Hunter 20725 Owner's Manual

For Your Records and Warranty Assistance

For reference, also attach your receipt or a copy of your receipt to the manual.

Type 2 ModelsType 2 ModelsType 2 Models

__________________________________________ Model Name

__________________________________________ Model No.

__________________________________________ Date Purchased

__________________________________________ Where Purchased

Owner’s Guide and Installation Manual

English Español

Table Of Contents

1 • Getting Ready. . . . . . . . . . . . . . . . . . . . . . 4

2 • Installing the Ceiling Plate . . . . . . . . . . 5

3 • Assembling and Hanging the Fan . . . 6

4 • Wiring the Fan . . . . . . . . . . . . . . . . . . . . . 8

5 • Installing the Canopy and Canopy

Trim Ring . . . . . . . . . . . . . . . . . . . . . . . . . 9

6 • Assembling the Blades . . . . . . . . . . . . .10

7 • Activating Perfect BalanceTM . . . . . . . 11

8 • Completing Your Installation With or

Without a Bowl Light Fixture . . . . . .12

9 • Operating and Cleaning Your Ceiling

Fan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16

10 • Troubleshooting . . . . . . . . . . . . . . . . . .17

Welcome

Your new Hunter® ceiling fan is an addition to your home or oce that will provide comfort and performance for many years. is installation and operation manual gives you complete instructions for installing and operating your fan.

We are proud of our work. We appreciate the opportunity to supply you with the best ceiling fan available anywhere in the world.

Before installing your fan, for your records and warranty assistance, record information from the carton and Hunter nameplate label (located on the top of the fan motor housing).

Cautions and Warnings

• READ THIS ENTIRE MANUAL CAREFULLY BEFORE BEGINNING INSTALLATION. SAVE THESE INSTRUCTIONS.

• Use only Hunter replacement parts.

• To reduce the risk of personal injury, attach the fan directly to the support structure of the building according to these instructions, and use only the hardware supplied.

• To avoid possible electrical shock, before installing your fan, disconnect the power by turning o the circuit breakers to the outlet box and associated wall switch location. If you cannot lock the circuit breakers in the o position, securely fasten a prominent warning device, such as a tag, to the service panel.

• All wiring must be in accordance with national and local electrical codes and ANSI/NFPA 70. If you are unfamiliar with wiring, use a qualied electrician.

• To reduce the risk of personal injury, do not bend the blade attachment system when installing, balancing, or cleaning the fan. Never insert foreign objects between rotating fan blades.

• To reduce the risk of re, electrical shock, or motor damage, do not use a solid-state speed control with this fan. Use only Hunter speed controls.

42790-01 • 09/02/09 • Hunter Fan Company

Installer’s Choice and Optional Accessories

Support Brace

Standard Mounting Style

Standard Mounting hangs from the ceiling by a downrod (included).

Support Brace

Ceiling Outlet Box

Angled Mounting Style

Ceiling Outlet Box

Understanding Mounting and Installer’s Choice®

Hunter’s patented 2-position mounting system provides you maximum installation exibility and ease. You can install your Hunter fan in one of two ways, depending on ceiling height and your preference: Standard or Angled mounting. e steps in this manual include instructions for both Installer’s Choice mounting methods.

Considering Optional Accessories

Consider using Hunter’s optional accessories, including a wall-mounted or remote speed control. To install and use the accessories, follow the instructions included with each product. For quiet and optimum performance of your Hunter fan, use only Hunter speed controls.

For ceilings higher than 8 feet, you can purchase Hunter extension downrods. All Hunter fans use sturdy 3/4” diameter pipe to assure stability and wobble-free performance.

CAUTION: To reduce the risk of personal

injury, attach the fan directly to the support structure of the building according to these instructions, and use only the hardware supplied.

Angled Mounting recommended for a vaulted or angled ceiling

42790-01 • 09/02/09 • Hunter Fan Company

1 • Getting Ready

To install a ceiling fan, be sure you can do the following:

• Locate the ceiling joist or other suitable support in ceiling.

• Drill holes for and install wood screws.

• Identify and connect electrical wires.

• Lift 40 pounds.

If you need help installing the fan, your Hunter fan dealer can direct you to a licensed installer or electrician.

Gathering the Tools

You will need the following tools for installing the fan:

• Electric drill with 9/64” bit

• Standard screwdriver (magnetic tip recommended)

• Phillips-head screwdriver (magnetic tip recommended)

• Wrench or pliers

• Ladder (height dependent upon installation site)

Checking Your Fan Parts

Carefully unpack your fan to avoid damage to the fan parts. Refer to the included Parts Guide. Check for any shipping damage to the motor or fan blades. If any parts are missing or damaged, contact your Hunter dealer or call Hunter Technical Support Department at 888-830-1326 (In Canada, call 1-866-268-1936).

Installing Multiple Fans?

If you are installing more than one fan, keep the fan blades and blade irons (if applicable) in sets, as they were shipped.

Preparing the Fan Site

Before you begin installing the fan, follow all the instructions in the pullout sheet called “Preparing the Fan Site.” Proper ceiling fan location and attachment to the building structure are essential for safety, reliable operation, maximum eciency, and energy savings.

42790-01 • 09/02/09 • Hunter Fan Company

2 • Installing the Ceiling Plate

CAUTION: To avoid possible electrical shock, before installing your fan, disconnect the power by turning o the circuit breakers to the outlet box and associated wall switch location. If you cannot lock the circuit breakers in the o position, securely fasten a prominent warning device, such as a tag, to the service panel.

Isolator

Ceiling

Plate

2-1. Drill two pilot holes into the wood support structure through the

outermost holes in the outlet box. e pilot holes should be 9/64” in diameter.

2-2. Your fan comes with four noise isolators. Position the isolators

between the ceiling plate and ceiling by inserting the raised areas on each isolator into the holes in the ceiling plate.

2-3. read the lead wires from the outlet box down through the hole

in the middle of the ceiling plate.

2-4. Align the slotted holes in the ceiling plate with the pilot holes you

drilled in the wood support structure. For proper alignment use slotted holes directly across from each other.

Note: e isolators must be ush against the ceiling. A loose

ceiling plate will result in improper operation of the Perfect BalanceTM system.

2-5. Place a at washer on each of the two 3” wood screws and pass

the screws through the slotted holes in the ceiling plate into the pilot holes you drilled.

Tighten the screws into the 9/64” pilot holes; do not use lubricants

on the screws. Do not over tighten.

Step 2-2

Steps 2-3 – 2-5

For Angled Ceilings: Be sure to

orient the ceiling plate so that the arrows printed on the ceiling plate are pointing toward the ceiling peak.

42790-01 • 09/02/09 • Hunter Fan Company

3 • Assembling and Hanging the Fan

Note: Your Hunter fan comes with an optional downrod extension

pipe. If you are hanging the fan on a ceiling higher than 10 feet tall

pipe. If you are hanging the fan on a ceiling higher than 10 feet tall and you would like to use the enclosed optional downrod, follow

and you would like to use the enclosed optional downrod, follow steps 3-5 – 3-9 on the next page.

steps 3-5 – 3-9 on the next page.

3-1. Unbundle the wires from the fan.

WARNING: Fan may fall if not assembled as directed in these

installation instructions.

Downrod

Canopy

For Standard or Angled mounting:

3-2. Insert the downrod through the canopy and canopy trim ring.

Feed the wires from the fan through the downrod.

3-3. Using the provided Allen wrench, loosen the setscrew on the

adapter to install the pipe and ball assembly. Note: When the

adapter to install the pipe and ball assembly. Note: When the pipe and ball assembly is fully installed, 2-3 threads on the pipe

pipe and ball assembly is fully installed, 2-3 threads on the pipe will still be visible; this is normal. Use the Allen wrench to securely

will still be visible; this is normal. Use the Allen wrench to securely retighten the setscrew.

retighten the setscrew.

CAUTION: e adapter has a special coating on the threads. Do

not remove this coating; the coating prevents the downrod from

not remove this coating; the coating prevents the downrod from unscrewing. Once assembled, do not remove the downrod.

unscrewing. Once assembled, do not remove the downrod.

3-4. Raise the fan and place the hook on the ceiling plate through the

U-shaped hole in the rim.

Allen Wrench

Canopy Trim Ring

Setscrew

Step 3-4

U-shaped

Hole

42790-01 • 09/02/09 • Hunter Fan Company

+ 11 hidden pages

Hunter 20725 Owner's Manual

Specifications and Main Features

Frequently Asked Questions

User Manual