Hunter Fan 51023, 51014, 51022, 51024, 51061 User Manual

...

30 inches

7 feet

Ladder

Table of Contents

www.HunterFan.com

1.888.830.1326

Congratulations on purchasing your new Hunter® ceiling fan! It will provide comfort and performance

in your home or ofce for many

years. This installation and operation manual contains complete instructions for installing and operating your fan.

We are proud of our work and appreciate the opportunity to supply you with the best ceiling fan available anywhere in the world.

To register your fan please visit: www.HunterFan.com/register

Blades

What to Expect with

Your Installation

Tools Needed

PAG E

Preparation

PAG E

Downrod

Switch Housing Light Kit

Mounting Options

PAG E

Wiring

PAG E

Maintenance

& Cleaning

Ceiling Bracket

Installation

PAG E

Canopy

PAG E

Troubleshooting

PAG E

M0001-01 • 08/03/12 • © Hunter Fan Company

What to Expect with Your Installation

www.HunterFan.com

1.888.830.1326

1.888.830.13261.888.830.1326

Must be able to secure the fan to building structure or fan-rated outlet box

You may need a friend to help you.

Check box to see fan weight

If you are unfamiliar with wiring, use a

qualied electrician.

Know your wiring

Ceilings that are more than 34° will require an angled mounting kit. See page 3 for details.

Assess ceiling angle

30 inches

from blade tip to nearest wall or obstruction

Assess location

Standard Downrod

for ceilings 8-10 feet high

Shorter Downrod

for fans installed close to ceiling

Longer Downrod

for ceilings 10 feet or higher

Select a downrod length

7 feet

From bottom

edge of blade

to the oor

Read and Save These Instructions

This product conforms to UL Standard 507.

WARNINGS

w.1 - To reduce the risk of re, electrical shock, or

personal injury, mount fan directly from building structure and/or an outlet box marked acceptable for fan support of 70 lbs (31.8 kg) and use the mounting screws provided with the outlet box.

w.2 - To avoid possible electrical shock, before installing or servicing your fan, disconnect the power by turning off the circuit breakers to the outlet box and associated wall switch location. If you cannot lock the circuit breakers in the off position, securely fasten a prominent warning device, such as a tag, to the service panel.

w.3 - To reduce the risk of re, electrical shock, or motor damage, use only Hunter Solid State Speed Controls.

w.4 - To reduce the risk of personal injury, do not bend the blade brackets when installing the blade brackets, balancing the blades, or cleaning the fan. Do not insert foreign objects in between rotating fan blades.

CAUTIONS

c.1 - All wiring must be in accordance with national and local electrical codes ANSI/NFPA 70. If you are unfamiliar

with wiring, use a qualied electrician.

c.2 - Use only Hunter replacement parts.

M0001-01 • 08/03/12 • © Hunter Fan Company

Tools Needed

Mounting Options

CEILING

Ladder

Pliers

If mounting to a support structure, you will also need:

Wire Strippers

OPTION

FOLD

on dotted line

Flat

Angled

Use this guide to determine which mounting option is appropriate for your ceiling type.

skip to next page

1. You will need a Longer Downrod sold separately

2. You may need an Angle Mounting Kit

sold separately

Use the 3 steps below to determine if your ceiling angle is greater than 34°

2 3

PLACE

against wall

SLIDE

toward ceiling

WALL

Screwdrivers

Power Drill

(optional)

9/64” Drill Bit

(optional)

M0001-01 • 08/03/12 • © Hunter Fan Company

Guide Touches

BOTH Ceiling & Wall

You need ONLY

a Longer

Downrod

*most common

Guide Touches

but NOT Ceiling

You need BOTH

a Longer

Downrod &

an Angled

Mounting Kit

Wall

Mounting Options (continued)

Use Standard or Low-Prole Mounting

Use Angled Mounting to hang the

www.HunterFan.com

1.888.830.1326

Support Structure

Standard Mounting Style

to hang the fan from a at ceiling by a

standard downrod (included).

Ceiling

Outlet Box

(required)

Support Structure

Outlet Box

(required)

Angled Mounting Style

fan from a vaulted or angled ceiling

(see previous page).

Ceiling

Ceiling Bracket Installation

Turn Power

OFF

www.HunterFan.com

For angled ceilings, point

opening toward peak.

1.888.830.1326

Make sure all four (4) bumpers

are still attached.

To avoid possible electrical shock, before installing your fan, disconnect the power by turning off the circuit breakers to the outlet

box associated with the wall switch location.

Use wood screw (included) when securing to support structure with

approved electrical outlet box. Drill 9/64” pilot holes in support structure to aid in securing ceiling bracket

with hardware found in

the hardware bag.

Use machine screw

(provided with outlet

box) when securing to

existing ceiling fan-rated

outlet box. Make sure

it is securely installed

and is acceptable for fan

support of 31.8 kg (70 lbs)

or less.

If you are unable to do this,

call Technical Support at

1-888-830-1326.

Refer to warning w.1 on pg. 2

Ceiling Bracket Installation (continued)

Preparation

Remove the shipping blocks from

the motor. Save the ve screws.

They will be needed for blade iron

installation.

www.HunterFan.com

1.888.830.1326

Time Saver Tip: Get a helper

to insert grommets, found in

the hardware bag, into the

blades while you’re doing the

next couple of steps.

+ 11 hidden pages