Hunter Fan HTF10008 Owner Manual

Download

Page 1

Model: 55079 Fresh White 55080 Matte Black Fan weight ±2 lbs: 24.5 lbs (11.1 kg)

Cedar Key

Installation Manual

PG3617 r061418

Page 2

1886

The ceiling fan you purchased will provide comfort and performance in your home or ofce for many years. This

Congratulations on purchasing your new Hunter® ceiling fan!

Here are the tools you’ll need to complete your installation:

1886

WARNING

instruction manual contains complete instructions for installing and operating your fan. We are proud of our work and appreciate the opportunity to supply you with the best ceiling fan available anywhere in the world.

We are here to help!

This Instruction Manual is designed to make installation as simple as possible. While working through this Instruction Manual, keep your smartphone or tablet nearby. We have added video links to help you through the more technical sections. If you are unfamiliar or uncomfortable with wiring, contact a qualied electrician. We also provide telephone support at 1.888.830.1326 or visit us at HunterFan.com.

READ and SAVE These Instructions

Warning

.1 - To reduce the risk of re, electrical shock, or personal injury, mount fan directly from building structure and/or an outlet box marked acceptable for fan support of 70 lbs (31.8 kg) and use the mounting screws provided with the outlet box.

w.2 - To avoid possible electrical shock, before installing or servicing your fan, disconnect the power by turning off the circuit breakers to the outlet box and associated wall switch location. If you cannot lock the circuit breakers in the off position, securely fasten a prominent warning device, such as a tag, to the service panel.

w.3 – To reduce the risk of electric shock, this fan must be installed with an isolating wall control/switch. w.4 - To reduce the risk of personal injury, do not bend the blade brackets when installing the blade brackets, balancing the blades, or cleaning the fan. Do not insert foreign objects in between

rotating fan blades.

Caution

c.1 - All wiring must be in accordance with national and local electrical codes ANSI/NFPA 70. If you are unfamiliar with wiring, use a qualied electrician. c.2 - Use only Hunter replacement parts. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help. Caution: modications not approved by the party responsible for compliance could void user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any

interference received, including interference that may cause undesired operation.

Ladder

Screwdriver

This product conforms to UL Standard 507.

Certied to CSA Standard C22.2 No. 113

OPTIONAL

If mounting to a support structure, you will also need these tools.

9/64” Drill BitDrill

Pliers

Wire Strippers

Page 3

1886

We recommend that you pull everything out of the box and lay it out. We have

Here is what comes in your box:

grouped the drawn components below with the hardware you’ll need for those parts. The screws below are drawn to scale to make it easier to identify what piece of hardware is needed to install each component.

Hunter Pro Tip:

Do not discard the hardware bags or mix parts from different bags. Make note of the symbol printed on each hardware bag. The symbols can be used to identify the appropriate hardware for each step.

bag

Washer

For installing the hanger bracket and wiring the fan

x15 x15

bag bag

Blade Nut

Wire Nut

Blade Screw

Wood Screw

Locking Screw

Ceiling Bracket

bag

For installing the housing

Motor

Upper Housing

Motor Housing Screw

Blade

For installing the blades

bag

For your convenience, you may receive extra fasteners.

Spare Parts

Blade Arm

Remote

bag

x10

Blade Arm Screw

Find a part that is missing or damaged?

Don’t take it back to the store. Let us make it right. Visit us at HunterFan.com or call us at 1.888.830.1326.

Light Fixture

Bulb

Glass

For installing the light kit

M3684-01 r061418

Page 4

1886

Choosing the Right Installation Location

You probably bought this fan with a location in mind. Let’s check below to make sure it is a good t.

Installing the Ceiling Bracket

Wiring the Fan

Hanging the Fan

Check the room dimensions: Check the outlet box:

30 inches

from blade tip to nearest wall or obstruction

7 feet

from bottom edge

of blade to the

oor

You have two options for installation. Pick which one works best for your location.

Do this rst!

Turn Power

OFF

You must be able to secure the fan to building structure or fan-rated outlet box.

Option 1: Machine Screws

Use machine screws (provided with outlet box) when securing to existing ceiling fan-rated outlet box. Make sure it is securely installed and is acceptable for fan support of 31.8 kg (70 lbs) or less.

Hunter Pro Tip:

The machine screws are the ones that came with your outlet box.

Option 2:

Wood Screws

Use wood screws (included) when securing to support structure with approved electrical outlet box. Drill 9/64” pilot holes in support structure to aid in securing ceiling bracket with hardware found in the hardware bag.

Washer

bag

Wood Screw

Ceiling Bracket Hanging Fan Wiring Canopy Blades Light Remote Remote Cradle Troubleshooting

Page 5

1886

Wiring the Fan

Hanging the Fan

STEP

While holding the wires out of the way, lift the motor assembly and place the square hanger into the opening in the ceiling bracket. Be sure the ground wire attached to the hanger faces out of the large opening in the ceiling bracket.

Once the motor is in the ceiling bracket, use the two locking screws found in the

hardware bag to secure the motor

to the ceiling bracket.

We know wiring is hard. Let’s make it easier.

Follow these steps to get your fan wired quickly and safely. Follow the route below that best matches your wall switch setup. If you are unfamiliar with wiring or uncomfortable doing it yourself, please contact a qualied electrician.

Have a single switch?

Follow these steps:

Ungrounded

Connect the three grounding wires (green, green/yellow stripe, or bare copper) coming from the ceiling and hanging bracket.

Grounding

Blue

bag

Hunter Pro Tip:

Here is how to connect the wires:

Push the bare metal ends of the wires together and slide a wire nut over them. Then, twist the wire nut clockwise until tight.

Give it a gentle pull to make sure none of the wires are loose.

Connect the white (grounded) wire from

Grounded

White

Black

Cap the blue wire from the fan. You will not need it for single switch wiring.

the ceiling to the white wire from the fan.

Connect the black (ungrounded) wire from the ceiling to the black wire from the fan.

bag

Locking Screw

Wire Nut

Hunter Pro Tip:

Have extra wiring?

Turn the wires upward and push them carefully back through

Have dual switches?

Follow these steps:

Connect the second ungrounded (light) wire from the ceiling to the blue wire from the fan.

Connect the three grounding wires (green, green/yellow stripe, or bare copper) coming from the ceiling and hanging bracket.

Ceiling Bracket Hanging Fan Wiring Canopy Blades Light Remote Remote Cradle Troubleshooting

Ungrounded (light)

Blue

Grounding

the hanger bracket into the outlet box. Make sure that the wires are still attached to the wire nuts.

Connect the white (grounded) wire from

Grounded

White

Ungrounded

the ceiling to the white wire from the fan.

Connect the black wire (ungrounded) from the ceiling to the black

Black

wire from the fan.

bag

Wire Nut

Page 6

1886

Installing the Blades:

Installing the Bulb and Glass

Assembling the Light

Installing the Motor Housing

STEP

Raise the motor housing up over the motor and ceiling bracket. Turn the motor housing so the screw holes align and the indentation in the housing locks into place with the notch in the ceiling bracket. The motor housing is

not secured until the next step is complete. Do not leave unattended.

Secure each blade to a blade iron as shown using the blade nuts, found in the hardware bag, and the blade assembly screws, found in the hardware bag.

Notch

Indentation

Repeat x5

STEP

With a Phillips head screwdriver, install the four motor housing screws found in

the hardware bag. Tighten all four screws securely.

bag

Motor Housing

Screw

Blade Screw

x15

Lightly attach the blade arms to the motor with the blade arm screws, then securely tighten after both screws are attached.

bag

Blade Nut

Blade Arm Screw

Repeat x5

x15

x10

Ceiling Bracket Hanging Fan Wiring Canopy Blades Light Remote Remote Cradle Troubleshooting

Page 7

1886

Installing the Bulb and Glass

Assembling the Light

Remove the cardboard plug guard before proceeding!

Notch

Push the connector and excess wire into the hole at the top of the light xture.

Connect the plugs from the fan and light xture. Make sure to line up the colored markings on the connectors.

Need a little more help with assembling this light?

Visit our light kit video at: http://bit.ly/HunterQuickConnect

The connector and excess wiring must be pushed into the light xture in order to successfully mount the light xture to the fan.

HOLD HERE

IMPORTANT

Raise the light kit to the bottom of the fan. Align the notch on the mounting ring on the top of the light kit with the pin in the mounting bracket on the bottom of the fan.

Some components not shown for visual clarity.

Give the xture a gentle, clockwise turn to ensure the xture is secure and that the locking pin has engaged.

Install the included LED bulb into the socket. When necessary, replace with bulb of same wattage.

Lift the glass and attach it to the light xture using the three thumbscrews. Tighten all three screws securely by hand.

Turn Power

Hunter Pro Tip:

Want to install your fan without a light kit?

Go to www.HunterFan.com/FAQs and click “How do I install my fan without the light kit?”

Ceiling Bracket Hanging Fan Wiring Canopy Blades Light Remote Remote Cradle Troubleshooting

Page 8

1886

Installing the Remote Control Cradle

Preparing the Remote

The remote control is already

NOTICE

paired for use.

Battery Door

Phillips Head Screw

To access the battery compartment, remove the small Phillips head screw that secures the battery door to the transmitter assembly. The battery should be installed with the positive (+) side up. Replace with a CR2032 battery when necessary.

• Always purchase the correct size and grade of battery most suitable for the intended use.

• Replace all batteries of a set at the same time.

• Clean the battery contacts and also those of the device prior to battery installation.

• Ensure the batteries are installed correctly with regard to polarity (+ and -).

• Remove batteries from equipment which is not to be used for an extended period of time.

• Remove used batteries promptly.

Turn Power

You have two options for installing the remote cradle.

Choose which path works best for you.

Option 1: Using Adhesive Strip

Press the cradle bracket against the wall and hold rmly for 30 seconds.

Remove the cradle from the cradle bracket.

Separate the lining from the back of the adhesive strip on the cradle bracket.

Option 2: Using Screws

Choose your cradle installation location.

If you are installing into drywall, drill two 9/64 width holes using the cradle bracket as a guide. Gently hammer the included drywall anchors into the pre-drilled holes.

Slide the cradle onto the mounted bracket.

Ceiling Bracket Hanging Fan Wiring Canopy Blades Light Remote Remote Cradle Troubleshooting

Page 9

1886

Troubleshooting

Limited Lifetime Warranty

Fan Doesn’t Work

• Make sure power switch is on.

Excessive Wobbling

Remote Control of Fan is Erratic

Remote Only Works Close to Fan

Noisy Operation

Multiple Remote Issues

• Push the motor reversing switch rmly left or right to ensure that it is engaged.

• Check the circuit breaker to ensure the power is turned on.

• Make sure the blades spin freely.

• Turn off power from the circuit breaker, then loosen the canopy and check all the connections according to the wiring diagram.

• Check the plug connection in the switch housing.

• Make sure the blades are properly installed on the blade iron posts.

• Turn the power off, support the fan carefully, and check that the hanger ball is properly seated.

• Use the provided balancing kit and instructions to balance the fan.

• Make sure the battery is installed correctly.

• Install a fresh battery.

• Change battery.

• Make sure the blades are properly installed.

• Check to see if any of the blades are cracked. If so, replace all of the blades.

• If you have multiple remotes or multiple remote-controlled fans installed on the same circuit breaker and you are experiencing interference or faulty operation of your remote controls, please go to www.HunterFan.com/FAQs and click “How do I properly install multiple

remote-controlled fans?” for information on how to correct this issue.

Hunter Pro Tip:

Cleaning the Fan

Use soft brushes or cloths to prevent scratching. Cleaning products may damage the nishes.

Hunter Fan Company grants this limited warranty to the original purchaser of this Hunter ceiling fan. This document can be found at www.HunterFan.com. Thank you for choosing Hunter!

How Can Warranty Service Be Obtained?

Proof of purchase is required when requesting warranty service. The original

purchaser must present a sales receipt or other document that establishes proof of purchase. Hunter, at its sole discretion, may accept a gift receipt. To obtain service, contact Hunter Fan Company online or by phone.

www.HunterFan.com/Support/Contact-Us/

1-888-830-1326

Please do not ship your fan or any fan parts to Hunter. Delivery will be refused.

What Does This Warranty Cover?

Motor — Limited Lifetime Warranty

If any part of your ceiling fan motor fails during your ownership of the fan due to a defect in material or workmanship, as determined solely by Hunter, Hunter will provide you with a replacement fan free of charge.* The foregoing limited warranty applies only to the motor itself and does not apply to electronic controls – such as remote control transmitters, remote control receivers, or capacitors – used in conjunction with the motor. Such electronic control items are included in the one-year limited warranty below.

Other — One-Year Limited Warranty

Except as otherwise indicated throughout this warranty, if any part of your Hunter ceiling fan fails at any time within one year of the date of purchase due to a defect in material or workmanship, as determined solely by Hunter, Hunter will provide a replacement part free of charge.*

Light Kits — Warranty May Vary

Light kits are included in the one-year limited warranty. However, you may qualify for additional warranty coverage if your fan includes one of the following:

• LED Light Kits — Three-Year Limited Warranty If your LED light kit module (not including glass components) or LED bulb fails at any time within three years of the date of purchase due to a defect in material or workmanship, as determined solely by Hunter, Hunter will provide a replacement part free of charge.*

* If no replacement product/part can be provided for your fan, we will provide a comparable or superior replacement product/part at the sole discretion of Hunter.

What Does This Warranty NOT Cover?

Labor Excluded. This warranty does not cover any costs or fees associated with the labor (including electrician’s fees) required to install, remove, or replace a fan or any fan parts. There is no warranty for light bulbs (except where otherwise noted); remote control batteries; fans purchased or installed outside the United States; fans owned by someone other than the original purchaser; fans for which proof of purchase has not been established; fans purchased from an unauthorized dealer; ordinary wear and tear; minor cosmetic blemishes; refurbished fans; and fans that are damaged due to any of the following: improper installation, misuse, abuse, improper care, failure to follow Hunter instructions, accidental damage caused by the fan owner or related parties, modications to the fan, improper or incorrectly performed maintenance or repair, improper voltage supply or power surge, use of improper parts or accessories, failure to provide maintenance to the fan, or acts of God (e.g. ood). ORIGINAL PURCHASER’S SOLE AND EXCLUSIVE REMEDY FOR A CLAIM OF ANY KIND WITH RESPECT TO THIS PRODUCT SHALL BE THE REMEDIES SET FORTH HEREIN. HUNTER FAN COMPANY IS NOT RESPONSIBLE FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES, DUE TO PRODUCT FAILURE, WHETHER ARISING OUT OF BREACH OF WARRANTY, BREACH OF CONTRACT, OR OTHERWISE. Some States do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE APPLICABLE TO THIS PRODUCT ARE LIMITED IN DURATION TO THE PERIOD OF COVERAGE OF THE APPLICABLE LIMITED WARRANTIES SET FORTH ABOVE. Some States do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you.

How Does State Law Affect Warranty Coverage?

This warranty gives you specic legal rights. You may also have other rights which vary from state to state.

Ceiling Bracket Hanging Fan Wiring Canopy Blades Light Remote Remote Cradle Troubleshooting