Hunt Electronic HLC-1NCF User Manual

User Manual

INDOOR DOME IP

CAMERA

2

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS
PRODUCT TO RAIN OR MISTURE.

DO NOT INSERT ANY METALLIC OBJECT THROUGH VENTILATION GRILLS.

CAUTION

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION：TO REDUCE THE RISK OF ELECTRIC SHOCK.

DO NOT REMOVE COVER (OR BACK).

NO USER-SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

COPYRIGHT

THE TRADEMARKS MENTIONED IN THE MANUAL ARE LEGALLY REGISTERED
TO THEIR RESPECTIVE COMPANIES.

3

Content

I. PREFACE ................................................................................................................ 4

II. PRODUCT SPECIFICATIONS ................................................................................ 4

III. PRODUCT INSTALLATION ................................................................................... 7

A. MONITOR SETTINGS ............................................................................................... 7

B. HARDWARE INSTALLATION ....................................................................................... 8

C. IP ASSIGNMENT ................................................................................................... 12

D. INSTALL ACTIVEX CONTROL ................................................................................... 16

IV. LIVE VIDEO ......................................................................................................... 23

V. CAMERA CONFIGURATION ................................................................................ 26

A. SYSTEM .............................................................................................................. 27

B. NETWORK ........................................................................................................... 32

C. A/V SETTING ....................................................................................................... 56

D. EVENT LIST ......................................................................................................... 64

VI. NETWORK CONFIGURATION ........................................................................... 74

VII. I/O CONFIGURATION ........................................................................................ 75

VIII. FACTORY DEFAULT

......................................................................................... 79

IX. UNIVERSAL PASSWORD

.................................................................................. 80

X. PACKAGE CONTENTS

........................................................................................ 83

XI. SD CARD COMPATIBILITY

................................................................................ 84

V1.2_20140106

4

I. Preface

This is a 1/3.2” CMOS sensor IP camera with a built-in web server. The user can
view real-time video via IE browser. It supports H.264, and M-JPEG video
compression, providing smooth and high video quality. The video can be stored in
a SD card and playback remotely.

With a user friendly interface, it is an easy-to-use IP camera which is designed for
security application.

II. Product Specifications

 5 Megapixel Indoor Dome
 3-Axis
 3D+2D Digital Noise Reduction
 Digital Wide Dynamic Range
 Manually Day & Night Switch time
 Built-in IR LED 15 Meter
 Power over Ethernet available
 Video output
 H.264/ M-JPEG / MPEG4 compression
 SD card backup
 iPhone/iPad/Android Supported
 SDK for Software Integration
 Free Bundle 36 ch recording software

Hardware

CPU

ARM Cortex A9

5

RAM

256MB

Flash

16MB

Image sensor

1/3.2” Megapixel CMOS sensor

Sensitivity

B / W: 0.1 Lux (AGC ON)

Lens Type

Vari-focal Lens 3-9mm@F1.8

Angle of View

27.31° ~ 75.24° (H)

19.09° ~ 54.16° (V)

ICR

Mechanism IR cut Filter (Optional)

LED

Built-in 18 IR LED
IR Distance 15M

I/O

DI / DO

Video output

Yes

3-Axis Gimbal
Adjustments Angle

Pan: 172∘
Tilt: 60∘
Rotation: 360∘

Audio

G.711(64K) and G.726(32K,24K) audio
compression
Input : External Mic In
Output: External Line Out

Power over Ethernet

Yes, PoE Class 0 (IEEE802.3af)

Power consumption

DC12V: 4.0W(IR Off), 5.5W(IR On)
PoE : 4.8W(IR Off), 6.7W(IR On)

Operating Temperature

0°C ~ 45°C

Dimensions

132mm (φ)x 108mm(H)

Weight

680g

Network

Ethernet

10/ 100 Base-T

Network Protocol

IPv6, IPv4, HTTP, HTTPS, SNMP, QoS/DSCP,
Access list, IEEE 802.1X, RTSP, TCP/ IP, UDP,
SMTP, FTP, PPPoE, DHCP, DDNS, NTP, UPnP,
3GPP, SAMBA, Bonjour

System

Video Resolution

2592x1944@15fps,
2048x1536@15fps,1920x1080@30fps,
1280x720@30fps, 640x480@30fps,

6

320x240@30fps, 176x144@30fps

Video Adjust

Brightness, Contrast, Hue, Saturation,
Sharpness, Shutter Speed adjustable, AGC,
Sense-Up, D-WDR, Flip, Mirror, Noise reduction,
Day&Night adjustable, White Balance

Triple Streaming

Yes

Image snapshot

Yes

Full screen monitoring

Yes

Privacy Mask

Yes, 3 different areas

Compression format

H.264/ M-JPEG/ MPEG4(3GPP only)

Video bitrates adjust

CBR, VBR

Motion Detection

Yes, 3 different areas

Triggered action

Mail, FTP, Save to SD card, DO, SAMBA

Pre/ Post alarm

Yes, configurable

Security

Password protection, IP address filtering, HTTPS
encrypted data transmission, 802.1X port-based
authentication for network protection

Firmware upgrade

HTTP mode, can be upgraded remotely

Simultaneous connection

Up to 10

SD card management

Recording trigger

Motion Detection, IP check, Network break down
(wire only), Schedule, DI

Video format

AVI, JPEG

Video playback

Yes

Delete files

Yes

Client System requirement

OS

Windows 7, 2000, XP, 2003, Microsoft IE 6.0 or
above, Chrome, Safari, Firefox

Mobile Support

iOS 4.3 or above, Android 1.6 or above.

Hardware Suggested

Intel Dual Core 2.8G,RAM: 4GB

*SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTIFICATION.

7

III. Product Installation

A. Monitor Settings

i. Right-Click on the desktop. Select “ Properties”

ii. Change color quality to highest (32bit).

8

B. Hardware Installation

9

1. Dome Installation Steps

a. Use screws to lock the
bottom of camera to the
ceiling or the wall.

b. Use 3-Axis to adjust the
lens angle.

c. Close the dome cover.

d. Tighten the screw on the
cover to fix it.

2. 3-Axis Diagram

Use the 3-Axis bracket to adjust the camera to appropriate angle.

10

3. Connector Instruction

The camera connectors are as below. Connect the power and the
Ethernet cable with the camera, and set it according to your network
environment.

11

4. PoE (Power Over Ethernet) (Optional) 802.3af, 15.4W PoE Switch is

recommended

Power over Ethernet (PoE) is a technology that integrates power into a
standard LAN infrastructure. It enables power to be provided to a network
device, such as an IP phone or a network camera, using the same cable as
that used for network connection. It eliminates the need for power outlets at
the camera locations and enables easier application of uninterruptible
power supplies (UPS) to ensure 24 hours a day, 7 days a week operation.

12

C. IP Assignment

i. Use the software, “IP Installer” to assign the IP address of IP CAMERA.

The software is in the attached software CD.

ii. IP installer supports two languages:

a. IPInstallerCht.exe：Chinese version
b. IPInstallerEng.exe：English version

iii. There are 3 kinds of IP configuration.

a. Fixed IP (Public IP or Virtual IP)
b. DHCP (Dynamic IP)
c. Dial-up (PPPoE)

iv. Execute IP Installer

v. For Windows XP SP2 user, it may popup the following message box.

Please click “Unblock”.

13

vi. IP Installer configuration:

vii. IP Installer will search all IP Cameras connected on LAN. The user can

click “Search Device” to search again.

viii. Click one of the IP Camera listed on the left side. The network

configuration of this IP camera will show on the right side. You may

change the “name” of the IP Camera to your preference (e.g.: Office,

warehouse). Change the parameter and click “Submit” then click “OK”. It

will apply the change and reboot the Device.

ix. Please make sure the subnet of PC IP address and IP CAM IP address

are the same.

14

The same Subnet:

IP CAM IP address: 192.168.1.200
PC IP address: 192.168.1.100

Different Subnets:

IP CAM IP address: 192.168.2.200
PC IP address: 192.168.1.100

To Change the PC IP address:

Control PanelNetwork ConnectionsLocal Area Connection
PropertiesInternet Protocol (TCP/IP) Properties

Please to make sure your IP Camera and PC have the same Subnet. If not,
please change IP Camera subnet or PC IP subnet accordingly.

x. A quick way to access remote monitoring is to left-click the mouse twice

on a selected IP Camera listed on “Device list” of IP Installer. An IE

browser will be opened.

15

xi. Then, please key in the default “user name: admin” and “password:

admin”.

16

D. Install ActiveX control

1. For users of IE 6.0 or above:

For the first time to view the camera video via IE, it will ask you to install the
ActiveX component.

1. If the installation failed, please check the security setting for the IE browser.

i. IE  Tools  Internet Options…  Security Tab  Custom Level… 

Security Settings  Download unsigned ActiveX controls Select
“Enable” or Prompt.

ii. IE  Tools  Internet Options…  Security Tab  Custom Level…

Initialize and script ActiveX controls not marked as safe  Select
“Enable” or Prompt.

17

1

2

3

4

18

5

When popup the following dialogue box, click “Yes”.

2. You can choose another way:

Go to: IE→Tools → Internet Options… → Security Tab → Trusted sites → Add the

IP address and click "OK".

In the site list you can key one single IP address or a LAN address. For example,
if you add "192.168.21.*", all the IP address under .21 LAN will be regarded as
trusted sites.

19

2. To Non-IE Web Browser Users

If you use Firefox or Google chrome to access the IP camera but fail to watch
the live video, please follow the steps to install necessary tools:
(The following pictures are based on chrome.)

a. You may see the prompt message as the picture below. First, click the
link:

"Firstly, please install Microsoft Visual C++ 2010 Redistributable Package
(x86)."

The link conducts you to the Microsoft official site where you can download the
tools. Please select the language and click "download".

20

In the pop-up window, please tick the first and the third file as the picture below.
Click "Next" to download both "Microsoft .NET Framework 4 Client Profile (Web
Installer)" and "Microsoft Visual C++ 2010 Redistributable Package (x64)".

After finishing downloading, execute the two files respectively to install them.
The windows may ask you to reboot the PC when the installation is finished.

b. Then, click the second link "Please click here to download the
installation program which does not support IE browser." to download
Setup ActiveX.

21

After finishing the downloading, execute the files to install ActiveX. Then restart
the browser.

c. If you execute the steps above but still cannot see the live video
normally, please try the following solution:

Search for the file "np_hoem_x.dll" in your system disk. For Windows XP users,
please go to "Start" → "Search" → Search for "All files and folders" and key-in
"np_hoem_x.dll". For Windows 7 users, please use the search bar on the
top-right of the Windows Explorer.

Delete all the files named "np_hoem_x.dll". They're the ActiveX control tools
installed in your computer, but the old version of ActiveX might not compatible
with the new version of browser. Therefore, they need to be deleted in order to

22

install the latest ActiveX control.

Start your web browser, and repeat the step 2-b: "Download the installation
program which does not support IE browser" to download and install ActiveX.

23

IV. Live Video

Start an IE browser, type the IP address of the IP camera in the address field. It will
show the following dialogue box. Key-in the user name and password. The default
user name and password are “admin” and “admin”.

When the IP Camera is connected successfully, it shows th e following program
interface.

24

1. Get into the administration page.

2. Video Snapshot.

3. Show the system time, video resolution, and video refreshing rate.

4. Adjust image: 1/2x, 1x, 2x.

5. Selects the video streaming source: If the streaming 2 is closed, this
function will not be displayed.

6. Tick on “Chatting” for enabling two-way audio.

7. Shows how many people are connected to this IP camera.

8. Control the relay output connected to this camera.

Double-clicking on the video will change the view to full screen mode. Press “Esc”
or double-click the video again for changing back to normal mode.

Right-Click the mouse on the video, it will show a pop-up menu.

I. Snapshot: Save a JPEG picture

25

II. Record Start: Record the video in the local PC. It will ask where to save the

video. To stop recording, right-click again. Select “Record Stop”.

The video format is AVI. Use Microsoft Media Player to play the recorded file.

III. Mute: Turn-off the audio. Click again to turn on it.

IV. Full Screen: Full-screen mode.

V. Zoom: Enable the zoom-in and zoom-out functions. First, select “Enable

digital zoom” option within the pop-up dialogue box and then drag and drop
the bar to adjust the zoom factors.

VI. Frame Buffm Sec: This function is to build a temporary buffm to accumulate

several video frames. This function can make video smooth-going when the
Network speed is slow and lag. If you select “100”, then it plays video 100
mSec after receiving images from camera. The slower the Network is the
bigger value should be selected. The available values are: NULL, 100, 200,
300, 400, and 500. The default value is null.

26

V. Camera Configuration

Click to get into the administration page. Click to go back to the live
video page.