EN
H-123RGB
Notice
Please read this user´s manual carefully before installation to get the cooler´s best performance by optimized
installation. NOX xtreme is not responsible for any damage to the product or injury caused by incorrect installation or
user´s carelessness. The cooler may cause an interference with few motherboards and if you face an interference
between Hummer cooler and your motherboard, please stop installing the cooler. Be sure to be careful not to hurt
yourself by the sharp fins while installating & disassembling the cooler. Do not move the cooler around after the
installation to prevent CPU damage. Please, do not use the cooler for any other usage apart from the original purpose.
Warranty
For your warranty claims, please contact Nox Xtreme overseas distribution partners in your country. Find the
distribution partner list at where listed at www.nox-xtreme.com
Warranty: 2 years from purchasing date. (Depending on the laws of each country)
URL: www.nox-xtreme.com
E-mail: support@nox-xtreme.com
Components description
1) Cooler x 1
2 3
1
4 5
2) Black pin x 4
3) White pin x 4
4) Mounting ring x 1
5) Thermal paste x 1
Intel LGA 1151 / 1150 / 1156 / 1155 / 775 / 1200 installation
Put the white pin into the
bracket, and install the
bracket onto the
motherboard, insert
black pin to lock the
bracket.
Apply the thermal paste
on CPU
1) Hook the clip onto
the tap of the
mounting bracket
1
2) Press down the other
side of the metal clip
and hook onto the tab
2 3
3)Verify the installation
was correct
AMD FM2+ / FM2 / FM1 / AM4 / AM3+ / AM3 / AM2+ / AM2 installation
Apply the thermal paste
on CPU
1) Hook the clip onto
the tap of the
mounting bracket
2) Press down the other
side of the metal clip
and hook onto the tab
2 31
3)Verify the installation
was correct
Fan power cable
Connect fan’s 4 pin
PWM cable to
“CPU_FAN” header
on the motherboard.
Connect the 4pin
RGB header to the
motherboard
12V_G_R_B header.
- Download RGB Sync software
that is compatible with your
motherboard.