Hunt Electronic HTC-96G28DDN User Manual

Model No. HTC-96G28DDN

IMAGE SENSOR 1/ 3” 960H Color CCD Sensor

EFFECTIVE PIXELS NTSC: 976(H) X 494(V), PAL : 976(H) X 582(V)

SYNC. FORMAT INTERNAL

RESOLUTION HORIZONTAL 700TVL

VIDOE OUTPU T 1.0V (P-P) NTSC COMPOSITE, 75Ω

MIN. ILLUMINATION 0.05LUX (F.1.2, 50 IRE), 0.0001Lux (Sense-Up: On)

S/N RATIO 52dB (AGC OFF, WEIGHT OFF) OR MORE

OSD BUILT-IN

AGC OFF / LOW / MIDDLE / HIGH SELECTABLE

SHUTTER AUTO / FLK / MANUAL / 1/50

SENS-UP OFF / AUTO (X2~X256)

BRIGHTNESS 1~100 STEPS (LEVEL ADJUSTABLE)

D-WDR ON/OFF Level Selectable

BLC LOW / MIDDLE / HIGH SELECTABLE

HSBLC LOW / MIDDLE / HIGH SELECTABLE

WHITE BALANCE ATW / AWB / AWC-SET / MANUAL

DAY / NIGHT COLOR / AUTO / EXT / B/W SELECTABLE

SMART 3DNR ON/ OFF SELECTABLE

D-EFFECT FREEZE / MIRROR/ D-ZOOM / NEG. IMAGE

MOTION DET. 4 AREA

PRIVACY MASKING 8 AREA

D-ZOOM ON / OFF (X32)

SMART D-ZOOM ON / OFF (X5)

DIS ON / OFF SELECTABLE

LESN SHADING CORRECT. ON / OFF SELECTABLE

LENS TDN2.8-12MM AUTO IRIS

POWER SOURCE 12VDC / 24VAC (OPTIONAL)

POWER CONSUMPTION. 160mA @12VDC

OPERATIONAL TEMP. -10Deg. C ~ +50 Deg. C RH95% MAX.

STORAGE TEMP. -20Deg. C ~ +50 Deg. C RH95% MAX.

WEIGHT 450g

SPECIFICATION

1. HORIZONTAL 700TVL RESOLUTION

2. MECHANICAL TRUE DAY / NIGHT

3. SMART NOISE REDUCTION

4. SENSE-UP X256

5. D-WDR (WIDE DYMAIC RANGE)

6. DEFOG

7. SMART DIGITAL ZOOM

8. MOTION DETECTION & PRIVACY MASKING

9. DIS (DIGITAL IMAGE STABLIZER)

GENERAL FEATURES

USER’S MANUAL

OUTDOOR DOME CAMERA

PACKAGE CONTENTS

EXIT

LENS

● DC LENS ● MANUAL ● VIDEO

EXPOSURE

● SHUTTER ● AGC ● SENS-UP ● RETURN

WHITE BAL.

● ATW ● AWB ● AWC->SET ● MANUAL

SMART 3DNR

● VALUE ● SMART NR ● SMART LEVEL ● SENSITIVITY ● RETURN

DAY & NIGHT

● COLOR ● AUTO ● EXT ● B/W

FUNCTION

● MOTION ● PRIVACY ● D-EFFECT ● IMAGE ADJ.

● COMM ADJ. ● SYNC ● LANGUAGE ● RETURN

BACKLIGHT

● OFF ● D-WDR ● BLC ● HSBLC

F-DNR

● OFF ● AUTO ● MANUAL

OSD MENU TREE & MAIN MENU

1) LENS <DC LENS / MANUAL/VIDEO>

- Recommend Lens set as the designated camera default

DC LENS <Brightness / IRIS Speed / Return>
Brightness : 1-100 steps adjustable
Iris Speed : If necessary, control Iris speed (1-5 steps)

MANUAL <Brightness / Return>

• Push the joystick S/W to pop up OSD
Menu and set up your desired value .

OSD CONTROL

①

②

① : 2nd Video Out ② : Joystick S/W

Please make sure the following items are included in
the package

1. 1 pc of Camera with 1 pc of test lead

2. 3 pcs of mounting screws with “L” Wrench

3. 1 Pc of Manual

3) BACKLIGHT
<SHUTTER / AGC / SENS-UP / RETURN>

D- WDR : (Wide Dynamic Range) :

- To distinguish an object in both bright and dare areas

- Set desired Low & High level. 0~15 level selectable

- Return : Return the main menu.

BLC : Deliver a distinctive subject and background at the
same time, even when the subject is in backlight

- Value : Low / Middle / High selectable

- Area : Single / Double mode supported. Set the BLC
position and size.

- Default : Go back to Factory Default setting value.

HSBLC : To mask a strong light at the designated area.

- Gain : Set the desired HSBLC Gain level. (0-100 Steps)

- Mode : Set the desired mode. (Night only / All Day)

- Mask Level : Set the desired mask level. (0-100 Steps)

- Default : Go back to Factory Default setting.

- M. Skip Area : Designate an area which you want to skip.

Return

4) WHITE BAL.
<ATW / AWB / AWC-SET / MANUAL>

ATW : Auto Tracking White Balance.

- Use this mode when the color temp. is between
1,800~10,000K

AWB : Auto White Balance with the factory default value.

AWC->SET :

- To find the optimal setting for current luminance
environment in this mode. Set the point the camera
towards a sheet of white paper and press the Joystick
S/W. If the environment changes, readjust it.

MANUAL

- To fine-tune White Balance manually. Set White balance
first by using ATW or AWC mode before Manual mode.
After that , if there is still a white balance issue, switch to
manual mode and have a fine-tune. Manual mode allows
you to increase or decrease the red or blue factor.

6) SMART 3DNR <On / Off>

- To reduce the background noise in a low luminance

environment with 2D + 3D filtering system.
VALUE : Set the desired 3DNR value.

SMART NR : Set Smart NR On for the level and Sensitivity .

SMART LEVEL : Adjust Smart NR level (1-200 Steps).

SENSITIVITY : Set Smart NR sensitivity for activation.

7) F-DNR <AUTO / MANUAL/OFF>

- To defog when the video or the weather is foggy by
controlling F-DNR level.
AUTO : Set the detect level for activation.
MANUAL : Set the detect level manually by adjusting level,
Color Gain, Edge Gain, Gama value.

8) FUNCTION

8-1) MOTION :

- A signal is generated by the camera whenever motion is
detected. You can define 4 areas and control its sensitivity.

8-2) PRIVACY :
To mask area which you want to mask. 8 areas selectable

with 16 colors and controllable transparency.
8-3) D-EFFECT :

<D-Zoom/Smart D-Zoom/DIS/FREEZE/MIRROR/NEG. IMAGE>

- D-Zoom : Digital Zoom In / Out up to X32.
PAN/TILT : Set Pan/Tilt location when D-Zoom is activated.

- Smart D-Zoom : Set the zoom in /out value upto X5.
Range : Set the zoom in/out range from x2 to x5
Position : Designate the zoom area. When a movement is

detected, it automatically Zoom in/out with PIP.

Sensitivity : Set the sensitivity level for activation.

Time : Set your desired time value for display of Zoom in/out.

* Smart D-Zoom will not be activated when D-Zoom is acting.

- DIS : Digital Image Stabilizer (On/Off)
* DIS will not be activated when D-Zoom & Smart D-Zoom is on

- Freeze : To hold the image to analyze precisely.

- Mirror : Change the video direction. Mirror / V-Flip/Rotate

- Neg. Image : Negative Image (On/ Off)

8-4) IMAGE ADJUST

- Sharpness : Set the sharpness level of the picture (3-31 Steps)

- Monitor : CRT / LCD modes are provided.

- LSC : Lens Shading Correction.(On/Off)

- Defect : Activate this mode when “White Spot (Dead Pixel)” on

screen is occurred.

8-5) COMM ADJ :

- CAM TITLE : To display a title on the monitor. (On / Off)

- PROTOCOL : To define a proper protocol for communication.

- RS-485 : Set Camera ID and Baud rate.
8-6) SYNC : Set the synchronization. If the power of the camera is
AC, L/L will be provided
8-7) LANGUAGE : Set the proper language of Main Menu

5) DAY / NIGHT <COLOR / AUTO / EXT / B/W>

COLOR : Display always color picture

AUTO : Automatic D/N switching according to ambient

illumination.
Delay / D-N / N-D / Return Modes are provided.
EXT : Automatic D/N switching by using external signals.
IR LED (Photocell sensor) version must set with EXT mode.

B/W : Display always B/W picture

- IR Smart : IR Saturation Control. Set a designated value & area.

SETUP Menu Functions

2) EXPOSURE
<SHUTTER / AGC / SENS-UP / RETURN>

SHUTTER :

Adjust shutter settings : Auto / FLK / Manual / 1/50 /1/60

- AUTO mode adjust shutter speed automatically.

- FLK mode reduces on-screen flickering.

- Manual mode allows you to adjust the shutter speed
from 1/50,1/60, 1/100000 ~X2~X256.
AGC (Auto Gain Control) : Off / Low / Middle / High

- Control Gain Noise to get proper image quality.

- Set AGC Mode as High to get brighter image but more

noises of the picture.

SENS-UP : On / Off

- Automatically detect light level and maintains a clear
picture. Set a desired level upto X256.

Return

USER’S MANUAL

OUTDOOR DOME CAMERA