Hunter Fan 35216 User Manual

Warm MistWarm MistWarm Mist

Humidier

Owner’s Guide

English

Form# 44059-01
20100511
©2010 Hunter Fan Co.

©2010 Hunter Fan Company

Model

35216

1

Table of Contents

At A Glance

Warnings and Know Your Humidier ................................................................. 3

Using Your Humidier

Initial Setup and Operation ................................................................................ 4

Maintenance

Cleaning and Storage ....................................................................................... 6

Humidier Assistance

Troubleshooting ................................................................................................ 8

Support ............................................................................................................ 9

Humidier Accessories

Treatments ...................................................................................................... 10

Warranty

3 Year Guarantee ........................................................................................... 11

1

At A Glance

Warnings and Know Your Humidifier

For the most effective and safe use of Hunter’s Warm Mist humidier,

please READ AND SAVE THESE INSTRUCTIONS!

Especially those regarding adding salt.

• ALWAYS place this warm mist humidier on a rm, level, and water resistant surface. ALWAYS place the warm mist

humidier at least six (6) inches away from walls and heat sources such as stoves, radiators, or heaters.

• ALWAYS place the warm mist humidier in an area that is out of the reach of children especially infants or toddlers.
Supervision is necessary when the warm mist unit is used near children, patients, or pets. Hunter realizes that many
customers use warm mists humidiers in their homes with small children. Please take the time to instruct children that the
warm mist unit is not a toy. Warm mist humidiers produce steam that could cause serious burns.

• Before using the warm mist humidier, extend the cord and inspect for any signs of damage. DO NOT use the product
if the cord has been damaged.

• This product has a polarized plug (one blade is wider than the other) as a safety feature. This plug will t into a polarized
outlet only one way. If the plug does not t fully into the outlet, reverse the plug. If it still does not t, contact a qualied
electrician. DO NOT attempt to defeat or override this safety feature.

• ALWAYS UNPLUG the warm mist unit when it is not in operation or while it is being emptied, lled, or cleaned.

• The warm mist humidier should always be placed at least four(4) feet from a bedside and out of reach of the patient or
children.

• Always ensure the warm mist humidier is sitting at on the surface it is placed and not resting on the cord or other
obstructions. Ensure the warm mist humidier cord is tucked away as to prevent the warm mist form being upset or turned
over.

• DO NOT add medication of any type into the water in the container. Do not cover the steam outlet or place anything
over it while the warm mist humidier is operating. Never drop or insert any object into any opening.

• Never ll the humidier tank with hot water. Always use clean, cool tap water.

Medicine Cup

Niteglo® Nitelight

button

Rell Tank Light

Steam Unit

Rell Tank

O

Power

Steam Exhaust

Speed Control

Power Light

Humidity Adjustment

©2010 Hunter Fan Company

Tank

3

Using Your Humidifier

Initial Setup and Operation

1. Remove the plastic bag covering from the warm mist humidier.

2. Unravel and straighten the cord before use.

2

3. Remove the steam unit from the tank. Hold the steam unit securely and press
the release button just above the power cord on the back of the steam unit and
pull straight up and off. Figure 1.

4. Fill the tank with clean, cool tap water until the water level is is about an inch
from the top of the tank. DO NOT OVERFILL.

5. Replace the steam unit in the tank and gently press down until the tabs on the
tank snap into place on the steam unit. Figure 2.

6. When using warm mist medications, ll the medicine cup on the steam unit as
directed by the medicine package.

NOTE: DO NOT add medication of any type into the water in the tank.

7. Plug the power cord into 110-120 Volts AC outlet protected up to 15 Amps.
The warm mist will produce a gentle ow of steam within a few minutes.

CAUTION: DO NOT use the warm mist with extension cords.

NOTE: Protect your oor and furniture by placing the warm mist unit on a non-

metallic, waterproof, heat-resistant surface.

8. If steaming does not start within ten minutes, unplug the steam unit and allow
to cool.

Rell Tank

O

Power

9. Remove the steam unit from the tank and add 2 to 3 pinches of ordinary
table salt to the water and mix thoroughly.

10. Reassemble the unit.

11. If steaming still does not start after another 10 minutes, add another pinch
or two of salt and mix thoroughly. Do not exceed 1/8 teaspon of salt, about
4-5 pinches, as excessive boiling or a blown fuse could occur.

Note: Remember the amount of salt you added to start the unit steaming. You
will need to add the same amount each time the unit is relled. Salt has no effect
on the purity of the steam or medication.

12. The warm mist will automatically stop producing steam when the water has
reached the minimum water level. The rell light will come on to indicate
the unit is out of water. Turn the unit off and rell according to the directions
above.

Caution: ALWAYS unplug the steam unit and allow to cool before removing
the tank. Never remove the steam unit before it has cooled as you could be
burned or shocked.

Release Button

Figure 1.

Tabs

4

44059-01 • 05/11/2010

Figure 2.