mm (6.338") 261mm (10.275") 186mm (7.322") 236mm (9.291") 286mm (11.259") 21 1mm (8.307") 261mm (10.275") 311mm (12.244") 236mm (9.291") 286mm (11.259") 261mm (10.275") 311mm (12.244")

Min ’X’ and ’Y’ for 4L-Type: For thermal gates (HT & TS) X = 60mm (2.362"), Y = X + 45 mm (1.772") For valve gates (VG & VX) X = 70mm (2.756") Y = X + 57mm (2.244")

4L-Type

O P E R A

Length

T O R

TOP

Width

Please confirm all dimensions and nozzle suitability by referring to www.hotrunners.com or by calling Husky.

FP-series 2006.07

PRONTO

Part # Width x Length 4H-Type Max. ’X1’ 4H-Type Max. ’Y1’

FP2530 250.0 X 500.0 N/A N/A FP2730 270.0 X 300.0 N/A N/A FP2735 270.0 X 350.0 N/A N/A FP2740 270.0 X 400.0 N/A N/A FP2750 270.0 X 500.0 N/A N/A FP2930 290.0 X 300.0 N/A N/A FP2935 290.0 X 350.0 54mm (2.126") 52mm (2.047") FP2940 290.0 X 400.0 54mm (2.126") 79mm (3.110") FP3030 300.0 X 300.0 N/A N/A FP3035 300.0 X 350.0 59mm (2.323") 53mm (2.087") FP3045 300.0 X 450.0 59mm (2.323") 104mm (4.094") FP3055 300.0 X 550.0 59mm (2.323") 154mm (6.063") FP3060 300.0 X 600.0 59mm (2.323") 179mm (7.047") FP3335 330.0 X 350.0 52mm (2.047") 56mm (2.205") FP3345 330.0 X 450.0 52mm (2.047") 106mm (4.173") FP3535 350.0 X 350.0 61mm (2.402") 56mm (2.205") FP3545 350.0 X 450.0 61mm (2.402") 106mm (4.173") FP3550 350.0 X 500.0 56mm (2.205") 131mm (5.157") FP3560 350.0 X 600.0 56mm (2.205") 181mm (7.126") FP4040 400.0 X 400.0 80mm (3.150") 81mm (3.189") FP4050 400.0 X 500.0 80mm (3.150") 131mm (5.157") FP4060 400.0 X 600.0 80mm (3.150") 181mm (7.126") FP4070 400.0 X 700.0 80mm (3.150") 231mm (9.094") FP4545 450.0 X 450.0 97mm (3.819") 106mm (4.173") FP4555 450.0 X 550.0 97mm (3.819") 156mm (6.142") FP4560 450.0 X 600.0 97mm (3.819") 181mm (7.126") FP5050 500.0 X 500.0 119mm (4.685") 131mm (5.157") FP5070 500. 0 X 700 .0 119mm (4.685") 231mm (9.0 94") FP5555 550.0 X 550.0 133mm (5.236") 156mm (6.142") FP5565 550. 0 X 650 .0 133mm (5.236") 206mm (8.1 10") FP5575 550.0 X 750.0 133mm (5.236") 256mm (10.079") FP6060 600.0 X 600.0 159mm (6.260") 181mm (7.126") FP6070 600.0 X 700.0 159mm (6.260") 231mm (9.094") FP6080 600. 0 X 800 .0 159mm (6.260") 281mm (11.063") FP6565 650.0 X 650.0 173mm (6.811") 206mm (8.110") FP6575 650.0 X 750.0 173mm (6.811") 256mm (10.079") FP7070 700.0 X 700.0

191mm (7.520") 231mm (9.0 94")

FP7080 700.0 X 800.0 191mm (7.520") 281mm (11.063")

4H-Type

Operator

Length

Top

Width

Min ’X’ and ’Y’ for 4H-Type: For all gating styles and nozzle series X2 = 50.0 mm, Y2 = 50.0 mm

Please confirm all dimensions and nozzle suitability by referring to www.hotrunners.com or by calling Husky.

FP-series 2006.07

PRONTO

Part # Width x Length 4H-Type Max. ’X2’ 4H-Type Max. ’Y2’

FP2530 250.0 X 500.0 N/A N/A FP2730 270.0 X 300.0 N/A N/A FP2735 270.0 X 350.0 N/A N/A FP2740 270.0 X 400.0 N/A N/A FP2750 270.0 X 500.0 N/A N/A FP2930 290.0 X 300.0 N/A N/A FP2935 290.0 X 350.0 54mm (2.126") 52mm (2.047") FP2940 290.0 X 400.0 54mm (2.126") 79mm (3.110") FP3030 300.0 X 300.0 N/A N/A FP3035 300.0 X 350.0 59mm (2.323") 53mm (2.087") FP3045 300.0 X 450.0 59mm (2.323") 104mm (4.094") FP3055 300.0 X 550.0 59mm (2.323") 154mm (6.063") FP3060 300.0 X 600.0 59mm (2.323") 179mm (7.047") FP3335 330.0 X 350.0 52mm (2.047") 56mm (2.205") FP3345 330.0 X 450.0 74mm (2.913") 94mm (3.701") FP3535 350.0 X 350.0 61mm (2.402") 56mm (2.205") FP3545 350.0 X 450.0 84mm (3.307") 94mm (3.701") FP3550 350.0 X 500.0 84mm (3.307") 109mm (4.291") FP3560 350.0 X 600.0 84mm (3.307") 159mm (6.260") FP4040 400.0 X 400.0 109mm (4.291") 56mm (2.205") FP4050 400.0 X 500.0 109mm (4.291") 106mm (4.173") FP4060 400. 0 X 600 .0 109mm (4.291") 154mm (6.0 63") FP4070 400.0 X 700.0 109mm (4.291") 206mm (8.110") FP4545 450. 0 X 450 .0 134mm (5.276") 71mm (2.795") FP4555 450.0 X 550.0 134mm (5.276") 121mm (4.764") FP4560 450. 0 X 600 .0 134mm (5.276") 146mm (5.7 48") FP5050 500.0 X 500.0 159mm (6.260") 93mm (3.661") FP5070 500.0 X 700.0 159mm (6.260") 193mm (7.598") FP5555 550.0 X 550.0 184mm (7.244") 98mm (3.858") FP5565 550.0 X 650.0 184mm (7.244") 148mm (5.827") FP5575 550.0 X 750.0 184mm (7.244") 198mm (7.795") FP6060 600. 0 X 600 .0 209mm (8.228") 126mm (4.9 61") FP6070 600.0 X 700.0 209mm (8.228") 176mm (6.929") FP6080 600. 0 X 800 .0 209mm (8.228") 226mm (8.8 98") FP6565 650.0 X 650.0 234mm (9.213") 153mm (6.024") FP6575 650. 0 X 750 .0 234mm (9.213") 203mm (7.9 92") FP7070 700.0 X 700.0

259mm (10.197") 161mm (6.339")

FP7080 700.0 X 800.0 211mm (8.307") 259mm (10.197")

4H-Type

Operator

Length

Top

Width

Min ’X’ and ’Y’ for 4H-Type: For all gating styles and nozzle series X2 = 50.0 mm, Y2 = 50.0 mm

Please confirm all dimensions and nozzle suitability by referring to www.hotrunners.com or by calling Husky.

FP-series 2006.07

PRONTO

Part # Width x Length

8H-Type Max.

’X’

FP2540 250.0 X 400.0 N/A N/A N/A FP2545 250.0 X 450.0 N/A N/A N/A

8H-Type Max.

’Y1’

8H-Type Max.

’Y2’

8H-Type

Top

FP2550 250.0 X 500.0 N/A N/A N/A FP2730 270.0 X 300.0 N/A N/A N/A FP2735 270.0 X 350.0 N/A N/A N/A FP2740 270.0 X 400.0 N/A N/A N/A FP2750 270.0 X 500.0 N/A N/A N/A FP2930 290.0 X 300.0 N/A N/A N/A FP2935 290.0 X 350.0 N/A N/A N/A FP2940 290.0 X 400.0 N/A N/A N/A

O erator

FP3030 300.0 X 300.0 N/A N/A N/A

FP3035 300.0 X 350.0 N/A N/A N/A

FP3045 300.0 X 450.0 N/A N/A N/A FP3055 300.0 X 550.0 N/A N/A N/A FP3060 300.0 X 600.0 N/A N/A N/A FP3335 330.0 X 350.0 N/A N/A N/A FP3345 330.0 X 450.0 N/A N/A N/A FP3535 350.0 X 350.0 N/A N/A N/A FP3545 350.0 X 450.0 N/A N/A N/A FP3550 350.0 X 500.0 92mm(3.622") Y2-62mm(1.0") 129mm(5.079") FP3560 350.0 X 600.0 92mm(3.622") Y2-62mm(1.0") 179mm(7.047") FP4040 400.0 X 400.0 N/A N/A N/A FP4050 400.0 X 500.0 117mm(4.606") Y2-62mm(1.0") 129mm(5.079") FP4060 400.0 X 600.0 117mm(4.606") Y2-62mm(1.0") 179mm(7.047") FP4070 400.0 X 700.0 117mm(4.606") Y2-62mm(1.0") 229mm(9.016") FP4545 450.0 X 450.0 N/A N/A N/A FP4555 450.0 X 550.0 142mm(5.591") Y2-62mm(1.0") 154mm(6.063") FP4560 450.0 X 600.0 142mm(5.591") Y2-62mm(1.0") 179mm(7.047") FP5050 500.0 X 500.0 167mm (6.575") Y2-62mm(1.0") 129mm(5.079") FP5070 500.0 X 700.0 167mm (6.575") Y2-62mm(1.0") 229mm(9.016") FP5555 550.0 X 550.0 192mm (7.559") Y2-62mm(1.0") 154mm(6.063") FP5565 550.0 X 650.0 192mm (7.559") Y2-62mm(1.0") 179mm(7.047") FP5575 550.0 X 750.0 192mm (7.559") Y2-62mm(1.0") 229mm(9.016") FP6060 600.0 X 600.0 192mm (7.559") Y262mm(1.0") 229mm(9.016") FP6070 600.0 X 700.0 192mm (7.559") Y2-62mm(1.0") 229mm(9.016") FP6080 600.0 X 800.0 192mm (7.559") Y2-62mm(1.0") 229mm(9.016") FP6565 650.0 X 650.0 192mm (7.559") Y2-62mm(1.0") 229mm(9.016") FP6575 650.0 X 750.0 192mm (7.559") Y2-62mm(1.0") 229mm(9.016") FP7070 700.0 X 700.0 192mm (7.559") Y2-62mm(1.0") 229mm(9.016") FP7080 700.0 X 800.0 192mm (7.559") Y2-62mm(1.0") 229mm(9.016")

Minimum Dimensions for 8H Type: Min ’X’ > 73mm (2.87") / Min ’Y1’ > 61.3mm (2.41") / Min ’Y2’>Y1+62mm (2.44")

Please confirm all dimensions and nozzle suitability by referring to www.hotrunners.com or by calling Husky.

FP-series 2006.07

PRONTO

Part # Width x Length

8H-Type Max.

’X’

8H-Type Max.

’Y1’

8H-Type Max.

’Y2’

FP2540 250.0 X 400.0 N/A N/A N/A FP2545 250.0 X 450.0 N/A N/A N/A FP2550 250.0 X 500.0 N/A N/A N/A FP2730 270.0 X 300.0 N/A N/A N/A FP2735 270.0 X 350.0 N/A N/A N/A FP2740 270.0 X 400.0 N/A N/A N/A FP2750 270.0 X 500.0 N/A N/A N/A FP2930 290.0 X 300.0 N/A N/A N/A FP2935 290.0 X 350.0 N/A N/A N/A FP2940 290.0 X 400.0 N/A N/A N/A FP3030 300.0 X 300.0 N/A N/A N/A FP3035 300.0 X 350.0 N/A N/A N/A FP3045 300.0 X 450.0 N/A N/A N/A FP3055 300.0 X 550.0 N/A N/A N/A FP3060 300.0 X 600.0 N/A N/A N/A FP3335 330.0 X 350.0 N/A N/A N/A FP3345 330.0 X 450.0 N/A N/A N/A FP3535 350.0 X 350.0 N/A N/A N/A FP3545 350.0 X 450.0 N/A N/A N/A FP3550 350.0 X 500.0 92mm(3.622") Y2-62mm(1.77") 129mm(5.079") FP3560 350.0 X 600.0 92mm(3.622") Y2-62mm(1.77") 179mm(7.047") FP4040 400.0 X 400.0 N/A N/A N/A FP4050 400.0 X 500.0 117mm(4.606") Y2-62mm(1.77") 129mm(5.079") FP4060 400.0 X 600.0 117mm(4.606") Y2-62mm(1.77") 179mm(7.047") FP4070 400.0 X 700.0 117mm(4.606") Y2-62mm(1.77") 229mm(9.016") FP4545 450.0 X 450.0 N/A N/A N/A FP4555 450.0 X 550.0 142mm(5.591")

Y2-62mm(1.77") 154mm(6.063") FP4560 450.0 X 600.0 142mm(5.591") Y2-62mm(1.77") 179mm(7.047") FP5050 500.0 X 500.0 167mm (6.575") Y2-62mm(1.77") 129mm(5.079") FP5070 500.0 X 700.0 167mm (6.575") Y2-62mm(1.77") 229mm(9.016") FP5555 550.0 X 550.0 192mm (7.559") Y2-62mm(1.77") 154mm(6.063") FP5565 550.0 X 650.0 192mm (7.559") Y2-62mm(1.77") 179mm(7.047") FP5575 550.0 X 750.0 192mm (7.559")

Y2-62mm(1.77") 229mm(9.016") FP6060 600.0 X 600.0 192mm (7.559") Y2-62mm(1.77") 179mm(7.047") FP6070 600.0 X 700.0 192mm (7.559") Y2-62mm(1.77") 229mm(9.016") FP6080 600.0 X 800.0 192mm (7.559") Y2-62mm(1.77") 229mm(9.016") FP6565 650.0 X 650.0 192mm (7.559") Y2-62mm(1.77") 179mm(7.047") FP6575 650.0 X 750.0 192mm (7.559") Y2-62mm(1.77") 229mm(9.016") FP7070 700.0 X 700.0 192mm (7.559")

Y2-62mm(1.77") 229mm(9.016") FP7080 700.0 X 800.0 192mm (7.559") Y2-62mm(1.77") 229mm(9.016))

8H-Type

Operator

Top

Minimum Dimensions for 8H Type: Min ’X’ > 73mm (2.87") / Min ’Y1’ > 61.3mm (2.41") / Min ’Y2’>Y1+62mm (2.44")

Please confirm all dimensions and nozzle suitability by referring to www.hotrunners.com or by calling Husky.

FP-series 2006.07

PRONTO

Part # Width x Length

8H-Type Max.

’X’

8H-Type Max.

’Y1’

8H-Type Max.

’Y2’

N/A N/A N/A FP3535 350.0 X 350.0 N/A N/A N/A FP3545 350.0 X 450.0 N/A N/A N/A FP3550 350.0 X 500.0 92mm(3.622") Y2-62mm(1.97") 129mm(5.079") FP3560 350.0 X 600.0 92mm(3.622") Y2-62mm(1.97") 179mm(7.047") FP4040 400.0 X 400.0 N/A N/A N/A FP4050 400.0 X 500.0 117mm(4.606")

Y2-62mm(1.97") 129mm(5.079") FP4060 400.0 X 600.0 117mm(4.606") Y2-62mm(1.97") 179mm(7.047") FP4070 400.0 X 700.0 117mm(4.606")

Y2-62mm(1.97") 229mm(9.016") FP4545 450.0 X 450.0 N/A N/A N/A FP4555 450.0 X 550.0 142mm(5.591")

Y2-62mm(1.97") 154mm(6.063") FP4560 450.0 X 600.0 142mm(5.591") Y2-62mm(1.97") 179mm(7.047") FP5050 500.0 X 500.0 167mm (6.575")

Y2-62mm(1.97") 129mm(5.079") FP5070 500.0 X 700.0 167mm (6.575") Y2-62mm(1.97") 229mm(9.016") FP5555 550.0 X 550.0 192mm (7.559")

Y2-62mm(1.97") 154mm(6.063") FP5565 550.0 X 650.0 192mm (7.559") Y2-62mm(1.97") 179mm(7.047") FP5575 550.0 X 750.0 192mm (7.559")

Y2-62mm(1.97") 229mm(9.016") FP6060 600.0 X 600.0 192mm (7.559") Y2-62mm(1.97") 179mm(7.047") FP6070 600.0 X 700.0 192mm (7.559")

Y2-62mm(1.97") 229mm(9.016") FP6080 600.0 X 800.0 192mm (7.559") Y2-62mm(1.97") 279mm(10.98") FP6565 650.0 X 650.0 192mm (7.559")

Y2-62mm(1.97") 179mm(7.047") FP6575 650.0 X 750.0 192mm (7.559") Y2-62mm(1.97") 229mm(9.016") FP7070 700.0 X 700.0 192mm (7.559")

Y2-62mm(1.97") 229mm(9.016") FP7080 700.0 X 800.0 192mm (7.559") Y2-62mm(1.97")) 279mm(10.98")

8H-Type

Operator

Top

Minimum Dimensions for 8H Type: Min ’X’ > 73mm (2.87") / Min ’Y1’ > 61.3mm (2.41") / Min ’Y2’>Y1+62mm (2.44")

Please confirm all dimensions and nozzle suitability by referring to www.hotrunners.com or by calling Husky.

FP-series 2006.07

PRONTO

7")

STEP 2 - Select the gating method Pronto hot runners are available with the Ultra 500 or Ultra 750 nozzles in HT, TS, VG, or VX gating styles. Please refer to www.hotrunners.com or the Hot Runner Design Center for details about each nozzle/gating style.

STEP 3 - Ensure the desired L-dimension is within the allowable guidelines of the gating method.

Available L-Dimensions (Ultra 500)

HT-D/HT-T/HT-U/HT-X/HT-DC HT-X VG VX

Min 17mm (0.67") 27mm (1.06") 17mm (0.67") 17mm (0.67")

Max 124mm (4.88") 134mm (5.28") 124mm (4.88") 124mm (4.88")

For 2 and 4 Drop Configurations

Thermal Gate (HT)

Valve Gate (VG & VX)

VG available with 1.0mm (0.039"),

1.2mm (0.047"), 1.5mm (0.059"), or

1.8 mm (0.071")gate diameter as standard

Plate Thickness

L-Dimension

Plate Thickness

For 8 Drop Configurations

(1.5

40m

32mm

(1.26")

95mm-105mm

60mm

(3.74" - 4.13")

L-Dimension

(2.36")

115mm - 125mm

(4.53" - 4.97")

60mm

(2.36")

95mm-105mm

(3.74" - 4.13")

L-Dimension

For exact plate thickness, please contact Husky. NOTE: The hot runner Guide Pin (4) will protrude from the manifold plate up to 15mm more than the selected

L-dimension. Be sure that enough clearance has been left in the mold plates for the full length of this Guide Pin.

Please confirm all dimensions and nozzle suitability by referring to www.hotrunners.com or by calling Husky.

FP-series 2006.07

115mm - 125mm

(4.53" - 4.97")

+ 42 hidden pages