HUMIDEW GO-2016 (PP) User Manual

PAGE 1
Humidew
GO-2016 (PP) User Manual
Please read this user manual carefully before using.
Table of contents:
Operating instructions………………………………………Page 2 Care & Maintenance………………………………...……….Page 3
Troubleshooting……………………………………..………Page 4
Technical Specifications…………………………………...Page 5 Safety Notices………………………………………………..Page 6
humidew.com
PAGE 2
Press Power Button
Indicator light
Mist Level
First press
Red
Low
Second Press
Green
Medium
Third Press
Blue
High
Press Lightly
Indicator light (flash)
Timer
First Press
Green
4 hours
Second Press
Blue
6 hours
Third Press
Red
Back to the preset time: 2 hours
For safety purposes, you should read the instructions carefully before using the appliance for the first time. Save the instructions for future reference. The appliance is designed for domestic use and may only be operated in accordance with these instructions for use.
Operating Instructions
1. Place humidifier on a flat surface.
2. Detach the tank and hold it upside down. Turn to open tank cap and add clean water into the tank. Replace the cap and close it tightly. Attach the tank back to the base properly (it can operate for over 6 hours when the tank is full of water).
3. Connect to the power supply (100-240V 50/60Hz). Press power button, once the indicator light is on the humidifier starts to operate.
4. To adjust mist level: Press the power button to adjust the mist output level. The indicator light will change colors depending on which level is selected.
Press power button for the fourth time to shut down humidifier.
5. Setting the timer: Under low, medium or high mist level, press power button for 3 seconds to
enter time mode (red indicator light flashes, timer is preset as 2 hours). In this mode, press button lightly to adjust timer
Press power button for 3 seconds again, timer is cancelled.
6. When water tank is out of water, humidifier will shut down automatically for
Loading...
+ 4 hidden pages