Leti
Installation Manual
Model: 50780 Noble Bronze 50783 Matte Black
Fan weight ±2 lbs: 17.8 lbs (8.1 kg)
©2020 Hunter Fan Co.
PG3896 r030220
Congratulations on purchasing your new Hunter® ceiling fan!
The ceiling fan you purchased will provide comfort and performance in your home or office for many years. This instruction manual contains complete instructions for installing and operating your fan. We are proud of our work and appreciate the opportunity to supply you with the best ceiling fan available anywhere in the world.
We are here to help!
This Instruction Manual is designed to make installation as simple as possible. While working through this Instruction Manual, keep your smartphone or tablet nearby. We have added video links to help you through the more technical sections. If you are unfamiliar or uncomfortable with wiring, contact a qualified electrician. We also provide telephone support at 1.888.830.1326 or visit us
at HunterFan.com.
READ and SAVE These Instructions |
1886 |
WARNING |
Warning
w.1 - To reduce the risk of fire, electrical shock, or personal injury, mount fan directly from building structure and/or an outlet box marked acceptable for fan support of 70 lbs (31.8 kg) and use the mounting screws provided with the outlet box.
w.2 - To avoid possible electrical shock, before installing or servicing your fan, disconnect the power by turning off the circuit breakers to the outlet box and associated wall switch location. If you cannot lock the circuit breakers in the off position, securely fasten a prominent warning device, such as a tag, to the service panel.
w.3 – To reduce the risk of electric shock, this fan must be installed with an isolating wall control/switch.
w.4 - To reduce the risk of personal injury, do not bend the blade brackets when installing the blade brackets, balancing the blades, or cleaning the fan. Do not insert foreign objects in between rotating fan blades.
Caution
c.1 - All wiring must be in accordance with national and local electrical codes ANSI/NFPA 70. If you are unfamiliar with wiring, use a qualified electrician. c.2 - Use only Hunter replacement parts.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.
•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
•Consult the dealer or an experienced radio/TV technician for help.
Caution: modifications not approved by the party responsible for compliance could void user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This product conforms to UL Standard 507.
Here are the tools you’ll need to complete your installation:
|
|
|
|
|
|
|
Ladder |
|
|
Screwdriver |
|||
|
||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Wire Strippers |
||
Pliers |
|
OPTIONAL |
|
If mounting to a support structure, you will also need these tools. |
|
Drill |
9/64” Drill Bit |
© 2020 Hunter Fan Company
7130 Goodlett Farms Pkwy, Suite 400
Memphis TN 38016
1
1886
Here is what comes in your box:
We recommend that you pull everything out of the box and lay it out. We have grouped the drawn components below with the hardware you’ll need for those parts. The screws below are drawn to scale to make it easier to identify what piece of hardware is needed to install each component.
Hunter Pro Tip:
Do not discard the hardware bags or mix parts from different bags. Make note of the symbol printed on each hardware bag. The symbols can be used to identify the appropriate hardware for each step.
|
Wood Screw |
x2 |
Ceiling Bracket |
|
|
|
|
||
|
|
|
|
|
bag |
|
|
|
|
Washer |
Wire Nut |
|
Canopy |
|
x2 |
x4 |
|
Canopy Screw |
|
|
|
|
|
|
For installing the hanger bracket and wiring the fan |
|
|
bag |
x2 |
|
|
|
||
|
|
|
|
For installing the canopy |
|
|
|
Adapter Cover |
|
|
|
|
|
|
|
Downrod |
bag |
x6 |
bag |
x6 |
|
x9 |
|
Blade Washer |
Blade Iron |
bag |
Blade Screw |
Motor |
||
|
|
|
Screw |
|
|
|
Blade x3 |
|
|
Blade Iron x3 |
Upper Swith Housing |
|
For installing the blades |
||
|
||
|
LED Module |
|
|
Glass |
|
Wall Control |
|
bag Light Kit Screw
bag |
Spare Parts |
|
For installing the light kit |
For your convenience, |
|
Remote Receiver |
|
|
|
||
you may receive extra fasteners. |
|
||
|
|
||
|
|
Note: |
Find a part that is missing or damaged? |
|
|
Fan style may vary. |
Don’t take it back to the store. Let us make it right. Visit us at HunterFan.com or call us at 1.888.830.1326. |
M3810-01 r030220 |
2 |
|
|
|
|
1886
Choosing the Right Installation Location
You probably bought this fan with a location in mind. Let’s check below to make sure it is a good fit.
Check the room dimensions: |
Check the outlet box: |
30 in |
|
from blade tip to |
|
nearest wall or |
|
obstruction |
7 ft |
|
|
|
from bottom edge |
|
of blade to the |
|
floor |
You must be able to secure the fan to building structure or fan-rated outlet box.
Checking the Ceiling Angle:
Standard Mounting
Support Structure
Ceiling
Outlet Box
(required)
If you have a flat ceiling:
Hang your fan by a standard downrod. Some fans come with a shorter downrod for a Low Profile installation.
|
Mounting |
Support |
|
Structure |
|
|
|
|
Angled |
|
|
|
|
Ceiling |
|
|
Outlet Box |
|
|
(required) |
If you have an angled or vaulted ceiling:
1. You will need a longer downrod. (Sold separately at HunterFan.com)
2. If your ceiling angle is greater than 30°, you will also need an Angled Mounting Kit. (Sold separately at HunterFan.com)
Angled Mounting
<![endif]>WALL
A little more information on Angled Mounting:
For optimum performance and appearance, a longer downrod should be used with your Hunter ceiling fan when installing on high or angled ceiling. If your ceiling is angled greater than 30° you will also need an Angled Mounting Kit. Longer downrods and the Angled Mounting Kit are sold separately at HunterFan.com.
Hunter Pro Tip:
Determining if you need an Angled Mounting Kit:
Fold on the dotted line. Place edge against the wall. Slide towards the ceiling.
If the guide touches the wall but not the ceiling, you need an angled mounting kit.
30°
CEILING
3