Hunter Fan 41370-01 User Manual
Hunter Outdoor Light Fixture
Installation Instructions
41370-01 7/28/2005
41370-01 rev 7-28-05.indd 7/28/2005, 11:38 AM1
CAUTIONS
• Read all installation instructions carefully before beginning installation and save these instructions.
• To reduce the risk of electrical shock and/or re, install this light xture only on Hunter
TM
type 5 fans
marked suitable for use in wet locations, when installed in a GFCI protected branch circuit. Note: e
fan type can be found on the ceiling fan package and on the name plate label located on top of the motor
housing of the ceiling fan.
WARNINGS
• To avoid possible electrical shock, before installing light xtures disconnect power by turning o the circuit breakers both to the outlet box and to its associated wall switch location. If you cannot lock the circuit breakers in the o position, securely fasten a prominent warning device, such as a tag, to the service
panel.
• Connect house wiring to the fan before attaching the light xture to the fan.
• All wiring must be in accordance with national and local electrical codes. If you are unfamiliar with wiring, you should use a qualied electrician. Professional installation is recommended.
41370-01 rev 7-28-05.indd 7/28/2005, 11:38 AM2
Loading...