HunterDouglas Pirouette Installation & Operation Manual
UltraGlide
®
EasyRise
™
Installation • Operation • Care
Pirouette® Window Shadings
EasyRise and UltraGlide Lifting Systems
and Two-On-One Headrail Shadings
CONTENTS
Getting Started:
Product View ............................................................................................1
Tools and Fasteners Needed ...................................................................... 2
Installation:
Installation Overview ................................................................................. 3
Mount the Installation Brackets — Inside Mount ......................................... 4
Mount the Installation Brackets — Outside Mount ......................................6
Mount the Installation Brackets — EndMount ............................................ 8
Install the Shading ....................................................................................9
Attach the Dust Cover (Optional for Outside Mounts and End Mounts) ..........9
Attach the Universal Cord Tensioner (UCT) — EasyRise
™
Only ...................10
Final Adjustments....................................................................................11
Operation:
Operate the Shading ..............................................................................13
Troubleshooting ......................................................................................15
Care:
Removing the Shading.............................................................................18
Cleaning Procedures ............................................................................... 18
Child Safety:
Warning .................................................................................................20
Questions?
Call the Hunter Douglas Customer Information Center at
1-888-501-8364.
© 2016 Hunter Douglas. All rights reserved. All trademarks used herein are the property of Hunter Douglas
or their respective owners.
GETTING STARTED
1
Product View
Installation
Brackets
Fabric-covered
Headrail
Cord Tensioner
and Bracket
Dust Cover
(Optional)
Tassel
Bottom Rail
Magnetic
Hold-Down
Brackets
(Optional)
Pirouette
®
with EasyRise
™
Pirouette with UltraGlid
e
®
Not Shown: Two-On-One Headrail shadings
2
GETTING STARTED
Thank you for purchasing Hunter Douglas Pirouette® window shadings. With proper installation,
operation, and care, your new shadings will provide years of beauty andperformance.
Please thoroughly review this instruction booklet and the enclosed packing list before beginning
the installation. Leave the protective cover on the fabric-covered headrail until you are satisfied
with the installation and operation of your shading.
Tools and Fasteners Needed
■ Flat blade and Phillips screwdrivers ■ Level (laser level is recommended)
■ Measuring tape and pencil ■ Pliers
■ Power drill,
3
/32" drill bit,
and
1
/4" hex driver
■ Scissors (heavy-duty)
In addition, you will need fasteners designed to work with your specific mounting surface(s).
■ #6 Hex Head Screws (Provided). Two 1
1
/2" screws are provided per installation bracket.
■ Longer #6 Hex Head Screws (Not Provided). If using spacer blocks, use #6 screws long
enough for a secure attachment.
■ Speed Nuts and Screws (Provided). Extension brackets come with screws and speed nuts.
■ Drywall Anchors (Not Provided). Use drywall anchors when mounting into drywall.
Speed Nut
and Screw
(Provided with Each
Extension Bracket)
#6 x 1
1
/2"
Hex Head Screw
(Provided)
Longer #6 Hex Head Screw
for Use with Spacer Blocks
(Not Provided)
INSTALLATION
3
Installation Overview
■ Your order will include the correct number of installation brackets for your shading width, as
shown in the table below.
■ Shading orders may also include spacer blocks or extension brackets, if they were specified
for added clearance.
➤ Extension brackets are used for end mount shadings, as well.
Mounting Types and Window Terminology
If the installation brackets are mounted correctly, the rest of the installation process follows
easily. To prepare for this important first step, review the mounting types and basic window
terminology illustrated below.
■ Refer to the appropriate page below based on your order:
➤ Inside Mount — Page 4
➤ Outside Mount — Page 6
➤ End Mount — Page 8
Installation Bracket For Added Clearance
Shading Width Brackets
2
3
4
5
Extension
Bracket
1
/2" Spacer
Block
12" – 30"
301/8" – 60"
601/8" – 90"
901/8" – 120"
Inside Mount
Shading fits within
window opening.
Molding
Head Jamb
Sill
Jamb Jamb
Outside Mount
Shading mounts outside
window opening.
Collectively, the sill and
jambs are called the
“window casement.”
INSTALLATION
4
Mount the Installation Brackets — Inside Mount
Prepare the Installation Brackets
■ If using the optional back cover: Use pliers or heavy
duty scissors to remove both the top and bottom tabs on
the installation brackets.
➤ Then remove the top tab on the back cover brackets.
➤ Snap the prongs on the back cover brackets into the
holes on the back of the installation brackets.
■ If not using the optional back cover: Remove the top
tab only on the installation brackets.
NOTE: Save these tabs once removed. They may be used as
shims, if necessary.
Mount the Installation Brackets
■ Mark 2" to 3" from each jamb for bracket location.
➤ If more than two installation brackets came with your order, space additional bracket(s)
evenly between the two end brackets and mark their location. Mount into wood
whenever possible.
■ Two-On-One Headrail Shadings. Place installation brackets 3" on each side of the panel
split, as shown below.
Top
Tab
Bottom
Tab
Remove Top Tab
Back Cover Bracket
Jamb
Jamb
Space Evenly
Space Evenly
2" to 3"
2" to 3"
Jamb
Jamb
Space Evenly
Space Evenly
2" to 3"
2" to 3"
Panel Split
3" 3"
INSTALLATION
5
■ Decide whether the front or back set of installation bracket holes works best in your
application. (The front set is the preferred location.) Mark the location of the screwholes.
➤ The minimum depth required for mounting is 1".
➤ The fully recessed mounting depth is 3
3
/
4
"
.
➤ If using the optional back cover, an additional
1
/
4
"
mounting depth is required.
IMPORTANT: The front edges of the installation brackets
must be level and aligned to eachother.
WARNING: Failure to properly align the brackets
could result in the headrail releasing from the
brackets.
■ Use a level to check that the mounting surface is level. Shim the brackets, if necessary.
■ Drill the screw holes using a
3
/32" drill bit.
CAUTION: Use drywall anchors when mounting into drywall.
■ Attach the installation brackets using the screws provided.
IMPORTANT: Do not overtighten the screws. Check to ensure
the lever can be moved easily side to side. If not, loosen the
screws
in one-eighth turn increments until the lever can be
moved easily.
■ If using the optional back cover: Install the cover into
the back cover brackets. If necessary, trim the back cover
to the desired width.
Proceed to “Install the Shading” on page 9.
2" to 3"
Casement
Depth
Back
Cover
INSTALLATION
6
Mount the Installation Brackets — Outside Mount
■ Use pliers or heavy duty scissors to remove both the top and
bottom tabs on the installation brackets.
NOTE: Save these tabs once removed. They may be used
as shims, if necessary.
■ Center the headrail over the window opening at the desired height. Use a pencil to lightly
mark each end of the headrail.
➤ Alternatively, measure the width of the headrail and use that width to mark the headrail
end points over the window opening.
■ Mark 2" to 3" from each end of theheadrail.
➤ If more than two installation brackets came with your order, space additional bracket(s)
evenly between the two end brackets and mark their location. Mount into wood
whenever possible.
■ Two-On-One Headrail Shadings. Place installation brackets 3" on each side of the panel
split, as shown below.
Top
Tab
Bottom
Tab
Window Opening
Space Evenly
Space Evenly
2" to 3" 2" to 3"
Headrail End Mark Headrail End Mark
Window Opening
Space Evenly
Panel Split
Space Evenly
2" to 3"
3"
3"
2" to 3"
Headrail End Mark Headrail End Mark
Loading...