Hunter Fan 30832, 30882, 30883 User Manual
Auto Duster
Auto Duster
Auto Duster
Owner’s Manual
®
®
®
English
Form# 43095-01
20100615
©2010 Hunter Fan Co.
Models
30832
30882
30883
Table of Contents
Introduction .................................................... 2
Safety Instructions ......................................... 3
Using Your Auto Duster ................................. 3
How the Auto Duster System works .............. 4
Operating Your Auto Duster ........................... 4
Filter Replacement ........................................ 5
Cleaning ........................................................ 5
Troubleshooting ............................................. 6
Filter Ordering................................................ 6
Technical Support .......................................... 6
Warranty ........................................................ 6
INTRODUCTION
Thank you for purchasing the Auto Duster
dust removal system from Hunter Fan
Company. You have purchased our latest
development in portable home comfort. This
system has been developed to improve the
quality of the air you breathe.
The Auto Duster System air is pulled in
through the front right grill and cleaned
across the Auto Duster filter. Clean air is then
released out the front left grill in order to avoid
stirring up settled particles.
The following innovative features are included
in your Hunter Auto Duster.
• Dust Removal Efficiency: The Auto Duster
filter will remove up to 80% of airborne dust
particles in your homes air before it lands on
furniture.
SAFETY INSTRUCTIONS
Save These Important Instructions
1. The Auto Duster Unit is designed for use
on a flat, level surface and may not work
properly on an uneven surface. ALWAYS
place this Auto Duster on a firm, level
surface. ALWAYS place the Auto Duster at
least six (6) inches away from walls and
three (3) Ft. from heat sources such as
stoves, radiators, or heaters.
2. Place the Auto Duster in an area that is out
of the reach of children.
3. Before using the Auto Duster, extend the
cord and inspect for any signs of damage.
DO NOT use the product if the cord has
been damaged.
4. To reduce the risk of electric shock, this
product has a polarized plug (one blade is
wider than the other) as a safety feature.
This plug will fit into a polarized outlet only
one way. If the plug does not fit fully into
the outlet, reverse the plug. If it still does
not fit, contact a qualified electrician. DO
NOT attempt to defeat or override this
safety feature.
5. ALWAYS UNPLUG the Auto Duster when it
is not in operation, while the filter is being
changed, and while it is being cleaned.
6. DO NOT tilt or move the Auto Duster while
it is in operation. Shut off and unplug
before moving.
7. DO NOT immerse the Auto Duster in water
as permanent damage will occur. Refer to
and follow the CLEANING AND FILTER
REPLACEMENT instructions.
2©2010 Hunter Fan Co. 43095-01 20100615
USING YOUR AUTO DUSTER
1. Take the Auto Duster out of the box and
remove the clear plastic protective bag and
place the unit on a firm level surface.
2. Before turning on the Auto Duster, you
need to confirm that the filters are firmly in
place and have not become loose during
shipping. To check the filters, open the front
grill by grabbing the tabs on each side of
the unit and unlatch them.
3. The Auto Duster
the unit. If present, remove the plastic bag
surrounding the filter and place the filter
back into the Auto Duster. The filter should
be placed in the unit with the white side out
as shown in Figure 1.
4. Place the bottom of the grill back into the
indention in the base and push the door
back until the tabs on each side snap into
place.
6. Plug the unit into a 120V electrical outlet.
To turn the unit on and choose the appropriate
speed use the rotary switch on the top of the
unit.
®
filter will be resting inside
HOW THE AUTO DUSTER SYSTEM
WORKS
Dust and other large particles are pulled into
the Auto Duster Grill by the fan. The plastic
screen on the filter attracts larger particles
like, pet dander and hair, and traps them.
Smaller particles such as dust are trapped
within the filter. Dust-free air is then released
into the room through the top grill. Figure 1.
FILTER REPLACEMENT
To replace the Auto Duster filter:
1. turn the unit off and unplug from the wall.
2. Snap the front grill off by putting your
fingers behind the tabs located on either
side of the unit and pull forward. Figure 2.
3. Remove the filter from the unit and discard.
4. Seat the new filter into the unit ensure the
white side is facing towards you.
5. Place the bottom of the grill into the
indention in the bottom of the unit and
press the grill back into place. The tabs on
either side of the unit will snap into place.
Figure 1.
6. Plug the unit back into your wall outlet.
Figure 2.
3©2010 Hunter Fan Co. 43095-01 20100615
Loading...