Hunter 30260 Owner's Manual

True HEPA Air Purifiers

T M

QuietFlo™ 210

QuietFlo™ 260

(Model 30210)

T M

(Model 30260)

These air purifiers use Model 30940 replacement HEPA filters.

These air purifiers use Model 30903 replacement pre-filters.

WWW.HUNTERFAN.COM

IMPORTANT SAFETY INSTRUCTIONS

READ ALL INSTRUCTIONS BEFORE USING THIS AIR

PURIFIER AND SAVE THESE IMPORTANT

INSTRUCTIONS

1. This Air Purifier is designed for use on a flat, level surface and may not work properly on

an uneven surface. ALWAYS place this Air Purifier on a firm, level surface. ALWAYS place the Air Purifier at least six (6) inches away from walls and heat sources such as stoves, radiators, or heaters.

2. Place the Air Purifier in an area that is out of the reach of children.

3. Before using the Air Purifier, extend the cord and inspect for any signs of damage. DO NOT use the product if the cord has been damaged.

4. This product has a polarized plug (one blade is wider than the other) as a safety feature. This plug will fit into a polarized outlet only one way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. DO NOT attempt to defeat or override this safety feature.

5. ALWAYS UNPLUG the Air Purifier when it is not in operation, while the filter is being changed, and while it is being cleaned.

6. DO NOT tilt or move the Air Purifier while it is in operation. Shut off and unplug before moving.

7. DO NOT immerse the Air Purifier in water as permanent damage will occur. Refer to and follow the CLEANING AND FILTER REPLACEMENT instructions.

Introduction

Thank you for purchasing the pany. You have purchased our latest development in portable Air Purification Systems. This system has been developed to improve the quality of the air you breathe.

QuietFlo™

Our quickly and effectively removing dust, smoke, and pollen particles. Room air is pulled in through the front grille and cleaned across the HEP A filter . Clean air is then released out the top grille.

The HEPA filter will remove 99.97% of particles 0.3 microns in size from air that passes through the filter.

The activated carbon pre-filter helps remove cooking, smoke, and pet odors from the air. It also traps lint, hair, and large particles, which helps improve the life and performance of the HEPA filter.

True HEPA Air Purifier out performs other air purification systems by

QuietFlo™

True HEPA Air Purifier from Hunter Fan Com-

Setting Up Your Air Purifier

1. Remove your air purifier from the box and take it out of the clear plastic protective bag.

2. Place your

QuietFlo™

Air Purifier on a firm, flat surface.

3. Before turning the Air Purifier ‘on’, you need to open the front grille. To release the front grille, place your fingers behind the tabs and pull forward. Refer to Figure 1A or 1B.

4. The HEPA filter is already installed in the correct position, but you need to confirm that it is fully inserted. To remove, grasp the edge of the filter frame and pull it forward. Notice the orientation of the flaps and seal, which should be pressed firmly into the filter opening.

5. The carbon pre-filter is mounted inside the front grille with "hook" tape. Confirm that it covers the grille vents. Refer to Figure 2A or 2B on page 4.

6. Place the filter installation reminder sticker on the inside edge of the front grille. Circle the month and write the year of installation for the pre-filter and HEPA filter.

7. Replace the filter and front grille. Be sure that the bottom grille tabs are in position first, and then push the top of the grille forward until it is closed. The unit is now ready for normal operation. NOTE: This unit will not operate unless the door is placed in the correct position.

8. Plug the unit into a 120V electrical outlet.

AIR PURIFIER PARTS

T M

HEPA FILTER

PREFILTER

RECESS FOR FINGERS TO PULL OPEN FRONT GRILLE

FRONT GRILLE

QuietFlo™ 210

FIGURE 1A

T M

RECESS FOR FINGERS TO PULL OPEN FRONT GRILLE

FRONT GRILLE

HEPA FILTER

PREFILTER

QuietFlo™ 260

FIGURE 1B

+ 4 hidden pages