Hunter Fan 30031, 30034, 30033, 30030 User Manual
Personal Space Air CleanerPersonal Space Air CleanerPersonal Space Air Cleaner
SO
30030, 30031,
L
Owner’s Guide
MODELS
30033, 30034
O
2
English
Form# 43057-01
20100609
©2010 Hunter Fan Co.
©2008 Hunter Fan Co. 43051-01 06/06/2008
Table of Contents
Safety Instructions .................................................................2
Introduction ............................................................................2
Air Filtration System ..............................................................3
Solo
Operation ...............................................................................4
Adjusting the Solo
Air Cleaner Maintenance .......................................................4
Technical Support ..................................................................5
Troubleshooting .....................................................................6
Filter Ordering........................................................................6
Warranty ................................................................................6
Other Home Comfort Products From Hunter .........................7
How the HEPAtech® System Works 3
2
Components .................................................................3
Touch Sensitive 4
Areas 4
2 ................................................................................................................ 4
Cleaning 4
Changing the Filter 5
4. DO NOT immerse the SOLO
because permanent damage will occur. To properly clean
your SOLO2, follow the instructions in the Maintenance
section of this manual (page. 4).
5. This equipment should be inspected frequently and
collected dirt removed from it regularly to prevent
excessive accumulation that could result in flashover or
risk of fire.
in water at any time
2
INTRODUCTION
Thank you for purchasing the SOLO2 Personal Space Air
Cleaner from Hunter Fan Company. You have purchased our
latest development in portable air cleaning which has been
designed to improve the quality of the air that you breathe.
The following innovative features are included in your Hunter
Air Cleaner.
• Touch Sensitive Controls: Your SOLO2 Air Cleaner
utilizes a touch control interface for operation. The touch
sensitive pads on the front of the unit only need to be
touched with your finger tips to activate. Finger nails,
pens, or pencils will not activate the fields for the touch
control.
SAFETY INSTRUCTIONS
IMPORTANT!
READ ALL INSTRUCTIONS
BEFORE USING THIS AIR CLEANER!
1. This Air Cleaner is designed for use on a flat level surface
and may not work properly otherwise. ALWAYS place the
SOLO2 on a firm level surface. ALWAYS ensure the
SOLO2 is at least six (6) inches away from walls or
computers, and 3 ft. heat sources such as stoves,
radiators, or heaters.
2. Before using the SOLO2, extend the cord and inspect for
any signs of damage. DO NOT use the product if the cord
has been damaged.
3. ALWAYS UNPLUG the SOLO
while it is being cleaned.
©2010 Hunter Fan Co. 43057-01 20100609
from your power source
2
• Switchable Power Supply: Your SOLO2 power
adapter meets with all State and Local guidelines for
power consumption. With your power adapter being
“Switchable”, your SOLO2 can be taken anywhere, even
overseas.
• High Particulate Efficiency: The HEPAtech® filter will
remove micron particles from the air that pass through
the filter. The back side of the HEPAtech® filter includes a
carbon filter which will also help illiminate odors.
• Filter Counters: Filter maintenance is critical to the
performance of the SOLO2. To help you determine when
to change the HEPAtech® filter, the unit has a built in
life counter to keep track of the life remaining on the
filter.
2
AIR FILTRATION SYSTEM
How the HEPAtech® System Works
Air is pulled in through the bottom of the unit where particles
such as dust, dander, and pollen collect on the HEPAtech
filter, leaving the air emitted from the front of the SOLO2
cleaner and healthier for your personal space. Figure 1.
The carbon pre-filter on the back of the filter also helps to
eliminate odors from the air. The fan within the unit ensures
that air is pulled into the unit and forced through the filter to
provide fresh air wherever SOLO2 is setup. Refer to Figure
2. for parts breakdown.
®
SOLO2 COMPONENTS
FILTER CHECK
(AMBER LED)
TOUCH INDICATOR
(BLUE LED)
FILTER RESET
TOUCH
CONTROLS
Figure 1.
AC
ADAPTER
PLUG
FILTER
FILTER
CARBON PRE-FILTER
12VDC
500mA
HINGES
EXHAUST
VENT
WIRE FRAME
WIRE BASE
WIRE STABILIZERS
©2010 Hunter Fan Co. 43057-01 20100609
3
Figure 2.
Loading...