HunterDouglas Auto Stop Installation Instructions Manual
1
2
1
2
Auto Stop Adjustment
Loosen relevant stopper screws with an Allen key.
Lengthen left back and right operated front roll
shades by slightly turning and moving the inner
stopper towards the clutch (1). Shorten the shade
by turning and moving the inner stopper away from
the clutch (2).
Remove the roller shade. Take out the clutch.
Auto Stop Bottom Adjustment
Remove the roller shade. Take out the clutch.
Loosen relevant stopper screws with an Allen key.
Lengthen left back and right operated front roll
shades by slightly turning and moving the inner
stopper towards the clutch (1). Shorten the shade
by turning and moving the inner stopper away from
the clutch (2).
1
B
A
B
A
Lengthen right back and left operated front roll
shades by slightly turning and moving the outer
stopper away from the clutch (A). Shorten the
shade by turning and moving the outer stopper
towards the clutch (B).
Refasten the screws very tight. Slide the clutch back
into the tube.
Lengthen right back and left operated front roll
shades by slightly turning and moving the outer
stopper away from the clutch (A). Shorten the
shade by turning and moving the outer stopper
towards the clutch (B).
Tighten screws very fast. Slide the clutch back into
the tube.
2
Loading...