Hunter Fan 90245, 44806 User Manual

Owner’s Guide

fOr MOdel 90245

ENGLISH

See page 1

Vea la página 9

ESPAÑOL

Consulter la page 17

FRANÇAIS

HUNTERS HIGH VELOCITY FAN

44806 04/02/2008

IMPORTANT SAFETY INFORMATION

Read & Save ese Instructions

CAUTION

When using electrical appliances,
basic precautions should always be

taken to reduce the risk of re, electric

shock and personal injury:

1. Read all instructions before using
this fan.

2. Improper assembly may result in

the risk of re, electric shock or

personal injury.

3. The power plug must be removed
from the power socket when not

ENGLISH

in use, before cleaning, servicing,
maintenance and before moving
to another location.

4. Place the fan on a at, dry, stable

surface to avoid tipping over.

5. Use fan only for intended use,
as described in this instruction
manual.

6. NEVER insert ngers, pencils
or any other objects through
the grille.

7. DO NOT operate this fan:

• if the cord is damaged

• if the fan malfunctions

• if the fan has been dropped or

damaged in any way

8. To disconnect, grip plug and pull
from wall outlet. NEVER yank on
cord.

9. This product is intended for
garage, worshop, and indoor
residential use only.

10. DO NOT operate fan in the
presence of explosive and/or

ammable fumes.

11. DO NOT place fan or any parts

near an open ame, cooking or

any other heating appliances.

12. DO NOT use near curtains,
plants, window treatments, etc.

13. Never operate the fan if the
grills are not properly installed.
Operating the fan without the
grills could result in serious injury.

14. The appliance is not intended for

use by young children or inrm

persons without supervision.
Young children should be
supervised to ensure that they do
not play with the appliance.

15. This appliance has a grounded
three-prong plug and is suitable
for grounded receptacle use only.
An adapter is available (sold
separately at home improvement
or your local hardware store)
for connecting three-blade
grounding-type plugs to two-slot
receptacles. The adapter must
be properly grounded. DO NOT
attempt to defeat the purpose of
this safely feature.

44806 04/02/2008

[2]

WELCOME UNPACKING

Thank you for choosing a Hunter

Fan. This manual gives you complete

instructions for using your fan.

Before using your fan, record the following

information for your records and for

warranty assistance.

Model Name ______________________

Date Code ________________________

Date Purchased ____________________

Where Purchased __________________

_________________________________

As you unpack the fan, save the carton

and packing materials in case you want to

move or ship the unit in the future.

Carefully remove all items from

the box.

NOTE: It is best to have someone hold

the box while you lift the fan and the

protective packaging out of the carton.

Make sure all shipping materials are

removed from fan before operating.

ENGLISH

Please attach your

receipt or a copy of your

receipt to this manual for

future reference.

44806 04/02/2008

[3]

GROUNDING INSTRUCTIONS

This appliance is for household use only

and may be plugged into any 120-volt

AC electrical outlet (ordinary household

current). DO NOT use any other type of

outlet.

WARNING

This unit is suitable for
grounded receptacle use only.

The power cord has a grounded plug

as shown in Figure 1A. The fan must be

plugged into an electrical outlet that can

accommodate the grounding pin. If your

electrical outlet can not accommodate the

ENGLISH

grounding pin, then you must purchase

and install one of the two types of

adapters shown in Figure 1B.

Grounded
Plug

LINE CORD SAFETY TIPS

1. NEVER pull or yank on the cord or
the appliance.

2. To insert plug, grasp it rmly and

guide it into the outlet.

3. To disconnect the appliance, grasp
the plug and remove it from the
outlet.

4. Before each use, inspect the line
cord for cuts and/or abrasion marks.
If any are found, the appliance
should be serviced and the line
cord replaced. Please return it to
our Service Department or to an
authorized service representative.

5. NEVER wrap the cord tightly around
the appliance, as this could place
undue stress on the cord where
it enters the appliance and could
cause it to fray and break.

6. DO NOT operate appliance if the
line cord shows any damage, if the
appliance works intermittently or
stops working entirely.

Grounding
Pin

Grounded
Outlet

Figure 1A

Grounded
Outlet

Adapter
(Sold Separtely)

Grounding
Means

Figure 1B

44806 04/02/2008

[4]

ASSEMBLY

1. Remove the 2 Pre-Installed Bolts [a]
of the right end of the unit, with the
included Allen Wrench [b]. The allen
wrench is located inside the electrical

box cover (see gure 3 below).

2. Attach the Wheel Bracket Assembly
[a] using the Longer Bolts [b] provided
in the sack parts and tighten using the
allen wrench provided.

[a]

[b]

[a]

ENGLISH

[b]

[a]

3. Store the Allen Wrench [a] in the cover
of the electrical box. This wrench
can be used to adjust the tilt / swivel
resistance (see page 6).

[a]

44806 04/02/2008

[5]

OPERATION

ELECTRICAL BOX

• Grounded

• Circuit breaker protected with 7A

overcurrent protection [a].

NOTE: If the breaker trips, unplug all
cords and hit the reset button on the side
of the box.

[a]

TILT /SWIVEL RESISTANCE

ENGLISH

1. The cover of the electrical box holds

the allen wrench needed for this
operation (see page 5, step 3).

2. To adjust tilt resistance locate

fasteners on both sides of the fans [b].

• To increase tilt resistance - turn

clockwise.

• To decrease tilt resistance - turn

counter-clockwise.

3. To adjust swivel resistance locate

fasteners along the handle above
each fan [a].

• To increase swivel resistance - turn

clockwise.

• To decrease swivel resistance - turn

counter-clockwise.

FAN SPEED

1. Each fan can be independtly

operated.

2. Use speed control rotary knob to

control the fans 3 speeds: High,
Medium, and Low.

ADJUSTING

[a]

[b] [b][b]

44806 04/02/2008

[6]

®

STORAGE

1. ALWAYS store the fan in a dry place.

2. NEVER store the fan while it is still plugged in.

3. NEVER wrap the cord tightly around the fan.

4. DO NOT put any stress on the cord where it enters the fan, as it could cause the cord

to break.

MAINTENANCE

This fan is permanently lubricated and will not require additional lubrication (oil) for the life
of the fan.

This fan requires little maintenance and contains no user serviceable parts. DO NOT try to

x it yourself. Contact qualied service personnel if servicing is needed.

TO CLEAN:

1. Before cleaning, turn the fan off and remove the plug from electrical outlet. Wipe off

excess dust with a lint-free cloth.

2. DO NOT immerse the fan in water or any other liquid.

TROUBLESHOOTING

ENGLISH

PROBLEM

• Can not adjust the angle of the fan.

• Fan will not tilt

• Fan will not stay upright.

• Fan will not swivel.

• Fan will not hold horizontal position.

• Electrical box has no power.

2008 Hunter Fan Co.

©

44806 04/02/2008

SOLUTION

• Loosen the swivel and tilt bolts with

provided allen wrench

• Loosen tilt.

• Tighten tilt.

• Loosen swivel.

• Tighten swivel.

• Reset circuit breaker.

If you have tried these troubleshooting
solutions and still have trouble, visit our
Website at http://www.hunterfan.com

or call 888-830-1326 for Technical Assistance

from 7 AM to 7 PM Central Time Monday thru
Friday and 8 AM to 5 PM Central Time on
Saturday.

HUNTER FAN COMPANY
2500 FRISCO AVENUE
MEMPHIS, TN 38114, USA

[7]