Hunter Fan 44132, 44134, 44133, 44127 User Manual

5 MINUTE
INSTALLATION
Owner’s Manual
English
Models
44127 44132 44133 44134
5-2 Programmable
Form# 44067-01 20120803 ©2012 Hunter Fan Co.
Table of Contents
At A Glance
Know Your ermostat � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �3
Setup
Setting Day and Time � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 10
Scheduling
Scheduling Introduction � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 12 Setting Your Schedule � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 14 Temporary Temperature Change � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 18 Turning Off Scheduling � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 20 Save Away ��������������������������������������������������������������22
Features
Alerts ������������������������������������������������������������������24 Menu Options ���������������������������������������������������������26 Additional Features ���������������������������������������������������� 30
ermostat Assistance
Troubleshooting and Support � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 31 Technical Support ������������������������������������������������������ 33
Warranty
1 Year Guarantee ������������������������������������������������������� 34
2
44067-01 • 08/03/2012
Know Your ermostat
Your thermostat has been pre-programmed from the factory with no programming necessary. We recommend using these pre-programmed settings for a few days before altering them as they offer maximum energy saving benets. If you do decide to alter your programs, use the charts on page 13 to write out your scheduled times and temperatures. After you have recorded your preferences, follow the instructions on page 14 to alter your temperature settings.
There is no need to program the thermostat at the wall where it is mounted! Remove the thermostat from the backplate by gripping the sides rmly and pulling it straight off. This allows you to program the thermostat in comfort.
After you have programmed your thermostat, no other setting changes are necessary unless you wish to browse through the menu to see how you may further adjust the independent settings of your thermostat to meet your lifestyle. The features section starting on page 26 of this manual will describe these settings. Most settings have been preset for optimal performance.
If you need any assistance with installation or setup of your new Hunter Thermostat, please call us, our technical support staff is ready to help!
USA: 1-888-830-1326
Canada: 1-866-268-1936
Hours of operation are from 7:00 am to 7:00 pm Monday - Friday and 8:00 am to 5:00 pm on Saturday, Central Time. You may also contact us over the Internet at:
www.HunterFan.com
©2012 Hunter Fan Company
3
Know Your ermostat
Your Hunter programable thermostat:
1. Enters Schedule Setup for altering scheduled programs.
2. Sets the Save Away feature for when you will not be home during a regularly programmed time.
3. Conrms completion of an action or returns you to the Home screen.
4. Allows access to the advanced features of the thermostat.
5. Moves you forward or backward while setting up features or schedules.
6. Adjusts time and temperature settings as well as moving up or down menu lists.
7. Indicates whether the system is set to Heat, Cool, or Off.
8. Shows if the fan is set to Auto or On modes.
9. Allows you to switch between Heat, Cool, and Off modes.
10. Allows you to switch between fan Auto and On modes.
4
44067-01 • 08/03/2012
Know Your ermostat
1
2
6
5
7
9
©2012 Hunter Fan Company
43
5
8
10
5
Know Your ermostat
1. Holds 2 “AA” Batteries.
2. HE/HG Switch - allows you to set your furnace to Gas/Oil or Electric, based on the type of system you have.
3. Allows your thermostat to operate your HVAC system* properly by indicating the system type that you have.
*Conventional System: Uses a condensing unit for cooling and a separate furnace system for heating.
*Heat Pump System: Uses the condensing unit for both heating and cooling.
NOTE: If you are unsure of your system type it may be necessary to contact our technical support department at 1-888-830-1326, your HVAC manufacturer, or a local HVAC technician to determine this. Improper selection of your system type could cause the thermostat to not operate your system properly.
6
44067-01 • 08/03/2012
Know Your ermostat
1
2
3
©2012 Hunter Fan Company
7
Know Your ermostat
1. Shows the current day of the week or weekend.
2. Indicates the thermostat is running in schedule mode.
3. Indicates the current room temperature.
4. C will display when in Celsius mode. Nothing will display when set to Fahrenheit.
5. Flashes when the furnace lter should be checked for replacement.
6. On when the current schedule period is running.
7. Indicates the current active schedule period.
8. Low battery warning, replace the batteries in the thermostat.
9. Indicates the fan is running when displayed.
10. Shows the current mode of the fan, Auto or On.
11. Indicates the current time in am(A) or pm (P).
12. On when the current operating mode, heat or cool, is running.
13. Current operating mode, heat or cool.
14. Indicates the thermostat is running in save away mode.
15. Current Set temperature the thermostat is scheduled to run.
8
44067-01 • 08/03/2012
2
6
At Home
11
10:05
P
14
Know Your ermostat
1
Wed
7
3
70
8
o
12
4
C
Filter
Auto
9
Heat to
15
72
5
10
13
o
©2012 Hunter Fan Company
9
Setting Day and Time
Once you install the batteries, the thermostat will prompt you to set the current day and time.
1. You will notice that “Mon” will be ashing at the top left of your screen. Use the press the
or buttons to move to your current day of the week and
Next
button to advance to the next step.
2. Use the
Next
3. Next you will select your current hour by using the
Next
4. Set your minutes using the
or button to change between am(A) and pm(P). Choose
to advance.
or buttons. The
button advances you to the next step.
Done/
or and press
Home
to nish or
Back
if you
need to make a correction to a previous step.
5. When nished, the thermostat will show “Updated!” to conrm your settings are saved.
6. Your thermostat will next prompt you to set your programming, see page 14 step 2 if you wish to alter your programs at this time.
10
44067-01 • 08/03/2012
Setting Day and Time
Done/ Home
Menu
Save
Away
Schedule
Back Next
Done/ Home
Menu
Save
Away
Schedule
Back Next
1-4
Mon
A
12:00
Set
©2012 Hunter Fan Company
5
Updated!
11
Loading...
+ 24 hidden pages