Hunature HN BN02 User Manual

Bluetooth LE module (HN-BN02) User Manual

Items

Specification

Function

Radio frequency module. Bluetooth® standard Ver 4.1 Low Energy
conformity

Application

Beacon, Dimmer, Sensor, Remote controller

Structure

Hybrid IC loaded with silicon monolithic semiconductor
Compatible with industrial standard reflow profile for Pb-free solders
Can meet with RoHS compliance (Pb, Cd, Hg, Cr+6, PBB, PBDE)

Size

19 x 15.5 x 2.2 mm

Input voltage

DC 3.3 V

Frequency
range

2402 ~ 2480 MHz

1. Product Information

This product is a BLE module sold by HUNATURE. It provides setting function
according to user's purpose and can build various network according to the setting. It
is possible to control individual or group by connecting to various devices, and it is
possible to build low power control system through connection with sensor.

2. Description of operation

The BLE transceiver module receives a setup command from the user through a
wired connection with a PC or a dedicated application for the purpose of using the
product. This determines the operation mode of the module and receives the control
command from the external terminal. As a terminal for module control, a smart
device supporting BLE interface can be used, and this product can also be used as a
terminal by user setting.

3. Product Specification

4. Warranty and AS information

Warranty Year
If the product does not work, please ask for A / S on the contact below.
Brand Name: Hunature co.,ltd.
Address: 9-22, Pangyo-ro 255beon-gil, Bundang-gu, Seongnam-si,
Gyeonggi-do, Korea A Hall 903 (Woorim W-City)
Tel: [phone]
Product name: BLE module
Model number: HN-BN02

Manufacturer / Country of Origin: Hunature co.,ltd. / Korea

Bluetooth LE module (HN-BN02) User Manual

4. Warranty and AS information

FCC REQUIREMENTS PART 15
Caution: Any changes or modifications in construction of this device which are not expressly
approved by the responsible for compliance could void the user's authority to operate the
equipment.
NOTE: This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions;

1. This device may not cause harmful interface, and

2. This device must accept any interference received, including interference that may cause
undesired operation.
This equipment has been tested and found to comply with the limits for a Class B Digital
Device,
pursuant to Part 15 of the FCC Rules. These limits are designed to this equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the radio or television off and on, the user is encouraged to try to
correct interference by one or more of the following measures.

1. Reorient or relocate the receiving antenna.

2. Increase the separation between the equipment and receiver.

3. Connect the equipment into an outlet on another circuit.

4. Consult the dealer or an experienced radio/TV technician for help.

The module is limited to OEM installation ONLY.

OEM integrators are responsible for ensuring that the end-user has no manual instructions to
remove or install module.

This module is intended for OEM integrator. The OEM integrator is responsible for the
compliance to all the rules that apply to the product into which this certified RF module is
integrated. Additional testing and certification may be necessary when multiple modules are
used.

In the users manual of the end product, the end user has to be informed to keep at least 20 cm
separation with the antenna while this end product is installed and operated. The end user has
to be informed that the FCC radio-frequency exposure guidelines for an uncontrolled
environment can be satisfied.

The end user has to also be informed that any changes or modifications not expressly
approved by manufacturer could void the user’s authority to operate this equipment.

If the labelling area is small than the palm of the hand, then additional FCC part 15.19
statement is required to be available in the users manual: This device complies wirh Part 15
of FCC rules.