Hunter 22394 Or User Manual

15 AMP SDLID-STATE SPEED CONTROL MODEL E2394

FOR USE WITH AS MANY AS SIX 52' or TEN 42' LISTED WUNTCR SUSPENDED CEILING FANS.

ALL WIRING MUST BE PERFORMED IN ACCORDANCE WITH

CAUTION:

NATIONAL AND LOCAL ELECTRICAL CODES. WE RECOMMEND
INSTALLATION BY A QUALIFIED ELECTRICIAN. DISCONNECT
POWER TO CEILING FANS AT THE MAIN ELECTRIC PANEL
PRIOR TO INSTALLATION.

FACE PLATE

READ AND SAVE THESE
INSTRUCTIONS

MOTOR LINE

CAUTION-RISK OF
ELECTRICAL SHOCK

MINIMUM 2* DEEP

va;_l switch box

POWER LINE
115 VOLTS
60 CYCLE

SPEED CONTROL-

VIRE NUT

IF 4 VIRES ARE SEEN IN
WALL BOX CONNECT EACH
SPEED CONTROL LEAD TO A
BLACK VIRE. SEE FIGURE.
IF 2 VIRES ARE SEEN,
CONNECT EACH TO A SPEED
CONTROL LEAD. USE VIRE
NUTS SUPPLIED.

KNOB

NDTL' USE OF A LIGHT KIT WITH ANY CEILING FAN DECREASES THE MAXIMUM NUMBER

□ F FANS THAT MAY BE SAFELY USED WITH THIS CONTROL. ADD UP THE' TOTAL

WATTAGE OF LIGHT BULBS BEING USED, DIVIDE BY 120, AND SUBTRACT THIS
RESULTANT LINE CURRENT FROM 15 AMPS. WHATEVER IS LEFT IS THE MAXIMUM
CURRENT THAT THE TOTAL NUMBER OF CEILING FANS CAN DRAW. FOR SAFETY,
CONSIDER THAT EACH 52' FAN MOTOR DRAWS 1.0 AMPS AND EACH 42' FAN

DRAWS 0.6 AMPS or LINE CURRENT.

}iOO fAttCO AVtMUC

> f I • c « t • « •

WPHIt TK I > 4

(¿) MUHTIR RAN COMRAHY

FGRM 4073.0

B.F #1306 A400.'? 3

} 0