Hunter Fan HTF2202 Owner Manual

Download

Page 1

30 inches

7 feet

Ladder

Table of Contents

www.HunterFan.com

1.888.830.1326

Congratulations on purchasing your new Hunter® ceiling fan! It will provide comfort

and performance in your home or ofce for

many years. This installation and operation manual contains complete instructions for installing and operating your fan.

We are proud of our work and appreciate the opportunity to supply you with the best ceiling fan available anywhere in the world.

To register your fan, please visit:

www.HunterFan.com/register

Save your receipt for proof of purchase.

What to Expect with

Your Installation

Tools Needed

PAG E

Wiring CanopyDownrod

Light Kit

Mounting Options

PAG E

Maintenance,

Operation & Cleaning

Ceiling Bracket

PAG E

Blade

PAG E

Troubleshooting

PAG E

Page 2

What to Expect with Your Installation

www.HunterFan.com

1.888.830.1326

Must be able to secure the fan to building structure or fan-rated outlet box

You may need a friend to help you.

Check box to see fan weight

If you are unfamiliar with wiring, use a

qualied electrician.

Know your wiring

Ceiling angles greater than 34° will require an Angled Mounting Kit. See page 4 for details.

Assess ceiling angle

30 inches

from blade tip to nearest wall or obstruction

Assess location

Standard Downrod

for ceilings 8-10 feet high

Shorter Downrod

for fans installed close to ceiling

Longer Downrod

for ceilings 10 feet or higher

Select a downrod length

7 feet

from bottom

edge of blade

to the oor

Read and Save These Instructions

This product conforms to UL Standard 507.

WARNINGS

w.1 - To reduce the risk of re, electrical shock, or

personal injury, mount fan directly from building structure and/or an outlet box marked acceptable for fan support of 70 lbs (31.8 kg) and use the mounting screws provided with the outlet box.

w.2 - To avoid possible electrical shock, before installing or servicing your fan, disconnect the power by turning off the circuit breakers to the outlet box and associated wall switch location. If you cannot lock the circuit breakers in the off position, securely fasten a prominent warning device, such as a tag, to the service panel.

w.3 - To reduce the risk of re, electrical shock, or motor damage, use only Hunter Solid State Speed Controls.

w.4 - To reduce the risk of personal injury, do not bend the blade brackets when installing the blade brackets, balancing the blades, or cleaning the fan. Do not insert foreign objects in between rotating fan blades.

CAUTIONS

c.1 - All wiring must be in accordance with national and local electrical codes ANSI/NFPA 70. If you are unfamiliar

with wiring, use a qualied electrician.

c.2 - Use only Hunter replacement parts.

Page 3

Tools Needed

www.HunterFan.com

1.888.830.1326

Ladder

Screwdrivers

Pliers Wire Strippers

Power Drill

(optional)

If mounting to a support structure, you will also need these tools.

9/64” Drill Bit

(optional)

Do not discard the hardware bags or mix

parts from different bags. Make note of

the symbol printed on each hardware

bag. The symbols can be used to identify

the appropriate hardware for each step.

Page 4

CEILING

Mounting Options

www.HunterFan.com

1.888.830.1326

OPTION

If you have a at ceiling:

WALL

Hang your fan by a standard downrod (included).

Standard Mounting

Support Structure

OPTION

If you have an angled ceiling:

1. You will need a longer downrod (sold separately).

2. If your ceiling angle is greater than 34°, you will also need an Angled Mounting Kit (sold separately).

Use the three steps below to determine if your ceiling angle is greater than 34°

Angled Mounting

Standard Mounting Style

Ceiling

Outlet Box

(required)

Angled Mounting Style

Ceiling

Outlet Box

(required)

FOLD

on dotted line

34°

Guide Touches

BOTH Ceiling & Wall

You need ONLY

a Longer

Downrod

*most common

2 3

PLACE

against wall

Guide Touches

but NOT Ceiling

You need BOTH

a Longer

Downrod &

an Angled

Mounting Kit

SLIDE

toward ceiling

Wall

to hang the fan from a at ceiling.

Use Standard Mounting

or Low-Prole Mounting

Use Angled Mounting

to hang the fan from a

vaulted or angled ceiling.

Page 5

Ceiling Bracket

Turn Power

OFF

www.HunterFan.com

For angled ceilings, point

opening toward peak.

1.888.830.1326

Make sure all four bumpers are

still attached.

To avoid possible electrical shock, before installing your fan, disconnect the power by turning off the circuit breakers to the outlet

box associated with the wall switch location.

Use wood screws (included) when securing to support structure with approved electrical outlet

box. Drill 9/64” pilot holes in support structure to aid in securing ceiling bracket

with hardware found in

the hardware bag.

Use machine screws

(provided with outlet

box) when securing to

existing ceiling fan-rated

outlet box. Make sure

it is securely installed

and is acceptable for fan

support of 31.8 kg (70 lbs)

or less.

If you are unable to do this,

call Technical Support at

1-888-830-1326.

Refer to warning w.1 on pg. 2

Page 6

Downrod

www.HunterFan.com

1.888.830.1326

Standard Downrod

for ceilings 8-10’ high

Option 1Option 2

Shorter Downrod

for fans installed close to ceiling

Included

(pre-assembled)

Longer Downrod

for angled ceilings or

Option 3

ceilings 10’ or higher

skip to next page

If you need a different downrod length follow these steps:

Steps 1-5 to remove standard downrod pipe

1 2 3 4 5

Slide

678910

Included

Sold Separately

Steps 6-10 to reassemble with new pipe

Page 7

Downrod (continued)

KEEP!

www.HunterFan.com

1.888.830.1326

Top Housing

Adapter

Remove the pre-installed setscrew so

that the downrod can be inserted.

Thread the wires through the top

housing. Place the top housing onto

the motor housing so that the holes in

the top housing lineup with the holes

in the motor housing and the adapter.

Install the three top housing screws.

8”

Hand tighten the downrod (at

least 4-5 full turns) until it stops.

3/8”

Page 8

Downrod (continued)

Put the wires and downrod through the

canopy. Let the canopy sit loosely on top

www.HunterFan.com

1.888.830.1326

3/8”

8”

(not to scale)

The wires can be cut, but

leave at least 8” extending

from the top of the downrod.

Tighten the setscrew

with pliers. DO NOT

HAND TIGHTEN.

of the fan.

If the setscrew is not tightened securely, the fan may fall.

Page 9

Downrod (continued)

DO NOT PICK THE FAN UP BY THE

www.HunterFan.com

1.888.830.1326

CANOPY OR WIRES. Place the downrod

ball into the slot in the ceiling bracket.

Note: Fan style may vary.

Page 10

Wiring

White

(Ungrounded)

Black

Blue

(Grounded)

(Ungrounded)

Using an orange wire

connector from

the hardware bag,

connect the 3 grounding

wires (green, green/

yellow stripe, or bare

copper) coming from the

ceiling, downrod, and

hanging bracket.

Green/Yellow Stripe

(Grounding)

Green/Yellow

Stripe

Note: To connect the wires,

www.HunterFan.com

1.888.830.1326

hold the bare metal leads

together and place a wire

connector over them, then twist

clockwise until tight.

(Grounded)

(Ungrounded)

For Dual Switches

Using the orange wire

connectors from

the hardware bag,

For a Single Switch

Using the orange wire

White

Blue

Black

connectors from

the hardware bag, connect

the black wire (ungrounded)

from the ceiling to the black

and the blue wires from the fan. Connect the white wire

(grounded) from the ceiling to

the white wire from the fan.

connect the white wire

(grounded) from the

ceiling to the white wire

from the fan. Connect the black wire (ungrounded) from the

ceiling to the black wire

from the fan. Connect the

second (ungrounded) wire

from the ceiling to the blue

wire from the fan.

Refer to CAUTION c.1 on pg. 2

Turn the splices upward and push them carefully back through the hanger bracket into the outlet box. Spread the wires apart, with the grounded wires on one side of

the outlet box and the ungrounded wires on the other side of the outlet box.

Page 11

Canopy

Screw

Holes

www.HunterFan.com

1.888.830.1326

Position the canopy so that, when

lifted into place, the canopy ts into

the hanging bracket as shown.

Lift the canopy into place so that

the screw holes are aligned.

Insert the two canopy screws

found in the hardware bag.

Note: Fan style may vary.

Page 12

Blades

www.HunterFan.com

1.888.830.1326

Put each blade washer, found in

the hardware bag, onto a blade screw,

found in the hardware bag. Then secure

each blade to a blade iron using the blade

screws and washers.

Page 13

Light Kit

www.HunterFan.com

1.888.830.1326

Partially install two light kit assembly

screws, found in the hardware bag,

halfway into the motor housing as

shown. It does not matter which two

screw holes you choose.

Feed the 9-pin plug connector coming from

the bottom of the motor housing through

the center hole in the light kit assembly.

Connect it to the plug connector found

in the switch housing area of the light kit

assembly. Make sure to line up the colored

markings on the connectors.

Align the keyhole slots in the top of

the light kit assembly with the partially

installed assembly screws. Wrap the

keyhole slots around the screws and

twist counterclockwise.

Page 14

Light Kit (continued)

www.HunterFan.com

1.888.830.1326

Insert a third light kit assembly screw,

found in the hardware bag, into place

and tighten all three screws securely.

Make sure the light kit assembly is securely attached to the motor housing. Failure to properly secure all three assembly

screws could result in the light xture falling.

Carefully push all switch housing

components into the switch housing,

then install the switch housing plate

using two light kit assembly screws,

found in the hardware bag.

Install a bulb into each of the sockets. When

necessary, replace with bulbs of the same wattage.

Page 15

Light Kit (continued)

Tab

Notch

www.HunterFan.com

CONGRATULATIONS!

YOU’RE DONE!

1.888.830.1326

Align the notches in the outer rim of the

globe with the tabs on the light kit assembly

Carefully lift the globe up inside the light

xture as far as it will go. Rotate the globe in

a clockwise direction until it is held tightly in

place by the three tabs.

Remove and discard the plastic connectors

from the ends of the short pull chain. Connect

the appropriate pull chain pendant to each of

the short chains. The fan pull chain controls

the speed: from high to off. The light pull

chain controls the light xture: on and off.

See next page for fan operation instructions.

Page 16

Maintenance, Operation, & Cleaning

Turn Power

Reverse Switch

www.HunterFan.com

1.888.830.1326

Changing the bulbs - carefully

remove the globe. Unscrew the

bulbs and replace them with

bulbs of the same wattage.

Reinstall the globe.

Changing the direction of

air ow - carefully remove the

globe and move the reverse

switch to the opposite position.

Reinstall the globe.

Cleaning the fan - use soft

brushes or cloths to prevent

scratching. Cleaning products

may damage the nishes.

Page 17

Troubleshooting

www.HunterFan.com

1.888.830.1326

Fan doesn’t work

• Make sure power switch is on.

• Pull the pull chain to make sure it is on.

• Push the motor reversing switch

rmly left or right to ensure that

it is engaged.

• Check the circuit breaker to ensure the power is turned on.

• Make sure the blades spin freely.

• Turn off power from the circuit breaker, then loosen the canopy and check all the connections according to the wiring diagram on page 11.

• Check the plug connection in the switch housing.

Excessive wobbling

• Tighten all of the blade and blade iron screws until they are snug.

• Use the provided balancing kit and instructions to balance the fan.

Noisy Operation

• Tighten the blade and blade iron screws until they are snug.

• Check to see if any of the blades are cracked. If so, replace all of the blades.

Hunter Fan HTF2202 Owner Manual

Specifications and Main Features

Frequently Asked Questions

User Manual