Hunter Fan HTF2096 Owner Manual

Download

Page 1

30 inches

7 feet

Ladder

Table of Contents

www.HunterFan.com

1.888.830.1326

Congratulations on purchasing your new Hunter® ceiling fan! It will provide comfort and performance

in your home or ofce for many

years. This installation and operation manual contains complete instructions for installing and operating your fan.

We are proud of our work and appreciate the opportunity to supply you with the best ceiling fan available anywhere in the world.

To register your fan, please visit:

www.HunterFan.com/register

Save your receipt for proof of purchase.

What to Expect with

Your Installation

Preparation

Blades Troubleshooting

Tools Needed

PAG E

Downrod

PAG E

Switch Housing

Mounting Options

PAG E

Wiring Canopy

PAG E

Maintenance

& Cleaning

Ceiling Bracket

PAG E

M0087-01 • 04/12/18 • © Hunter Fan Company

PAG E

Page 2

What to Expect with Your Installation

www.HunterFan.com

1.888.830.1326

1.888.830.13261.888.830.1326

Must be able to secure the fan to building structure or fan-rated outlet box

You may need a friend to help you.

Check box to see fan weight

If you are unfamiliar with wiring, use a

qualied electrician.

Know your wiring

Ceiling angles greater than 34° will require an Angled Mounting Kit. See page 4 for details.

Assess ceiling angle

30 inches

from blade tip to nearest wall or obstruction

Assess location

Standard Downrod

for ceilings 8-10 feet high

Shorter Downrod

for fans installed close to ceiling

Longer Downrod

for ceilings 10 feet or higher

Select a downrod length

7 feet

from bottom

edge of blade

to the oor

Read and Save These Instructions

This product conforms to UL Standard 507.

WARNINGS

w.1 - To reduce the risk of re, electrical shock, or

personal injury, mount fan directly from building structure and/or an outlet box marked acceptable for fan support of 70 lbs (31.8 kg) and use the mounting screws provided with the outlet box.

w.2 - To avoid possible electrical shock, before installing or servicing your fan, disconnect the power by turning off the circuit breakers to the outlet box and associated wall switch location. If you cannot lock the circuit breakers in the off position, securely fasten a prominent warning device, such as a tag, to the service panel.

w.3 - To reduce the risk of re, electrical shock, or motor damage, use only Hunter Solid State Speed Controls.

w.4 - To reduce the risk of personal injury, do not bend the blade brackets when installing the blade brackets, balancing the blades, or cleaning the fan. Do not insert foreign objects in between rotating fan blades.

w.5 - Use only with light kits marked “Suitable for wet locations.”

CAUTIONS

c.1 - All wiring must be in accordance with national and local electrical codes ANSI/NFPA 70. If you are unfamiliar

with wiring, use a qualied electrician.

c.2 - Use only Hunter replacement parts.

M0087-01 • 04/12/18 • © Hunter Fan Company

Page 3

Tools Needed

www.HunterFan.com

1.888.830.1326

Ladder

Screwdrivers

Pliers Wire Strippers

Power Drill

(optional)

If mounting to a support structure, you will also need these tools.

M0087-01 • 04/12/18 • © Hunter Fan Company

11/32” Wrench

9/64” Drill Bit

(optional)

Page 4

CEILING

Mounting Options

www.HunterFan.com

1.888.830.1326

OPTION

If you have a at ceiling:

WALL

Hang your fan by a standard downrod (included).

Standard Mounting

Support Structure

OPTION

If you have an angled ceiling:

1. You will need a longer downrod (sold separately).

2. If your ceiling angle is greater than 34°, you will also need an Angled Mounting Kit (sold separately).

Use the three steps below to determine if your ceiling angle is greater than 34°

Angled Mounting

Standard Mounting Style

Ceiling

Outlet Box

(required)

Angled Mounting Style

Ceiling

Outlet Box

(required)

FOLD

on dotted line

34°

Guide Touches

BOTH Ceiling & Wall

You need ONLY

a Longer

Downrod

*most common

2 3

PLACE

against wall

Guide Touches

but NOT Ceiling

You need BOTH

a Longer

Downrod &

an Angled

Mounting Kit

SLIDE

toward ceiling

Wall

M0087-01 • 04/12/18 • © Hunter Fan Company

M0087-01 • 02/09/16 • © Hunter Fan Company

Use Standard Mounting

or Low-Prole Mounting

to hang the fan from a at ceiling.

Use Angled Mounting

to hang the fan from a

vaulted or angled ceiling.

Page 5

Ceiling Bracket

www.HunterFan.com

1.888.830.1326

Turn Power

OFF

Remove all four mounting isolators.

To avoid possible electrical shock, before installing your fan, disconnect the power by turning off the circuit breakers to the outlet

box associated with the wall switch location.

Mounting Isolator

Ceiling Plate Screws

Tapered Mounting Holes

Align the tapered mounting holes in the ceiling plate with the holes in the ceiling

bracket. Install the four ceiling plate

screws found in the hardware bag and

secure with the ange nuts using an 11/32”

wrench. Hold the ceiling bracket assembly

up to the outlet box and mark the screw

locations. To mount to support structure,

also mark the ceiling for drilling pilot holes.

M0087-01 • 04/12/18 • © Hunter Fan Company

Ceiling Plate

Flange Nuts

Ceiling Bracket

Ceiling Plate Gasket

Ceiling Plate

Install the ceiling plate gasket onto the ceiling plate. The four holes in the ceiling plate should lineup with the four posts in

the gasket.

Refer to warning w.1 on pg. 2

Post

Page 6

Ceiling Bracket (continued)

Use the wood screw to poke holes through

the rubber gasket in order to install the

ceiling bracket assembly to your support

structure or ceiling fan-rated outlet box.

To avoid possible electrical shock, before installing your fan, disconnect the power by turning off the circuit breakers to the outlet

box associated with the wall switch location.

Use wood screws (included)

and washers when securing

to support structure with

approved electrical outlet

box. Drill 9/64” pilot holes in

support structure to aid in

securing ceiling bracket with

hardware found in

the hardware bag.

M0087-01 • 04/12/18 • © Hunter Fan Company

Use machine screws

(provided with outlet

box) and washers when

securing to existing ceiling

fan-rated outlet box. Make

sure it is securely installed

and is acceptable for fan

support of 31.8 kg (70 lbs)

or less.

www.HunterFan.com

For angled ceilings, point

opening toward peak.

If you are unable to do this,

call Technical Support at

1-888-830-1326.

Refer to warning w.1 on pg. 2

1.888.830.1326

Page 7

Ceiling Bracket (continued)

Preparation

Time Saver Tip: Get a helper

to insert grommets, found in

the hardware bag, into the

blades while you’re doing the

next couple of steps.

www.HunterFan.com

Remove the shipping blocks from the motor. Save the screws. They will be

needed for blade iron installation.

Note: Some fans will have a shipping

ring instead of shipping blocks. Please

remove the ring and save the screws.

1.888.830.1326

M0087-01 • 04/12/18 • © Hunter Fan Company

Page 8

Downrod

www.HunterFan.com

1.888.830.13261.888.830.1326

Standard Downrod

for ceilings 8-10’ high

Option 1Option 2

Shorter Downrod

for fans installed close to ceiling

Included

(pre-assembled)

Longer Downrod

for angled ceilings or

Option 3

ceilings 10’ or higher

skip to next page

If you need a different downrod length follow these steps:

Steps 1-5 to remove standard downrod pipe

1 2 3 4 5

Slide

678910

Included

Sold Separately

Steps 6-10 to reassemble with new pipe

M0087-01 • 04/12/18 • © Hunter Fan Company

Page 9

Downrod (continued)

www.HunterFan.com

1.888.830.1326

KEEP!

Remove the pre-installed

setscrew so that the downrod

can be inserted.

Hand tighten the downrod (at

least 4-5 full turns) until it stops.

8”

M0087-01 • 04/12/18 • © Hunter Fan Company

3/8”

8”

(not to scale)

The wires can be cut, but

leave at least 8” extending

from the top of the downrod.

Tighten the setscrew

with pliers. DO NOT

HAND TIGHTEN.

3/8”

If the setscrew is not tightened securely, the fan may fall.

Page 10

Downrod (continued)

DO NOT PICK THE FAN UP BY THE

Put the wires and downrod through the

canopy. Let the canopy sit loosely on top

www.HunterFan.com

1.888.830.1326

of the fan.

CANOPY OR WIRES. Place the downrod

ball into the slot in the ceiling bracket.

M0087-01 • 04/12/18 • © Hunter Fan Company

Page 11

Wiring

Using an orange wire

connect the 3 grounding

copper) coming from the

www.HunterFan.com

1.888.830.1326

Note: To connect the wires,

hold the bare metal leads together and place a wire

connector over them, then twist

clockwise until tight.

Refer to CAUTION c.1 on pg. 2

Green/Yellow Stripe

(grounding)

Black (ungrounded)

White (grounded) White

Using the orange

Green/Yellow Stripe

connector from

the hardware bag,

wires (green, green/

yellow stripe, or bare

Blue

Black

wire connectors from

the hardware bag,

connect the black wire (ungrounded) from the ceiling to the black and the blue wires from the

fan. Connect the white

wire (grounded) from

ceiling, downrod, and

hanging bracket.

Turn the splices upward and push them carefully back through the hanger bracket into the outlet box. Spread the wires apart, with the grounded wires on one side of

the outlet box and the ungrounded wires on the other side of the outlet box.

the ceiling to the white

wire from the fan.

Page 12

Canopy

Screw

Holes

www.HunterFan.com

1.888.830.1326

Position the canopy so that, when

lifted into place, the canopy ts into

the hanging bracket as shown.

Lift the canopy into place so that

the screw holes are aligned.

Install the two canopy

screws, found in

the hardware bag.

Note: Fan style may vary.

Page 13

Blades

Insert grommets found in the hardware

Lightly attach the blade irons to the

Remember the screws that

you kept after removing the

shipping blocks (page 6)? You

need them plus ve more from

the hardware bag for this step.

www.HunterFan.com

1.888.830.1326

bag into the holes in the blades, then secure each blade to a blade iron with screws found in the hardware bag.

motor with screws found in

the hardware bag, then securely

tighten after both screws are attached.

Page 14

Switch Housing

www.HunterFan.com

1.888.830.1326

Align the screw holes in the switch

housing gasket and the motor housing.

Screw two switch housing assembly screws from the hardware bag halfway into the motor housing. It does not matter

which two screw holes you choose.

Feed the wire plug through the center

hole of the upper switch housing, then

wrap keyhole slots around the screws and

twist counterclockwise.

Insert the third screw, found in

the hardware bag, into place and then

tighten all three screws.

Make sure the upper switch housing is securely attached to the mounting plate. Failure to properly secure all 3 assembly screws could result in the switch

housing xture falling.

Page 15

Switch Housing (continued)

Screw Holes

www.HunterFan.com

Turn Power

1.888.830.1326

Connect the plugs from

the upper and lower switch

housings. Make sure to line up

the colored markings on the

plug connectors.

Lift the lower switch housing

until the screw holes are aligned

with the screw holes in the

upper switch housing. Install

the three switch housing screws

found in the hardware bag.

Connect the fan pull chain

pendant to the short chain

coming from the switch housing.

Page 16

Switch Housing (continued) Maintenance & Cleaning

CONGRATULATIONS!

YOU’RE DONE!

The pull chain controls the fan:

from high to off.

Reverse

Switch

Changing the direction of air

ow - move the reverse switch

to the opposite position.

www.HunterFan.com

Cleaning the fan - use soft

brushes or cloths to prevent

scratching. Cleaning products

may damage the nishes.

1.888.830.1326

Page 17

Troubleshooting

www.HunterFan.com

1.888.830.1326

Fan doesn’t work

• Make sure power switch is on.

• Pull the pull chain to make sure it is on.

• Push the motor reversing switch

rmly left or right to ensure that

it is engaged.

• Check the circuit breaker to ensure the power is turned on.

• Make sure the blades spin freely.

• Turn off power from the circuit breaker, then loosen the canopy and check all the connections according to the wiring diagram on page 11.

• Check the plug connection in the switch housing.

Excessive wobbling

• Tighten all of the blade and blade iron screws until they are snug.

• Use the provided balancing kit and instructions to balance the fan.

Noisy Operation

• Tighten the blade and blade iron screws until they are snug.

• Check to see if any of the blades are cracked. If so, replace all of the blades.

Hunter Fan HTF2096 Owner Manual

Specifications and Main Features

Frequently Asked Questions

User Manual