Overture
Installation Manual
Model: 59646 |
Fresh White |
51221 |
Matte Nickel |
51427 |
Matte Black |
Fan weight ±0.9 kg (2 lb): 9.1 kg (20.0 lb)
©2020 Hunter Fan Co.
PG3905 r110520
Congratulations on purchasing your new Hunter® ceiling fan!
The ceiling fan you purchased will provide comfort and performance in your home or office for many years. This instruction manual contains complete instructions for installing and operating your fan. We are proud of our work and appreciate the opportunity to supply you with the best ceiling fan available
We are here to help!
This Instruction Manual is designed to make installation as simple as possible Manual, keep your smartphone or tablet nearby. We have added video links sections. If you are unfamiliar or uncomfortable with wiring, contact a qualified support at 1.888.830.1326.
Monday - Friday 8am - 6pm CST. Saturday 11am - 4pm CST (English or Español)
READ and SAVE These Instructions |
1886 |
WARNING |
Warning
w.1 - To reduce the risk of fire, electrical shock, or personal injury, mount fan directly from building structure and/or an outlet box marked acceptable for fan support of 31.8 kg (70 lb) and use the mounting screws provided with the outlet box.
w.2 - To avoid possible electrical shock, before installing or servicing your fan, disconnect the power by turning off the circuit breakers to the outlet box and associated wall switch location. If you cannot lock the circuit breakers in the off position, securely fasten a prominent warning device, such as a tag, to the service panel.
w.3 – To reduce the risk of electric shock, this fan must be installed with an isolating wall control/switch.
w.4 - To reduce the risk of personal injury, do not bend the blade brackets when installing the blade brackets, balancing the blades, or cleaning the fan. Do not insert foreign objects in between rotating fan blades.
w.5 - Non-rechargeable batteries are not to be recharged. Exhausted batteries are to be removed from the product.
Caution
c.1 - All wiring must be in accordance with national and local electrical codes ANSI/NFPA 70. If you are unfamiliar with wiring, use a qualified electrician. c.2 - Use only Hunter replacement parts.
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:
(1)This device may not cause interference.
(2)This device must accept any interference, including interference that may cause undesired operation of the device.
This product conforms to UL Standard 507.
Certified to CSA Standard C22.2 No. 113
Here are the tools you’ll need to complete your installation:
|
|
|
|
|
|
|
Ladder |
|
|
Screwdriver |
|||
|
||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Wire Strippers |
||
Pliers |
|
OPTIONAL |
|
|
|
|
If mounting to a support structure, you will also need these tools. |
||||
Drill |
9/64” Drill Bit |
5/32” Drill Bit |
Socket |
|
Wrench |
||||
|
|
|
© 2020 Hunter Fan Company
7130 Goodlett Farms Pkwy, Suite 400
Memphis TN 38016
1
1886
Here is what comes in your box:
We recommend that you pull everything out of the box and lay it out. We have grouped the drawn components below with the hardware you’ll need for those parts. The screws below are drawn to scale to make it easier to identify what piece of hardware is needed to install each component.
Hunter Pro Tip:
Do not discard the hardware bags or mix parts from different bags. Make note of the symbol printed on each hardware bag. The symbols can be used to identify the appropriate hardware for each step.
|
|
|
Wood Screw |
x2 |
Ceiling Bracket |
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
bag |
|
|
|
|
|
|
|
|
|
Washer |
Wire Nut |
|
|
|
|
|
|
x2 |
x4 |
|
|
|
Canopy Screw |
|
|
|
|
|
Canopy |
|
|
For installing the hanger bracket and wiring the fan |
|
|
bag |
x2 |
|||
|
|
|
|||||
|
|
|
|
||||
|
|
|
|
|
|
For installing the canopy |
|
|
|
|
|
|
Downrod |
|
|
|
|
|
|
|
|
bag |
Lag Bolt x1 |
|
|
|
|
|
|
|
|
|
|
x9 |
x9 |
|
|
|
|
bag |
Blade Washer |
bag |
Blade Screw |
|
|
WasherPlastic |
x1 Washer x1 |
|
|
|
|
|
|
||
|
|
|
|
|
|
For installing secondary |
|
|
|
|
|
|
Motor |
hanging system |
|
|
|
|
|
|
|
|
Upper Switch Housing
Blade x3
For installing the blades
Light Kit
bag |
Spare Parts |
Bulb |
|
For your convenience, |
|
|
|
|
x2 |
|
|
you may receive extra fasteners. |
|
||
|
|
||
|
Remote Control |
Remote Cradle |
|
|
Remote Components |
|
Light Kit Screw |
|
|
|
|
|
|
|
x3 |
|
|
bag |
Switch Housing |
|
|
Screw |
|
|
|
|
|
|
|
Glass |
|
|
|
For installing the light kit |
|
|
|
Find a part that is missing or damaged? |
|
|
|
Don’t take it back to the store. Let us make it right. Call us at 1.888.830.1326. |
|
M3817-01 r120420 |
2 |
|
|
|
|
1886
Choosing the Right Installation Location
You probably bought this fan with a location in mind. Let’s check below to make sure it is a good fit.
Check the room dimensions: |
Check the outlet box: |
30 inches |
|
from blade tip to |
|
nearest wall or |
|
obstruction |
7 feet |
|
|
|
from bottom edge |
|
of blade to the |
|
floor |
You must be able to secure the fan to building structure or fan-rated outlet box.
Checking the Ceiling Angle:
Standard Mounting
Support Structure
Ceiling
Outlet Box
(required)
If you have a flat ceiling:
Hang your fan by a standard downrod. Some fans come with a shorter downrod for a Low Profile installation.
|
Mounting |
Support |
|
Structure |
|
|
|
|
Angled |
|
|
|
|
Ceiling |
|
|
Outlet Box |
|
|
(required) |
If you have an angled or vaulted ceiling:
1. You will need a longer downrod.
2. If your ceiling angle is greater than 34°, you will also need an Angled Mounting Kit.
Angled Mounting
<![endif]>WALL
A little more information on Angled Mounting:
For optimum performance and appearance, a longer downrod should be used with your Hunter ceiling fan when installing on high or angled ceiling. If your ceiling is angled greater than 34° you will also need an Angled Mounting Kit.
Hunter Pro Tip:
Determining if you need an Angled Mounting Kit:
Fold on the dotted line. Place against edge againts the wall. Slide towards the ceiling.
If the guide touches the wall but not the ceiling, you need an angled mounting kit.
34°
CEILING
3