Hunter Fan 44273, 44279 User Manual

5 MINUTE

INSTALLATION

Owner’s Manual

English

Models

44273 44279

5-1-1Programmable

Weekdays-Saturday-Sunday

Table Of Contents

At A Glance

Know Your ermostat � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 3

Setup

Setting Day and Time ��10

Scheduling

Scheduling Introduction � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 12 Personal Scheduling Charts � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 14 Setting Your Schedule � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 14 Temporary Temperature Change � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 18 Turning Oﬀ Scheduling � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 20 Save Away ��22

Features

Alerts ��24 Menu Options ��28 Additional Features ��32

ermostat Assistance

Troubleshooting and Support � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 33 Technical Support ��35

Warranty

1 Year Guarantee ��36

2

44129-01 • 07/23/2012

Know Your ermostat

Your thermostat has been pre-programmed from the factory with no programming necessary. We recommend using these pre-programmed settings for a few days before altering them as they offer maximum energy saving benets. If you do decide to alter your programs, use the charts on page 13 to write out your scheduled times and temperatures. After you have recorded your preferences, follow the instructions on page 14 to alter your temperature settings.

There is no need to program the thermostat at the wall where it is mounted! Remove the thermostat from the backplate by gripping the sides rmly and pulling it straight off. This allows you to program the thermostat in comfort.

After you have programmed your thermostat, no other setting changes are necessary unless you wish to browse through the menu to see how you may further adjust the independent settings of your thermostat to meet your lifestyle. The features section starting on page 28 of this manual will describe these settings. Most settings have been preset for optimal performance.

If you need any assistance with installion or setup of your new Hunter Thermostat, please call us, our technical support staff is ready to help!

USA: 1-888-830-1326

Canada: 1-866-268-1936

Hours of operation are from 7:00 am to 7:00 pm Monday - Friday and 8:00 am to 5:00 pm on Saturday, Central Time. You may also contact us over the Internet at:

www.HunterFan.com

3

Know Your ermostat

1. Allows Schedule Setup for altering scheduled programs.

2. Sets the Save Away feature for when you will not be home during a regularly programmed time.

3. Conrms completion of an action or returns you to the Home screen.

4. Allows access to the advanced features of the thermostat.

5. Moves you forward or backward while setting up features or schedules.

6. Adjusts time and temperature settings as well as moving up or down menu lists.

7. Indicates whether the system is set to Heat, Cool, or Off.

8. Shows if the fan is set to Auto or On modes.

9. Allows you to switch between Heat, Cool, and Off modes.

10. Allows you to switch between fan Auto and On mode.

4

44129-01 • 07/23/2012

Save Away

Schedule

Back

Done/ Home

Menu

1

2

5

7

9

43

6

5

8

10

5

Know Your ermostat

1. Holds 2 “AA” Batteries.

2. HE/HG Switch - allows you to set your furnace to Gas/Oil or Electric, based on the type of system you have.

3. Allows your thermostat to operate your HVAC system* properly by indicating the system type that you have.

*Conventional System: Uses a condensing unit for cooling and a separate furnace system for heating.

*Heat Pump System: Uses the condensing unit for both heating and cooling.

NOTE: If you are unsure of your system type it may be necessary to contact our technical support department at 1-888-830-1326, your HVAC manufacturer, or a local HVAC technician to determine this. Improper selection of your system type could cause the thermostat to not operate your system properly.

6

44129-01 • 07/23/2012

Know Your ermostat

1

2

3

7

Know Your ermostat

1. Shows the current day of the week or weekend.

2. Indicates the thermostat is running in schedule mode.

3. Will show when your heat pump or system is reporting a problem to the thermostat.

4. Indicates the current room temperature.

5. C will display when in Celsius mode. Nothing will display when set to Fahrenheit.

6. Flashes when the furnace lter should be checked for replacement.

7. On when the current schedule period is running.

8. Indicates the current active schedule period.

9. Low battery warning, replace the batteries in the thermostat.

10. Indicates the fan is running when displayed.

11. Shows the current mode of the fan, Auto or On.

12. Indicates the current time in AM (A) or PM (P).

13. On when the current operating mode, heat or cool, is running.

14. Current operating mode, heat or cool.

15. Indicates the thermostat is running in save away mode.

16. Current Set temperature the thermostat is scheduled to run.

8

44129-01 • 07/23/2012

2

7

At Home

12

10:05

P

15

Know Your ermostat

1

Wed

3

8

4

70

9

o

13

5

C

Filter

Auto

10

Heat to

16

72

6

11

14

o

9

Setting Day and Time

Once you install the batteries, the thermostat will prompt you to set the current day and time.

1. You will notice that “Mon” will be ashing at the top left of your screen. Use the or buttons to move to your current day of the week and press the

2. Use the or button to change between am(A) and pm(P). Choose

3. Next you will select your current hour by using the or buttons.

4. Set your minutes using the or and press

button advances you to the next step.

Done/ Home

to nish or

you need to make a correction to a previous step.

5. When nished, the thermostat will show “Updated!” to conrm your settings are saved.

6. Your thermostat will next prompt you to set your programming, see page 14 step 2 if you wish to alter your programs at this time.

10

44129-01 • 07/23/2012

Back

if

Setting Day and Time

Done/ Home

Menu

Save

Away

Schedule

Back Next

Done/ Home

Menu

Save

Away

Schedule

Back Next

1-4

Mon

A

12:00

Set

5

Updated!

11

Scheduling Introduction

Read the scheduling section thoroughly to ensure you understand your scheduling options and which will best t with your lifestyle. The following notes should help you with scheduling:

• The schedule time can be set in 15 minute increments, and remains the same

for both Heat and Cool programs.

• The scheduled temperature can be set in increments of 1°F (1°C).

• After 15 minutes without a key press, the thermostat will return to the home

display screen and save any changes you have made.

• When setting the schedule time, note the AM / PM indicator.

to move forward or backwards through the steps. changes, even if you have not scheduled or altered all settings.

• Arrows beside each schedule mode and beside heat/cool modes will indicate

which is active.

This thermostat has been pre-programmed to provide optimal energy savings. No programming is necessary. We recommend you run these programs for a few days before adjusting your programming. If it is necessary to change these settings, use the scheduling table on the next page to record your new settings. You will also nd the default schedule there as well.

Back

or

Done/ Home

will also save any

buttons

12

44129-01 • 07/23/2012