Hunter Fan 28120 User Manual
Tribeca
TM
Installation Instructions
41765-01 06/22/2005
CAUTIONS
• Read entire installation instructions carefully before beginning installation and save these instructions.
• To avoid possible risk of electrical shock and re, install this light xture only on Hunter TribecaTM fans, models 28120, 28121 and 28122.
Note: To nd the fan model number, check the ceiling fan package or
on the nameplate label located on top of the motor housing of the
ceiling fan.
WARNINGS
• To avoid possible electrical shock, before installing light xtures disconnect power by turning o the circuit breakers both to the outlet
box and to its associated wall switch location. If you cannot lock the
circuit breakers in the o position, securely fasten a prominent warning device, such as a tag, to the service panel.
• Connect house wiring to the fan before attaching the light xture to
the fan.
• All wiring must be in accordance with national and local electrical
codes. If you are unfamiliar with wiring, you should use a qualied
electrician. Professional installation is recommended.
• To reduce the risk of re or personal injury, allow bulbs and surrounding surfaces to cool to room temperature before touching or removing them.
Troubleshooting
Light does not come on.
1. Push the light button on the remote transmitter. Verify remote operation.
Refer to fan manual for remote operation and troubleshooting.
2. Make sure bulbs are installed properly and lament is not blown.
3. Make sure breakers or fuses are on.
4. Verify that the light power lead is connected at the ceiling. Refer to your
ceiling fan manual for locating assembly and wiring.
Glass rattles.
1. Make sure the glass globe is secure.
For other problems or ques-
tions, contact the Hunter Fan
Company Technical Support
at
1-888-830-1326 or
techsupport@hunterfan.com.
http://www.hunterfan.com
is light xture is for use
only on Hunter TribecaTM
Ceiling Fans, models 28120,
28121, and 28122.
Loading...