Hunter 99164, 99165, 99166 User Manual
Traditional Globe
Traditional Globe
Light Kit
Light Kit
Installation Manual
Compatible with:
2xxxx Types A - Z
51000-58999 fan series
59500-59999 fan series
Select Casablanca Fans
MA022-01 • 03/07/14
Models 99164, 99165, 99166
1.888.830.1326
BEFORE YOU BEGIN
Read entire installation instructions carefully before
beginning installation and save these instructions.
Switch
Housing
Your light kit is compatible with most ceiling fans. The light kit will attach to the fan’s
switch housing. Begin on page 3 where you will choose the type of switch housing that
most closely resembles the one on your fan. From there, you will be directed to the set
of assembly instructions that are appropriate for installing the light kit to your fan.
READ AND SAVE THESE INSTRUCTIONS
This product conforms to UL Standard 507.
WARNINGS
w.1 - To reduce the risk of re, electrical shock, or personal injury,
mount fan directly from building structure and/or an outlet box marked
acceptable for fan support of 70 lbs. (31.8 kg) and use the mounting screws
provided with the outlet box.
w.2 - To avoid possible electrical shock, before installing or servicing your
fan, disconnect the power by turning off the circuit breakers to the outlet
box and associated wall switch location. If you cannot lock the circuit
breakers in the off position, securely fasten a prominent warning device,
such as a tag, to the service panel.
CAUTIONS
c.1 - All wiring must be in accordance with national and local electrical codes
ANSI/NFPA 70. If you are unfamiliar with wiring, use a qualied electrician.
2
MA022-01 • 03/07/14
Turn Power
OFF
1.888.830.1326
WHICH ASSEMBLY METHOD WILL I USE?
Choose one of the four images below that most closely resembles the switch
housing on your fan; then follow the instructions under the image.
Switch
Housing
Cap
Cap
Screw
If you are installing this light kit onto
a Hunter Original, remove the cap
screws with a Phillips head screwdriver.
Keep the screws Remove the cap.
Then follow the TYPE-A ASSEMBLY
INSTRUCTIONS on pages 4-5.
Switch
Housing
Screw
Switch
Housing
Cap
If your fan’s switch housing cap
resembles this one, remove
the whole switch housing by
removing the switch housing
screws with a Phillips head
screwdriver. Remove the two
cap screws from the inside of
the switch housing. Reinstall
the switch housing. Tighten the
switch housing screws. Then
follow the TYPE-B ASSEMBLY
INSTRUCTIONS on pages 6-7.
Cap
Screw
If your fan’s switch housing cap
resembles this one, remove the cap
screws with a Phillips head screwdriver.
Then follow the TYPE-B ASSEMBLY
INSTRUCTIONS on pages 6-7.
Switch
Housing
Screw
Plug
Button
If your fan’s switch housing cap
resembles this one, remove
the whole switch housing by
removing the switch housing
screws with a Phillips head
screwdriver. Remove the plug
button. Then follow the TYPE-C
ASSEMBLY INSTRUCTIONS on
pages 8-9.
3
MA022-01 • 03/07/14
Switch
Housing
Cap
Plug
Button
Switch
Housing
Screw
If your fan’s switch housing
cap resembles this one,
remove the whole switch
housing by removing the
switch housing screws with
a Phillips head screwdriver.
Remove the plug button using
a standard screwdriver. Then
follow the TYPE-D ASSEMBLY
INSTRUCTIONS on pages 10-11.
TYPE-A ASSEMBLY INSTRUCTIONS
1.888.830.1326
1
Switch
Housing
If your fan does not have pin connectors on
the wires coming from the switch housing,
install the wiring harness provided. Using
the provided wire connectors connect the
white wire from the fan to the white wire
from the wire harness and connect the
black or blue wire from the fan to the black
wire from the wire harness.
Wire
Connector
3
2
Switch
Housing
Screw
Using the switch housing screws that you
removed from the cap, install the adapter.
Adapter
4
Using the single pin connectors,
connect the black or blue wire from the
fan to the black wire from the light kit.
Connect the white wire from the fan to
the white wire from the light kit.
MA022-01 • 03/07/14
Adapter
Mounting
Screw
Lift the light kit up to meet the lower
switch housing. Using the mounting
screws found in the hardware bag,
install the light kit to the adapter.
4
Loading...