Thank you for purchasing the Total Air Purification System
from Hunter Fan Company. You have purchased our
latest development in Portable Air Purification Systems.
This system has been developed to improve the quality of
the air you breathe.
Our Permanent HEPA Air Purification System out
performs other air purification systems by quickly and
effectively removing dust, smoke, and pollen particles as
small as 0.3 microns in size. The following innovative
features are included in your Hunter Air Purifier.
3 High Particulate Efficiency: The permanent
HEPA filter will remove up to 99.9% of particles as
small as 0.3 micron particles from the air that passes
through the filter.
3 Washable Pre-Filter: The washable pre-filter is
permanent and can be cleaned and reused.
3 UVC Lamp: This Hunter Air Purifier is equipped
with a UVC germicidal lamp. UVC technology is a
proven germicide that is accepted by the FDA and
EPA as having the ability to kill pathogens in air that
are exposed to UVC light.
3 Photocatalitic Oxidation: Reduces the amount
of toxic VOCs in the air caused by household cleaners
and products.
3 Oxygenating Catalyst: Converts ozone and
smog into oxygen for cleaner air and peace of mind.
3 Remote Operation: Convenient remote allows
operation of UVC and speed settings.
SAFETY INSTRUCTIONS
IMPORTANT!
READ ALL INSTRUCTIONS BEFORE USING THIS AIR
PURIFIER.
1. WARNING: This Air Purifier emits UVC radiation that
may cause eye and/or skin irritation. RG-3. Avoid
exposing eyes and skin to unshielded UVC Lamp.
2. CAUTION: The UVC Lamp may shatter and cause
injury if it is dropped or sustains impact. Wear safety
glasses and gloves when handling the UVC Lamp.
Do not use excessive force when handling the UVC
Lamp. Dispose of the UVC bulb in accordance with
local or State guidelines as trace amounts of Mercury
are present.
3. This Air Purifier is designed for use on a level floor and
may not work properly on an uneven floor. ALWAYS
place the Air Purifier on a firm, level floor. ALWAYS
place the Air Purifier at least six (6) inches away from
walls and heat sources such as stoves, radiators, or
heaters.
4. Place the Air Purifier in an area that is out of the reach
of children.
5. Before using the Air Purifier, extend the cord and
inspect for any signs of damage. DO NOT use the
product if the cord has been damaged.
6. To reduce the risk of electric shock, this product has
a polarized plug (one blade is wider than the other)
as a safety feature. This plug will fit into a polarized
outlet only one way. If the plug does not fit fully into
the outlet, reverse the plug. If it still does not fit, contact
a qualified electrician. DO NOT attempt to defeat or
override this safety feature.
7. ALWAYS UNPLUG the Air Purifier while it is being
cleaned.
8. DO NOT move or tilt the Air Purifier while it is in
operation. Turn off and unplug before moving.
9. DO NOT immerse the Air Purifier in water at any time
because permanent damage will occur. To properly
clean your Air Purifier, follow the instructions in the
Maintenance section of this manual “Air Purifier
Maintenance” on page 7.
10. This equipment should be inspected frequently and
collected dirt removed from it regularly to prevent
excessive accumulation that could result in flashover
or risk of fire.
1. Take the Air Purifier out of the box and remove the
clear plastic protective bag and place the unit on a
firm, level surface.
2. Before turning on the Air Purifier, you need to confirm
that the filters are firmly in place and have not become
loose during shipping. To check the filters, push down
on the tab under the handle. Figure 1.
Tab
3. Gently pull the rear grill away from the unit and lift
away. Figure 2.
4. The washable Pre-Filter is mounted inside the back
grill of the unit. Confirm that it properly covers the
grill vents.
5. The Permanent HEPA Filter will be resting inside the
unit. If present, remove the plastic bag surrounding
the filter and place the filter back into the Air Purifier.
The filter should have arrows on the side to indicate
air flow and the direction the filter should be placed
back into the unit. Figure 3.
6. Set the tab on the bottom of the rear grill into the slot
in the base of the unit and rock the grill up until the
top tab snaps into place. Figure 4.