Hunter Fan HTF10290 Owner Manual

Download

Page 1

Model: 55085 Matte Silver 55086 Matte Black Fan weight ±2 lbs: 24.4 lbs (11.1 kg)

Searow

Installation Manual

PG3783 r080719

Page 2

1886

Congratulations on purchasing your new Hunter® ceiling fan!

Here are the tools you’ll need to complete your installation:

The ceiling fan you purchased will provide comfort and performance in your home or ofce for many years. This instruction manual contains

WARNING

complete instructions for installing and operating your fan. We are proud of our work and appreciate the opportunity to supply you with the best ceiling fan available anywhere in the world.

We are here to help!

This Instruction Manual is designed to make installation as simple as possible. While working through this Instruction Manual, keep your smartphone or tablet nearby. We have added video links to help you through the more technical sections. If you are unfamiliar or uncomfortable with wiring, contact a qualied electrician. We also provide telephone support at 1.888.830.1326 or visit us at HunterFan.com.

READ and SAVE These Instructions

Warning

w.1 - To reduce the risk of re, electrical shock, or personal injury, mount fan directly from building structure and/or an outlet box marked acceptable for fan support of 70 lbs (31.8 kg) and use the mounting screws provided with the outlet box.

w.2 - To avoid possible electrical shock, before installing or servicing your fan, disconnect the power by turning off the circuit breakers to the outlet box and associated wall switch location. If you cannot lock the circuit breakers in the off position, securely fasten a prominent warning device, such as a tag, to the service panel.

w.3 – To reduce the risk of electric shock, this fan must be installed with an isolating wall control/switch. w.4 - To reduce the risk of personal injury, do not bend the blade brackets when installing the blade brackets, balancing the blades, or cleaning the fan. Do not insert foreign objects in between

rotating fan blades.

Caution

c.1 - All wiring must be in accordance with national and local electrical codes ANSI/NFPA 70. If you are unfamiliar with wiring, use a qualied electrician. c.2 - Use only Hunter replacement parts. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help. Caution: modications not approved by the party responsible for compliance could void user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any

interference received, including interference that may cause undesired operation.

Ladder

This product conforms to UL Standard 507.

OPTIONAL

If mounting to a support structure, you will also need these tools.

Screwdriver

9/64” Drill BitDrill

Pliers

Wire Strippers

Memphis TN 38016

Page 3

1886

We recommend that you pull everything out of the box and lay it out. We have

Here is what comes in your box:

grouped the drawn components below with the hardware you’ll need for those parts. The screws below are drawn to scale to make it easier to identify what piece of hardware is needed to install each component.

Hunter Pro Tip:

Do not discard the hardware bags or mix parts from different bags. Make note of the symbol printed on each hardware bag. The symbols can be used to identify the appropriate hardware for each step.

bag

Washer

For installing the hanger bracket and wiring the fan

x12

bag

Blade Screw

bag

Wire Nut

Blade Washer

Wood Screw

x12

Ceiling Gasket

Ceiling Plate

Ceiling Bracket

Canopy

Downrod

Adapter Cover

bag

For installing the canopy

Ceiling Plate Screw

Flange Nut

Blade

For installing the blades

Wall Control and Extra Downrod

bag

For your convenience, you may receive extra fasteners.

Spare Parts

Bulb

Glass Assembly

Note: Fan style may vary.

Motor

Upper Gasket

Upper Switch Housing

Lower Gasket

Light Kit

bag

Light Kit Screw

Short Light

Kit Screw

M3754-01 r080719

Find a part that is missing or damaged?

Don’t take it back to the store. Let us make it right. Visit us at HunterFan.com or call us at 1.888.830.1326.

Page 4

1886

Preparing the Ceiling Bracket

Installing the Ceiling Bracket

Choosing the Right Installation Location

Checking the Ceiling Angle:

Angled Mounting

You probably bought this fan with a location in mind. Let’s check below to make sure it is a good t.

Check the room dimensions: Check the outlet box:

30 inches

from blade tip to nearest wall or obstruction

7 feet

from bottom edge

of blade to the

oor

Standard Mounting

Support Structure

Outlet Box

(required)

Ceiling

You must be able to secure the fan to building structure or fan-rated outlet box.

Support Structure

Angled Mounting

Ceiling

Outlet Box

(required)

If you have a at ceiling:

Hang your fan by a standard downrod. Some fans come with a shorter downrod for a Low Prole installation.

A little more information on Angled Mounting:

For optimum performance and appearance, a longer downrod should be used with your Hunter ceiling fan when installing on high or angled ceiling. If your ceiling is angled greater than 34° you will also need an Angled Mounting Kit. Longer downrods and the Angled Mounting Kit are sold separately at HunterFan.com.

Hunter Pro Tip:

Determining if you need an Angled Mounting Kit:

Fold on the dotted line. Place against edge againts

WALL

the wall. Slide towards the ceiling. If the guide touches the wall but not the ceiling, you

need an angled mounting kit.

If you have an angled or vaulted ceiling:

1. You will need a longer downrod. (sold separately at HunterFan.com)

2. If your ceiling angle is greater than 34°, you will also need an Angled Mounting Kit. (Sold separately at HunterFan.com)

34°

CEILING

Page 5

1886

Preparing the Ceiling Bracket

Installing the Ceiling Bracket

Do this rst!

WARNING

STEP

Turn Power

OFF

To avoid possible electrical shock, before installing your fan, disconnect the power by turning off the circuit breakers to the outlet box associated with the wall switch location.

STEP

Align the tapered mounting holes in the ceiling plate

with the holes in the ceiling bracket. Install the four Remove all four mounting isolators.

ceiling plate screws found in the hardware bag and

secure with the ange nuts using an 11/32” wrench.

Hold the ceiling bracket assembly up to the outlet box

and mark the screw locations. To mount to support

structure, also mark the ceiling for drilling pilot holes.

bag

Canopy Plate Screw

Flange Nuts

STEP

Install the ceiling plate gasket onto the ceiling plate. The four holes in the ceiling plate should lineup with the four posts in the gasket.

You have two options for installation. Pick which one works best for your location. Remove any existing bracket prior to installation. Only use the provided Hunter ceiling bracket that came in your fan’s box.

Hunter Pro Tip:

The machine screws are the ones that came with your outlet box.

Option 1: Machine Screws

Use machine screws (provided with outlet box) when securing to existing ceiling fan-rated outlet box. Make sure it is securely installed and is acceptable for fan support of 31.8 kg (70 lbs) or less.

Option 2:

Wood Screws

Use wood screws (included) when securing to support structure with approved electrical outlet box. Drill 9/64” pilot holes in support structure to aid in securing ceiling bracket with hardware found in the hardware bag.

MOUNTING TIP

ANGLED

For angled ceilings, point opening toward peak.

Use the wood screw to poke holes through the rubber gasket in order to install the ceiling bracket assembly to your support structure or ceiling fan-rated outlet box.

Washer

bag

Wood Screw

Ceiling Bracket Downrod Hanging Fan Wiring Canopy Blades Light ControlGlass

Page 6

1886

Hanging the Fan

NOTICE

Follow below if you are using the downrod that came pre-assembled in your box. Need to

Installing the Downrod

WARNING

Wiring the Fan

install a longer or shorter downrod? Check out the guide at the end of this manual.

Hunter Pro Tip:

STEP

Slide the adapter cover onto the downrod until it rests against the hanger ball.

Hunter Pro Tip:

The adapter cover is not used for low-prole mounting.

STEP

Remove the pre-installed setscrew so that the downrod can be inserted.

STEP

Pass all wires to one side of horizontal bar in downrod assembly. Hand tighten the downrod (at least 4–5 full turns) until it stops. Trim the wires coming from the fan so that 8-inches remain coming from the top of the downrod.

The ground wire attached to the downrod is approximately 8 inches.

Tighten the setscrew with pliers. DO NOT

HAND TIGHTEN.

FAN FALL HAZARD

To prevent SERIOUS INJURY or DEATH:

• A LWAY S tighten setscrew with pliers.

• DO NOT hand tighten setscrew.

• CHECK the setscrew is tight using pliers

each time you change fan direction. Lower the adapter cover until it rests ush against the motor housing.

To prevent damage to fan, ALWAYS lift holding either the fan housing or the downrod.

Place the downrod ball into the slot in the ceiling bracket.

Ceiling Bracket Downrod Hanging Fan Wiring Canopy Blades Light ControlGlass

Page 7

1886

We know wiring is hard. Let’s make it easier.

Wiring the Fan

WARNING

Follow these steps to get your fan wired quickly and safely. Follow the route below that best matches your wall switch setup. If you are unfamiliar with wiring or uncomfortable doing it yourself, please contact a qualied electrician.

You are going to need these:

4 Wire Nuts (these are in the bag)

Have a single switch?

Follow these steps:

Connect the white (grounded) wire from the ceiling to the white wire from the fan.

Grounded

White

Connect the black (ungrounded) wire from the ceiling to the black wire from the fan.

Cap the blue wire from the fan.

for single switch wiring.

You will not need it

Black

Blue

Live

Hunter Pro Tip:

Here is how to connect the wires:

Push the bare metal ends of the wires together and slide a wire nut over them. Then, twist the wire nut clockwise until tight.

Give it a gentle pull to make sure none of the wires are loose.

Grounding

Green/Yellow Stripe

bag

Connect the three grounding wires (green,

green/yellow stripe, or bare copper) coming from the ceiling, downrod, and hanging bracket.

Wire Nut

The ceiling fan must be grounded. If the ground wire for the installation site is not present, immediately STOP installation and consult a qualied electrician.

Have dual switches?

Follow these steps:

Connect the white (grounded) wire from the ceiling to the white wire from the fan.

Connect the black (live) wire from the ceiling to the black wire from the fan.

Connect the second ungrounded (light) wire from the ceiling to the blue wire from the fan.

Grounded

White

Live

Black

Blue

Ungrounded (light)

All wiring must be in accordance with national and local electrical codes ANSI/NFPA

70. If you are unfamiliar with wiring or in doubt, consult a qualied electrician.

Grounding

Green/Yellow Stripe

bag

Wire Nut

Connect the three grounding wires (green, green/yellow stripe, or bare copper) coming from the ceiling, downrod, and hanging bracket.

Hunter Pro Tip:

Have extra wiring?

Turn the wires upward and push them carefully back through the hanger bracket into the outlet box. Make sure that the wires are still attached to the wire nuts.

Ceiling Bracket Downrod Hanging Fan Wiring Canopy Blades Light ControlGlass

Page 8

1886

Installing the Blades:

Installing the Canopy

Insert the two canopy screws

Assembling the Light

Installing the Glass

found in the hardware bag.

Canopy Screw

bag

t t

Lift the canopy into place so that the screw holes are aligned.

Put the blade washers found in the hardware bag onto the blade screws found in the hardware bag. Then install the blade screws to secure each blade to the fan.

Repeat x4

bag

x12

Blade Screw

x12

Blade Washer

Note:

Fan style may vary.

Ceiling Bracket Downrod Hanging Fan Wiring Canopy Blades Light ControlGlass

IMPORTANT

NOTE: Follow the instructions on the blade. Installing it incorrectly could result in your fan not functioning.

Page 9

1886

Assembling the Light

Installing the Glass

WARNING

bag

2 of 3

Light Kit Screw

bag

1 of 3

Light Kit Screw

Partially install two light kit screws, found in the hardware bag, through the upper switch housing gasket halfway into the motor housing as shown. It does not matter which two screw holes you choose.

bag bag

Partially install two light kit screws, found in the

hardware bag, through the light kit gasket halfway into the upper switch housing as shown. It does not matter which two screw holes you choose.

FAN FALL HAZARD

Make sure all screws are tight to secure the light xture.

Lift the upper switch housing and align the keyhole slots in the top of the upper switch housing with the partially installed light kit screws. Feed the wires through the center hole of the upper switch housing, then wrap keyhole slots around the screws and twist counterclockwise

2 of 3

Short Light Kit Screw

Connect the wires from the light kit to the wires from the fan. Connect the white wire to the white wire. Connect the blue wire to the black wire. Tuck the excess wiring above the light kit.

Align the keyhole slots in the top of the light kit with the partially installed light kit screws. Wrap the keyhole slots around the screws and twist counterclockwise

Install the third screw. Tighten all three screws securely.

1 of 3

Short Light Kit Screw

Install the third screw. Tighten all three screws securely.

Note:

Fan style may vary.

Tab

Notch

Install the included bulbs into the sockets. When necessary, replace with bulbs of same wattage.

Lift the glass assembly and align the notches in

Note:

Fan style may vary.

Ceiling Bracket Downrod Hanging Fan Wiring Canopy Blades Light ControlGlass

the glass assembly with the tabs in the light kit.

Attach the glass assembly by lifting and turning clockwise one third of a full turn of the glass until it stops.

NOTE: Check to ensure proper engagement.

GLASS FALL HAZARD

To prevent SERIOUS INJURY or DEATH, make sure that glass is properly secured.

Turn Power

Page 10

1886

Preparing the Wall Control

Turning off the power

Ensure the power is OFF at the outlet box and wall switch location before proceeding with installation.

KEY PRESS FUNCTION

LIGHT FUNCTIONS

Installing the battery

To access the battery compartment, slide the battery door up.

Replace the used battery with two AAA batteries when needed.

Wiring the Wall Control

Connect the grounding wire from the wall control to the ground control from the switch box using the provided wire nuts.

Connect the “LIVE IN” from the switch box to the “~VAC” from the wall control using the provided wire nuts.

Connect the “LIVE OUT” from the switch box to the “FAN” out from the wall control using the provided wire nuts.

Push all wires into the switch box.

Turn Power

Battery Door

OFF

Long Press Long Press

Long Press

Long Press Long Press

Long Press

FAN FUNCTIONS

Light On/Off

Light Dimming Control

Light High

Light Low

Dimming Mode On/Off

Fan On/Off

Fan Speed Control

Fan High

Fan Low

Reverse

Power On/Off

Pair Function

Installing the Wall Control

Install the longer screws through the slots in the wall control into the switch box screw holes.

Installing the Wall Plate

Install the shorter screws through the wall control plate and into the screw holes in the wall control.

Turning on the power

Turn Power

The remote transmitter is already paired to the

receiver and ready to use. If you need to pair your remote, cycle power to the fan by turning power off and back on at the wall switch (or circuit breaker if necessary). Within three minutes, do the following:

Reference the included remote function

card for information on how to use your wall control!

Ceiling Bracket Downrod Hanging Fan Wiring Canopy Blades Light ControlGlass

Page 11

1886

Troubleshooting

Fan Doesn’t Work

• Make sure power switch is on.

Excessive Wobbling

Noisy Operation

Limited Lifetime Warranty

• Check the circuit breaker to ensure the power is turned on.

• Make sure the blades spin freely.

• Turn off power from the circuit breaker, then loosen the canopy and check all the connections according to the wiring diagram.

• Make sure the blades are properly installed on the blade iron posts.

• Turn the power off, support the fan carefully, and check that the hanger ball is properly seated.

• Make sure the blades are properly installed.

• Check to see if any of the blades are cracked. If so, replace all of the blades.

Hunter Pro Tip:

Cleaning the Fan

Use soft brushes or cloths to prevent scratching. Cleaning products may damage the nishes.

Hunter Fan Company grants this limited warranty to the original purchaser of this Hunter ceiling fan. This document can be found at www.HunterFan.com. Thank you for choosing Hunter!

How Can Warranty Service Be Obtained?

Proof of purchase is required when requesting warranty service. The original

purchaser must present a sales receipt or other document that establishes proof of purchase. Hunter, at its sole discretion, may accept a gift receipt. To obtain service, contact Hunter Fan Company online or by phone.

www.HunterFan.com/Support/Contact-Us/

1-888-830-1326

Please do not ship your fan or any fan parts to Hunter. Delivery will be refused.

What Does This Warranty Cover?

Motor — Limited Lifetime Warranty

If any part of your ceiling fan motor fails during your ownership of the fan due to a defect in material or workmanship, as determined solely by Hunter, Hunter will provide you with a replacement fan free of charge.* The foregoing limited warranty applies only to the motor itself and does not apply to electronic controls – such as remote control transmitters, remote control receivers, or capacitors – used in conjunction with the motor. Such electronic control items are included in the one-year limited warranty below.

Other — One-Year Limited Warranty

Except as otherwise indicated throughout this warranty, if any part of your Hunter ceiling fan fails at any time within one year of the date of purchase due to a defect in material or workmanship, as determined solely by Hunter, Hunter will provide a replacement part free of charge.*

Light Kits — Warranty May Vary

Light kits are included in the one-year limited warranty. However, you may qualify for additional warranty coverage if your fan includes one of the following:

• LED Light Kits — Three-Year Limited Warranty If your LED light kit module (not including glass components) or LED bulb fails at any time within three years of the date of purchase due to a defect in material or workmanship, as determined solely by Hunter, Hunter will provide a replacement part free of charge.*

* If no replacement product/part can be provided for your fan, we will provide a comparable or superior replacement product/part at the sole discretion of Hunter.

What Does This Warranty NOT Cover?

Labor Excluded. This warranty does not cover any costs or fees associated with the labor (including electrician’s fees) required to install, remove, or replace a fan or any fan parts. There is no warranty for light bulbs (except where otherwise noted); remote control batteries; fans purchased or installed outside the United States; fans owned by someone other than the original purchaser; fans for which proof of purchase has not been established; fans purchased from an unauthorized dealer; ordinary wear and tear; minor cosmetic blemishes; refurbished fans; and fans that are damaged due to any of the following: improper installation, misuse, abuse, improper care, failure to follow Hunter instructions, accidental damage caused by the fan owner or related parties, modications to the fan, improper or incorrectly performed maintenance or repair, improper voltage supply or power surge, use of improper parts or accessories, failure to provide maintenance to the fan, or acts of God (e.g. ood). ORIGINAL PURCHASER’S SOLE AND EXCLUSIVE REMEDY FOR A CLAIM OF ANY KIND WITH RESPECT TO THIS PRODUCT SHALL BE THE REMEDIES SET FORTH HEREIN. HUNTER FAN COMPANY IS NOT RESPONSIBLE FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES, DUE TO PRODUCT FAILURE, WHETHER ARISING OUT OF BREACH OF WARRANTY, BREACH OF CONTRACT, OR OTHERWISE. Some States do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE APPLICABLE TO THIS PRODUCT ARE LIMITED IN DURATION TO THE PERIOD OF COVERAGE OF THE APPLICABLE LIMITED WARRANTIES SET FORTH ABOVE. Some States do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you.

How Does State Law Affect Warranty Coverage?

This warranty gives you specic legal rights. You may also have other rights which vary from state to state.

Page 12

1886

Downrod

If you need a different downrod length follow these steps:

WARNING

Follow steps 1-5 to remove standard downrod pipe

1 2 3 4 5

Follow steps 6-10 to reassemble with new downrod

678910

FAN FALL HAZARD

To prevent SERIOUS INJURY or DEATH:

• A LWAY S tighten setscrew with pliers.

• DO NOT hand tighten setscrew.

• CHECK the setscrew is tight using pliers

each time you change fan direction.