Hunter Memphis User Manual

www.HunterFan.com

1.888.830.1326

1

M3592-01 • 12/14/15 • © 2015 Hunter Fan Company

PAG E

5

30 inches

7 feet

PAG E

2

What to Expect with

Your Installation Ceiling Bracket

Ladder

PAG E

3

Tools Needed

Troubleshooting

Table of Contents

PAG E

9

Wiring

PAG E

6

Downrod

PAG E

15

Remote

Control Cradle

Canopy

PAG E

10

PAG E

17

PAG E

4

Mounting Options

?

?

?

PAG E

18

Congratulations on purchasing your new
Hunter® ceiling fan! It will provide comfort

and performance in your home or ofce for

many years. This installation and operation
manual contains complete instructions for
installing and operating your fan.

We are proud of our work and appreciate
the opportunity to supply you with the best
ceiling fan available anywhere in the world.

Light Kit

PAG E

12

PAG E

16

Remote Control

PAG E

14

Operation,

Maintenance & Cleaning

PAG E

11

Blades

www.HunterFan.com

1.888.830.1326

2

M3592-01 • 12/14/15 • © 2015 Hunter Fan Company

What to Expect with Your Installation

Know your wiring

If you are unfamiliar
with wiring, use a

qualied electrician.

You may need a
friend to help you.

Check box to see
fan weight

Assess location

30 inches

from blade tip
to nearest wall
or obstruction

7 feet

from bottom

edge of blade

to the oor

Select a downrod length

Assess ceiling angle

Must be able to
secure the fan to
building structure or
fan-rated outlet box

1

2

3

Standard Downrod

for ceilings 8-10 feet high

Shorter Downrod

for fans installed close to ceiling

Longer Downrod

for ceilings 10 feet or higher

Ceiling angles greater
than 34° will require an
Angled Mounting Kit.
See page 4 for details.

w.1 - To reduce the risk of re, electrical shock, or personal injury,

mount fan directly from building structure and/or an outlet box marked
acceptable for fan support of 70 lbs (31.8 kg) and use the mounting
screws provided with the outlet box.

w.2 - To avoid possible electrical shock, before installing or servicing your
fan, disconnect the power by turning off the circuit breakers to the outlet
box and associated wall switch location. If you cannot lock the circuit
breakers in the off position, securely fasten a prominent warning device,
such as a tag, to the service panel.

w.3 - To reduce the risk of re, electrical shock, or motor damage, use only
Hunter Solid State Speed Controls.

w.4 - To reduce the risk of personal injury, do not bend the blade brackets when

installing the blade brackets, balancing the blades, or cleaning the fan. Do not

insert foreign objects in between rotating fan blades.

c.1 - All wiring must be in accordance with national and local electrical codes

ANSI/NFPA 70. If you are unfamiliar with wiring, use a qualied electrician.

c.2 - Use only Hunter replacement parts.

This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses and can radiate
radio frequency energy and if not installed and used in accordance with the
instructions may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or
more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Caution: modications not approved by the party responsible for compliance

could void user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including
interference that may cause undesired operation.

Read and Save These Instructions

This product conforms to UL Standard 507.

WARNINGS

CAUTIONS

www.HunterFan.com

1.888.830.1326

3

M3592-01 • 12/14/15 • © 2015 Hunter Fan Company

Tools Needed

Ladder

Power Drill

(optional)

9/64” Drill Bit

(optional)

Screwdrivers

Pliers Wire Strippers

If mounting to a support structure, you will also need these tools.

www.HunterFan.com

1.888.830.1326

4

M3592-01 • 12/14/15 • © 2015 Hunter Fan Company

If you have an angled ceiling:

1. You will need a longer downrod (sold separately).

2. If your ceiling angle is greater than 34°, you will
also need an Angled Mounting Kit (sold separately).

Guide Touches

BOTH Ceiling & Wall

S

I

T

U

A

T

I

O

N

1

Guide Touches

Wall

but NOT Ceiling

S

I

T

U

A

T

I

O

N

2

You need BOTH

a Longer

Downrod &

an Angled

Mounting Kit

You need ONLY

a Longer

Downrod

*most common

If you have a at ceiling:

Hang your fan by a standard downrod (included).

Mounting Options

Use Standard Mounting

or Low-Prole Mounting

to hang the fan from a at ceiling.

Use Angled Mounting

to hang the fan from a

vaulted or angled ceiling.

34

O

CEILING

WALL

OPTION

1

Standard
Mounting

OPTION

2

Angled
Mounting

2 3

SLIDE

toward ceiling

PLACE

against wall

1

FOLD

on dotted line

34°

Use the three steps below to determine if your ceiling angle is greater than 34°

Support
Structure

Ceiling

Outlet Box

(required)

Angled
Mounting
Style

Standard
Mounting
Style

Support
Structure

Ceiling

Outlet Box

(required)

www.HunterFan.com

1.888.830.1326

5

M3592-01 • 12/14/15 • © 2015 Hunter Fan Company

Ceiling Bracket

Refer to warning w.1 on pg. 2

To avoid possible electrical shock, before
installing your fan, disconnect the power by
turning off the circuit breakers to the outlet

box associated with the wall switch location.

For angled ceilings, point

opening toward peak.

If you are unable to do this,

call Technical Support at

1-888-830-1326.

Make sure all four bumpers are

still attached.

Use wood screws
(included) when securing
to support structure with
approved electrical outlet
box. Drill 9/64” pilot holes

in support structure to aid
in securing ceiling bracket

with hardware found in

the hardware bag.

Use machine screws

(provided with outlet

box) when securing to

existing ceiling fan-rated

outlet box. Make sure
it is securely installed

and is acceptable for fan

support of 31.8 kg (70 lbs)

or less.

OFF

Turn Power

www.HunterFan.com

1.888.830.1326

6

M3592-01 • 12/14/15 • © 2015 Hunter Fan Company

Downrod

Slide

Slide

1 2 3 4 5

678910

Sold Separately

Sold Separately

Longer
Downrod

for angled
ceilings or
ceilings 10’ or
higher

Shorter
Downrod

for fans installed
close to ceiling

Standard
Downrod

for ceilings 8-10’ high

Option 1Option 2

Option 3

skip to next page

If you need a different downrod length follow these steps:

Steps 1-5 to remove standard downrod pipe

Steps 6-10 to reassemble with new pipe

Included

(pre-assembled)

www.HunterFan.com

1.888.830.1326

7

M3592-01 • 12/14/15 • © 2015 Hunter Fan Company

KEEP!

8”

3/8”

C

U

T

&

S

T

R

I

P

(not to scale)

Remove the pre-installed

setscrew so that the downrod

can be inserted.

Hand tighten the downrod (at

least 4-5 full turns) until it stops.

The wires can be cut, but

leave at least 8” extending

from the top of the downrod.

Downrod (continued)

8”

3/8”

Tighten the setscrew

with pliers. DO NOT

HAND TIGHTEN.

If the setscrew is not tightened
securely, the fan may fall.

K

E

E

P

!

www.HunterFan.com

1.888.830.1326

8

M3592-01 • 12/14/15 • © 2015 Hunter Fan Company

Downrod (continued)

Put the wires and downrod through the

canopy. Let the canopy sit loosely on top

of the fan.

DO NOT PICK THE FAN UP BY THE

CANOPY OR WIRES. Place the downrod

ball into the slot in the ceiling bracket.

www.HunterFan.com

1.888.830.1326

9

M3592-01 • 12/14/15 • © 2015 Hunter Fan Company

Note: If you have a dual switch,

please cap the secondary power

wire from the ceiling. This will

result in one unused switch.

Wiring

F

R

O

M

F

A

N

F

R

O

M

C

E

I

L

I

N

G

B

R

A

C

K

E

T

F

R

O

M

F

A

N

Using an orange wire

connector from

the hardware bag,

connect the 3 grounding

wires (green, green/

yellow stripe, or bare

copper) coming from the

ceiling, downrod, and

hanging bracket.

(Grounding)

Green/Yellow

Stripe

Green/Yellow
Stripe

White

Black

(Grounded)

Note: To connect the wires,

hold the bare metal leads
together and place a wire

connector over them, then

twist clockwise until tight.

Not for use in

applications where the

fan does not have a

wall switch.

Using the orange wire

connectors from

the hardware bag, connect

the black wire (ungrounded)

from the ceiling to the black

from the fan. Connect the

white wire (grounded) from the

ceiling to the white wire from

the fan. Cap the blue wire from

the fan with an orange wire

connector. It will not be used

for single switch wiring

Using the orange wire

connectors from

the hardware bag,

connect the white wire

(grounded) from the

ceiling to the white wire

from the fan.

Connect the black wire

(ungrounded) from the

ceiling to the black wire

from the fan. Connect the
second (ungrounded) wire
from the ceiling to the blue

wire from the fan.

F

R

O

M

F

A

N

White

(Ungrounded)

Black

Blue

(Grounded)

F

R

O

M

C

E

I

L

I

N

G

(Ungrounded)

Blue

For Dual Switches

For a Single Switch

F

R

O

M

C

E

I

L

I

N

G

F

R

O

M

C

E

I

L

I

N

G

Turn the splices upward and push them carefully back through the hanger bracket

into the outlet box. Spread the wires apart, with the grounded wires on one side of

the outlet box and the ungrounded wires on the other side of the outlet box.

Refer to CAUTION c.1 on pg. 2

(Ungrounded)

www.HunterFan.com

1.888.830.1326

10

M3592-01 • 12/14/15 • © 2015 Hunter Fan Company

Canopy

Position the canopy so that, when

lifted into place, the canopy ts into

the hanging bracket as shown.

Lift the canopy into place so that

the screw holes are aligned.

Screw

Holes

Insert the two canopy screws

found in the hardware bag.

www.HunterFan.com

1.888.830.1326

11

M3592-01 • 12/14/15 • © 2015 Hunter Fan Company

Blades

Put the blade washers found in the hardware

bag onto the blade screws found in the

hardware bag. Then install the blade screws to

secure each blade to a blade iron.

www.HunterFan.com

1.888.830.1326

12

M3592-01 • 12/14/15 • © 2015 Hunter Fan Company

Light KitLight Kit

Screw two housing assembly screws

from the hardware bag halfway into

the motor housing. It does not matter

which two screw holes you choose.

Wrap keyhole slots around the screws

and twist counterclockwise.

Insert the third screw, found in the

hardware bag, into place and then

tighten all three screws.

www.HunterFan.com

1.888.830.1326

13

M3592-01 • 12/14/15 • © 2015 Hunter Fan Company

Light Kit (continued)

CONGRATULATIONS!

YOU’RE DONE!

See next page for remote
operation instructions.

Connect the white wire from the fan to

the white wire from the light kit. Then,

connect the blue wire from the fan to the

black wire from the light kit.

Lift the globe and align the notches in
the globe with the tabs in the light kit.

Attach the globe by lifting and twisting

counterclockwise until it rests rmly in place.

www.HunterFan.com

1.888.830.1326

14

M3592-01 • 12/14/15 • © 2015 Hunter Fan Company

Remote Control

To access the battery compartment, remove
the small Phillips head screw that secures the
battery door to the transmitter assembly. The

battery should be installed with the positive

(+) side up. Replace with a CR2032 battery

when necessary.

Phillips
Head
Screw

Battery
Door

ON

Turn Power

The remote transmitter is already paired to the

receiver and ready to use.

Note: If your need to pair your remote, remove the battery

door. Cycle power to the fan by turning power off and back on

at the wall switch (or circuit breaker if necessary). Within three

minutes, press the pair button on the remote. If pairing was

successful, a single beep will sound. If three beeps sound, the

remote was unpaired. Re-pair using the steps above.

To prevent faulty operation, please disconnect power from

all other ceiling fans within range while pairing.

www.HunterFan.com

1.888.830.1326

15

M3592-01 • 12/14/15 • © 2015 Hunter Fan Company

Remote Control Cradle

Option 1: Using Screws

Option 2: Using Adhesive Strip

Install the cradle bracket to the wall with

the included screws.

You have two options to install the included remote control cradle
to the wall. Choose which path works best for you.

Choose your cradle installation location.

If you are installing into drywall, drill two

9/64 width holes using the cradle bracket

as a guide. Gently hammer the included

drywall anchors into the pre-drilled holes.

Press the cradle bracket

against the wall and hold

rmly for 30 seconds.

Separate the lining from
the back of the adhesive

strip on the cradle bracket.

Slide the cradle onto the

mounted bracket.

Remove the cradle from

the cradle bracket.

www.HunterFan.com

1.888.830.1326

16

M3592-01 • 12/14/15 • © 2015 Hunter Fan Company

Fan Operation:

Press and quickly release the fan button on the

remote control to turn the fan OFF or ON. Use the

fan control directional pad to raise or lower the fan

to the desired speed

Light Operation:

Press and quickly release the light button on the
remote control to turn the light OFF or ON. Press

and hold the light button for continuous dim.

Operation, Maintenance, and Cleaning

Light
Button

Fan
Button

Fan
Control

Cleaning the fan - use soft brushes or cloths

to prevent scratching. Cleaning products

may damage the nishes.

Slide the remote into the

cradle when not in use.

www.HunterFan.com

1.888.830.1326

17

M3592-01 • 12/14/15 • © 2015 Hunter Fan Company

Note: The HomeKit identication number is located on the

front cover of the English side of the Parts Guide.

SIMPLEconnect connects to available 2.4 GHZ WiFi networks.

Launch the app.

Follow the onscreen prompts to set up your fan.

Download the app:

Visit your app store and search simpleconnect to nd the app.

1

2

3

www.HunterFan.com

1.888.830.1326

18

M3592-01 • 12/14/15 • © 2015 Hunter Fan Company

Troubleshooting

Excessive wobbling

• Make sure the blades are
properly installed on the
blade iron posts.

• Turn the power off, support
the fan carefully, and check
that the hanger ball is
properly seated.

• Use the provided balancing
kit and instructions to balance
the fan.

Noisy Operation

• Make sure the blades are
properly installed on the
blade iron posts.

• Check to see if any of the
blades are cracked. If so, replace
all of the blades.

Wireless Issues

• Reset the Wi-Fi module by
removing the battery door.
Press and hold the reset
button for 5 seconds. The fan
and light LEDs will flash once
the module has been reset.

Fan doesn’t work

• Make sure power switch is on.

• Pull the pull chain to make sure
it is on.

• Push the motor reversing switch

rmly left or right to ensure that

it is engaged.

• Check the circuit breaker to
ensure the power is turned on.

• Make sure the blades spin freely.

• Turn off power from the circuit
breaker, then loosen the canopy
and check all the connections
according to the wiring diagram
on pages 9.

• Check the plug connection in
the switch housing.

Remote control of fan is erratic

• Make sure the battery is
installed correctly.

• Install a fresh battery.

Transmitter only works when
held at close range

• Change battery.

If you have multiple remotes or
multiple remote-controlled fans
installed on the same circuit
breaker and you are experiencing

interference or faulty operation of
your remote controls, please go to
www.HunterFan.com/FAQs
and click “How do I properly install
multiple remote-controlled fans?”
for information on how to correct
this issue.

Use of the HomeKit logo means that an electronic

accessory has been designed to connect specically

to iPod, iPhone, or iPad, respectively, and has been

certied by the developer to meet Apple performance

standards. Apple is not responsible for the operation
of this device or its compliance with safety and
regulatory standards. Please note that the use of
this accessory with iPod, iPhone, or iPad may affect
wireless performance.

Compatible with iOS 7.1 or higher / Android 4.3 or higher
Android and Google Play are trademarks of Google Inc.
Apple logo is a trademark of Apple, Inc.
App store is a service mark of Apple, Inc.