Hunter 44377 Owner's Manual

I N S T A L L A T I O N

5 MINUTE

Owner’s Manual

English

Model

44372 44377

7 Day Programmable

M T

T F S S

Table Of Contents

At A Glance

Know Your ermostat . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Setup

Setting Day and Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

Scheduling

Scheduling Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

Personal Scheduling Charts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

Setting Your Schedule . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

Temporary Temperature Change . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20

Turning Oﬀ Scheduling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22

Home Today . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24

Save Away . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26

Features

Alerts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28

Menu Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32

Energy Saver Bar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38

Additional Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40

ermostat Assistance

Troubleshooting and Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41

Technical Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43

Warranty

1 Year Guarantee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44

44040-01 • 05/11/2010

Your thermostat has been pre-programmed from the factory with no programming necessary. We recommend using these pre-programmed settings for a few days before altering them as they offer maximum energy saving benets. If you do decide to alter your programs, use the charts on page 13 to write out your scheduled times and temperatures. After you have recorded your preferences, follow the instructions on page 14 to alter your temperature settings.

There is no need to program the thermosat at the wall it is mounted to! Remove the thermostat from the backplate by gripping the sides rmly and pulling it straight off. This allows you to program the thermostat in comfort.

After you have programmed your thermostat, no other setting changes are necessary unless you wish to browse through the menu to see how you may further adjust the independent settings of your thermostat to meet your lifestyle. The features section starting on page 32 of this manual will describe these settings. Most setting have been preset for optimal performance.

If you need any assistance with installion or setup of your new Hunter Thermostat, please call us, our technical support staff are ready to help!

USA: 1-888-830-1326

Canada: 1-866-268-1936

Hours of operation are from 7:00 am to 7:00 pm Monday - Friday and 8:00 am to 5:00 pm on Saturday, Central Time. You may also contact us over the Internet at:

www.hunterfan.com

At A Glance

Know Your ermostat

At A Glance

Know Your ermostat

1. Enters Schedule Setup for altering scheduled programs.

2. Sets the Home Today feature for when you are home during a regularly scheduled Away period.

3. Sets the Save Away feature for when you will not be home during a regularly programmed time.

4. Conrms completion of an action or returns you to the Home screen.

5. Allows access to the advanced features of the thermostat.

6. Moves you forward or backward while setting up features or schedules.

7. Adjusts time and temperature settings as well as moving up or down menu lists.

8. Indicates whether the system is set to Heat, Cool, or Off.

9. Shows if the fan is set to Auto or On modes.

10. Allows you to switch between Heat, Cool, and Off modes.

11. Allows you to switch between fan Auto and On modes.

44040-01 • 05/11/2010

Home

Know Your ermostat

At A Glance

one

At A Glance

Know Your ermostat

1. Holds 2 “AA” Batteries.

2. HE/HG Switch - allows you to set your furnace to Gas/Oil or Electric, based on the type of system you have.

3. Conventional/Heat Pump System Switch - Allows your thermostat to operate your HVAC system properly by selecting the system type that you have.

* Conventional System: Uses a condensing unit for cooling and a seperate

furnace system for heating.

* Heat Pump System: Uses the condensing unit for both heating and cooling.

NOTE: If you are unsure of your system type it may be necessary to contact our

technical support department, your HVAC manufacturer, or a local HVAC technician to determine this. Improper selection of your system type could cause the thermostat to not operate your system properly.

44040-01 • 05/11/2010

Know Your ermostat

At A Glance

Know Your ermostat

1. Shows the current day of the week or weekend.

2. Indicates the thermostat is running in schedule mode.

3. Flashes when the furnace lter should be checked for replacement.

4. On when the current schedule period is running.

5. Shows the current mode of the fan: Auto or On.

6. C will display when in Celsius mode. Nothing will display when set to Fahrenheit.

7. Indicates the current active schedule period.

8. Shows the system fan is running.

9. Indicates the current room temperature.

10. Indicates your Heat Pumps Auxiliary Heat is running.

11. Shows when the Home Today feature is running.

12. On when the current operating mode, heat or cool, is running.

13. Current operating mode, heat or cool.

14. Low battery warning, indicates you need to replace the batteries in the thermostat.

15. Indicates the current time in am or pm .

16. Current Set temperature the thermostat is scheduled to run.

17. Indicates the Thermostat is running in save away mode.

18. Will show when your heat pump or system is reporting a problem to the Thermostat.

19. Indicates in hours or days how long the Save Away period is set for.

20. Energy saver bar helps you make decisions on conserving energy.

21. Indicates the thermostat is locked and will not accept input.

44040-01 • 05/11/2010

Know Your ermostat

At A Glance

Mon

Filter

Auto

At Home

Aux Em.

Hours

Check H.P.!

Energy Savings:

Good

Heat to

Best!

Lock

Setup

Setting Day and Time

Once you install the batteries, the thermostat will prompt you to set the current day and time.

1. You will notice that “Mon” will be ashing at the top left of your screen. Use the or buttons to move to your current day of the week and press the

button to

advance to the next step.

2. Use the or button to change between am and pm. Choose

3. Next you will select your current hour by using the or buttons. The

to advance.

button

advances you to the next step.

4. Set your minutes using the or and press

Done/ Home

to nish or

Back

if you need to

make a correction to a previous step.

5. When nished, the thermostat will show “Updated!” to conrm your settings are saved.

6. Your thermostat will next prompt you to set your programming, see page 14 step 2 if you wish to alter your programs at this time.

44040-01 • 05/11/2010

Schedule

Save Away

Home Today

Back

Schedule

Save Away

Home Today

Schedule

Save Away

Home Today

Mon

Schedule

Save Away

Home Today

Mon

Setting Day and Time

Setup

1-2

Mon

Back

Done/ Home

Back

Done/ Home

Back

Updated!

Done/ Home

Scheduling

Scheduling Introduction

Read the scheduling section thoroughly to ensure you understand your scheduling options and which will best t with your lifestyle. The following notes should help you with scheduling:

* The schedule time can be set in 15 minute increments, and remains the same for both Heat

and Cool programs.

* The scheduled temperature can be set in increments of 1°F (1°C).

* After 15 minute without a key press, the thermostat will return to the home display screen.

* When setting the schedule time, note the AM / PM indicator.

* At any stage during your scheduling, you can use the

Done/

backwards through the steps.

Home

will save any changes, even if you have not scheduled or

Back

buttons to move forward or

altered all settings.

* Arrows beside each schedule mode and beside heat/cool modes will indicate which ones are

active.

This thermostat has been pre-programmed to provide optimal energy savings. No programming is necessary. We recommend you run these programs for a few days before adjusting your programming. If it is necessary to change these settings, use the scheduling table on the next page to record your new settings. You will also nd the default schedule there as well.

44040-01 • 05/11/2010

Personal Scheduling Charts

Scheduling

Day Away Asleep Home

Start Time: 8:00am

Monday-Friday

Saturday

Sunday

Default Schedule

End Time: 4:00pm Heat Temp: 60 Cool Temp: 85 Start Time: 8:00am End Time: 4:00pm Heat Temp: 60 Cool Temp: 85 Start Time: 8:00am End Time: 4:00pm Heat Temp: 60 Cool Temp: 85

F (16OC)

F (29OC)

F (16OC)

F (29OC)

F (16OC)

F (29OC)

* The Home schedule automatically calculates the remaining times from Away and Asleep and assigns them

the Home temperature.

Start Time: 10:00pm End Time: 6:00am Heat Temp: 60 Cool Temp: 82 Start Time: 10:00pm End Time: 6:00am Heat Temp: 60 Cool Temp: 82 Start Time: 10:00pm End Time: 6:00am Heat Temp: 60 Cool Temp: 82

F (16OC)

F (28OC)

F (16OC)

F (28OC)

F (16OC)

F (28OC)

Heat Temp: 68

Cool Temp: 78

Heat Temp: 68

Cool Temp: 78

Heat Temp: 68

Cool Temp: 78

F (20OC)

F (26OC)

F (20OC)

F (26OC)

F (20OC)

F (26OC)

Day Away Asleep Home

Start Time:

Monday-Friday

Saturday

Sunday

Alternate Schedule

End Time: Heat Temp: Cool Temp: Start Time: End Time: Heat Temp: Cool Temp: Start Time: End Time: Heat Temp: Cool Temp:

Note: Use a pencil so these records may be changed at a later time if necessary.

Start Time: End Time: Heat Temp: Cool Temp: Start Time: End Time: Heat Temp: Cool Temp: Start Time: End Time: Heat Temp: Cool Temp:

Heat Temp:

Cool Temp:

Heat Temp:

Cool Temp:

Heat Temp:

Cool Temp:

Scheduling

Setting Your Schedule

1. Press the

Schedule

Button to enter Scheduling mode.

2. Use the

or buttons to select “On” and then

to move forward to Scheduling.

Note: If you do not wish to use the scheduling option on your thermostat, refer to page 22, step 2.

3. Monday will be ashing on the screen, to proceed with scheduling, press to start programming another day, press the

screen and press

or button until it shows at the top of the

4. By default “Away” will be ashing on screen to start your scheduling. Use the

. If you wish

button to

proceed to the next step.

5. Use the press screen for this scheduled period. Press

or buttons to adjust the start time on the left of the screen for the period and

. Again you will use the or buttons to adjust the end time on the right of the

44040-01 • 05/11/2010

again.

+ 31 hidden pages