Human Touch PC600 Use & Care Manual

ENG FRC ESN

use & care manual

Perfect Chair

PC-LiVE with 3D EasePoint™ Technology,

Jade Heat and Memory Foam PLUS

mode d’emploi et d’entretien

manual de uso y cuidado

humantouch.com

800.355.2762

No medical claims are warranted or implied by the use of this product.

Human Touch is a trademark of Human Touch®, LLC.

PC-LIVE-NA-A1

www.humantouch.com/register

use & care manual

www.humantouch.com/register

ENGLISH

For more than 35 years, Human Touch has established itself as an industry leader that is changing the lives of its customers with products and services that help them feel,

perform, and live their best. Developed in cooperation with the medical community and

industry experts, we deliver products that blend patented technology, craftsmanship and intelligent ergonomics with superior design to enable therapeutic relief for everyone.

Our industry leading massage chairs, Perfect Chair® recliners and evolving set of innovative solutions share attributes in their ease-of-use, attention to performance and quality, and design to adapt to most any lifestyle. These attributes are highly valued by our customers and garner broad industry award and recognition. As a result, Human Touch empowers people to enjoy greater health and vitality in their professions, pursuits and everyday lives. And with a population increasingly aware of the benefits of wellness, Human Touch extends its brand leadership and available solutions for the benefit of everyone.

humantouch.com

Perfect Chair

PC-LiVE with 3D EasePoint™ Technology,

Jade Heat and Memory Foam PLUS

welcome to human touch

Your PC-LiVE chair is packed with features designed to cradle your body in comfort—not only in the traditional zero-gravity position—but in the position you sit most.

Our research shows that Perfect Chair® owners spend most of their time in the position we call “LiVE” position – backrest partially reclined, footrest partially raised—watching TV, reading, and so on. So, we’ve designed the PC-LiVE chair for maximum comfort in that position.

Key to PC-LiVE’s unsurpassed comfort is our patented 3D EasePoint technology, which uses medical-grade mineral oil pods to evenly distribute your weight across the chair seat at all times, eliminating uncomfortable pressure points.

Questions? Contact Human Touch Customer Experience at 800-355-2762.

humantouch.com

By adding the healing properties of far-infrared heat into your Perfect Chair PC-LiVE, we’ve integrated the earth’s natural elements and healing arts of the Far East into an amazingly luxurious chair that soothes tired, aching muscles, elevating the body to a new state of comfort and relaxation. We’ve also incorporated luxurious high-density plush seating with premium, responsive Memory Foam PLUS that maximizes ultimate comfort and provides ideal support while it contours your entire body. With PC-LiVE, the next evolution of the Perfect Chair is here.

The PC-LiVE pad set with Jade Heat System and Memory Foam PLUS is

compatible with Perfect Chair® bases for the PC-420 and PC-610 only.

keep it safe

ENGLISH

IMPORTANT SAFETY INSTRUCTIONS

When using an electrical appliance, basic precautions should always be followed, including the following:

READ ALL INSTRUCTIONS BEFORE USING THIS APPLIANCE.

DANGER: TO REDUCE THE RISK OF ELECTRICAL SHOCK

ALWAYS UNPLUG THIS PRODUCT FROM THE ELECTRICAL OUTLET IMMEDIATELY AFTER USING AND BEFORE CLEANING.

WARNING: TO REDUCE THE RISK OF BURNS, ELECTRIC SHOCK, AND FIRE,

THIS PRODUCT MUST BE USED IN ACCORDANCE WITH THE FOLLOWING INSTRUCTIONS:

• DO NOT PUT HANDS OR FINGERS NEAR THE FOOTREST MECHANISM ON THE UNDERSIDE OF THE CHAIR WHILE THIS PRODUCT IS RUNNING. TOUCHING THE MECHANISM CAN RESULT IN INJURY.

• IF THE SUPPLY CORD IS DAMAGED, IT MUST BE REPLACED BY THE MANUFACTURER OR ITS SERVICE AGENT OR A SIMILARLY QUALIFIED PERSON IN ORDER TO AVOID A HAZARD.

• AN APPLIANCE SHOULD NEVER BE LEFT UNATTENDED WHEN PLUGGED IN. UNPLUG FROM OUTLET WHEN NOT IN USE, AND BEFORE PUTTING ON OR TAKING OFF PARTS.

• CLOSE SUPERVISION IS NECESSARY WHEN THIS PRODUCT IS USED BY, ON, OR NEAR CHILDREN, INVALIDS, OR DISABLED PERSONS. KEEP CHILDREN AWAY FROM EXTENDED FOOT SUPPORT (OR OTHER SIMILAR PARTS).

• USE THIS PRODUCT ONLY FOR ITS INTENDED USE AS DESCRIBED IN THIS MANUAL. DO NOT USE ATTACHMENTS NOT RECOMMENDED BY THE MANUFACTURER.

• NEVER OPERATE THIS PRODUCT IF IT HAS A DAMAGED CORD OR PLUG, IF IT IS NOT WORKING PROPERLY, IF IT HAS BEEN DROPPED OR DAMAGED, OR DROPPED INTO WATER. RETURN THIS PRODUCT TO A SERVICE CENTER FOR EXAMINATION AND REPAIR.

• DO NOT CARRY THIS APPLIANCE BY SUPPLY CORD OR USE CORD AS A HANDLE.

• ALWAYS KEEP THE POWER CORD AWAY FROM HEATED SURFACES.

• NEVER OPERATE THIS PRODUCT WITH THE AIR OPENINGS BLOCKED. KEEP THE AIR OPENINGS FREE OF LINT, HAIR, AND THE LIKE.

• NEVER DROP OR INSERT ANY OBJECT INTO ANY OPENING.

• DO NOT USE OUTDOORS.

• DO NOT OPERATE WHERE AEROSOL (SPRAY) PRODUCTS ARE BEING USED OR WHERE OXYGEN IS BEING ADMINISTERED.

• DO NOT USE THIS PRODUCT WHEN STANDING ON A DAMP FLOOR, OR WHEN ANY PART OF THE BODY IS IN CONTACT WITH PLUMBING OR ANY SIMILAR GROUND.

• DO NOT USE THIS PRODUCT IF NOISE ABOVE NORMAL SOUND IS HEARD.

• DO NOT STAND ON OR IN APPLIANCE. USE ONLY WHILE SEATED.

• THIS APPLIANCE IS NOT INTENDED FOR USE BY PERSONS (INCLUDING CHILDREN) WITH REDUCED PHYSICAL, SENSORY OR MENTAL CAPABILITIES, OR LACK OF EXPERIENCE AND KNOWLEDGE, UNLESS THEY HAVE BEEN GIVEN SUPERVISION OR INSTRUCTION CONCERNING USE OF THE APPLIANCE BY A PERSON RESPONSIBLE FOR THEIR SAFETY. CHILDREN SHOULD BE SUPERVISED TO ENSURE THAT THEY DO NOT PLAY WITH THE APPLIANCE.

• DO NOT USE WHILE SLEEPING.

• DO NOT USE ON AN INFANT.

• THIS PAD IS NOT TO BE USED BY OR ON AN INVALID, SLEEPING OR UNCONSCIOUS PERSON, OR A PERSON WITH POOR BLOOD CIRCULATION UNLESS CAREFULLY ATTENDED.

• DO NOT USE ON AREAS OF INSENSITIVE SKIN.

• BURNS CAN OCCUR REGARDLESS OF CONTROL SETTING; CHECK SKIN UNDER PAD FREQUENTLY.

• NEVER USE PAD WITHOUT COVER IN PLACE.

• DO NOT USE PINS OR OTHER METALLIC MEANS TO FASTEN THIS PAD IN PLACE.

• DO NOT SIT ON OR CRUSH PAD – AVOID SHARP FOLDS.

• NEVER PULL THIS PAD BY THE SUPPLY CORD.

• DO NOT USE THE CORD AS A HANDLE.

• IT IS NOT NECESSARY TO OPEN THE COVER TO EXAMINE THE PAD BEFORE EACH USE.

• LOOP CORD LOOSELY WHEN STORING, TIGHT WRAPPING MAY DAMAGE CORD AND INTERNAL PARTS.

• READ AND FOLLOW ALL INSTRUCTIONS ON BOX OR PACKED WITH PAD BEFORE USING.

• THE HEATING PAD MUST NOT BE LAUNDERED.

SAFETY PRECAUTIONS

• COMFORTABLE CLOTHING IS RECOMMENDED WHILE USING THIS PRODUCT.

• IF YOU FEEL ANY ABNORMAL DISCOMFORT DURING THE OPERATION OF THIS PRODUCT, TURN OFF THE POWER IMMEDIATELY AND DO NOT USE THE PRODUCT. CONSULT YOUR PHYSICIAN.

• DO NOT PULL ON THE AC CORD.

• WHEN USING THIS PRODUCT AFTER IT HAS BEEN IN STORAGE, CHECK TO SEE THAT THE PRODUCT IS OPERATING PROPERLY PRIOR TO USE.

• ALWAYS CONFIRM THAT THERE ARE NO OBSTACLES BEHIND THE PRODUCT AND THAT THERE IS SUFFICIENT SPACE TO RECLINE.

DO NOT ATTEMPT TO REPAIR THIS PRODUCT YOURSELF.

• THIS PRODUCT IS DESIGNED FOR PERSONAL IN-HOME USE. COMMERCIAL USE WILL VOID WARRANTY.

• THIS HEATING PAD HAS A POLARIZED PLUG (ONE BLADE IS WIDER THAN THE OTHER) AS A SAFETY FEATURE. THIS PLUG WILL FIT INTO A POLARIZED OUTLET ONLY ONE WAY. IF THE PLUG DOES NOT FIT FULLY INTO THE OUTLET, REVERSE THE PLUG. IF IT STILL DOES NOT FIT, CONTACT A QUALIFIED ELECTRICIAN. DO NOT ATTEMPT TO DEFEAT THIS SAFETY FEATURE.

SAVE THESE INSTRUCTIONS

humantouch.com

get ready

UNPACK THE BOXES

PARTS BOX

Your PC-LiVE pad set requires some assembly. Just follow a few simple steps to

install the Jade Heat System power and controls then attach the pads to the chair. Before you know it you’ll be settled into soothing comfort.

3. Using a Phillips-head screwdriver, secure the power hub to the chair with the cord facing upward, using the four provided screws (Fig.3).

4. Leaving approximately two feet of the chair power cord, coil the excess cord neatly (Fig.4).

5. Open the pocket on the bottom of the chair canvas, then tuck the coiled cord into the lower pocket (Fig.4).

Power hub

ENGLISH

Head pad

Body pad with 3D

EasePoint Technology,

Jade Heat and Memory

Foam PLUS

Phillips-head

screwdriver

Head pillow

Arm cap (2)

Screw (6)

Jade heat panel

Transformer

INSTALL THE POWER HUB.

1. Gently turn the chair onto its left-hand side (Fig.1).

2. Locate the four screw holes on the bottom of the front cross bar (Fig.2).

Power hub

Connector box

Screw / Washer

Coiled

power cord

Fig.3

6. Plug the chair power cord into the power hub (Fig.5).

7. Plug the transformer into the power hub outlet (Fig.5).

8. Feed the transformer plug up through the hole in the chair canvas (Fig.6).

9. Gently return the chair to the upright position.

Chair power cord

Transformer

Transformer plug

Fig.4

Transformer plug

humantouch.com

Fig.1

Front cross bar

Fig.5

Fig.6

SLIDE THE BODY PAD ONTO THE CHAIR FRAME.

Slide the body pad onto the lower part of the chair frame, making sure that the frame slides into the fabric pocket located on the

Fig.2

bottom side of the pad. Fold the upper part of the pad forward onto the seat.

INSTALL THE CONTROL PANEL AND CONNECT THE JADE HEAT PAD.

1. Feed the transformer plug up through the hole in the chair canvas (Fig.7).

2. Connect the transformer cable to both the control panel cable and the jade heat pad cable (the connections are color-coded), install the connector cover over the connections, then tuck the cables into the seat canvas (Fig.8).

Control panel

5. Place the left-hand armrest cap into position, then secure it using the three screws (Fig.10).

ENGLISH

6. Using a Phillips-head screwdriver, remove the screw that secures the glide rail safety tip. Discard this screw (Fig.11).

7. Place the cable loop into position over the screw hole, place the provided washer over the cable loop, then secure the assembly using the provided screw (Fig.11).

8. Repeat step 5 to install the right-hand armrest cap.

9. Plug the Jade Heat cord into a wall outlet.

Screw

Transformer plug

Fig.7

Control panel cable

Connector box

Transformer cable

Jade heat pad cable

Transformer cable (Red)

Jade heat pad cable (Yellow)

Fig.8

Backrest pad

Connector box cover

Connector box

Armrest cap

Fig.10

SECURE THE BODY PAD.

Washer

Cable loop

Glide rail safety tip

Fig.11

3. Remove the three screws taped to the underside of the left-hand armrest cap.

4. Place the control panel bracket on top of the left-hand armrest core (Fig.9).

Center mounting bracket

between screw holes

Fig.9

humantouch.com

Smooth the body pad into place, from the footrest toward the backrest. The pad is automatically secured using the hook and loop fasteners.

SLIDE THE HEAD SOCK OVER THE HEADREST FRAME.

Slide the head sock over the headrest frame, as far as it will go. The padded side of the head sock should face the back of the chair.

ENGLISH

SLIDE THE HEAD PAD OVER THE HEADREST FRAME.

Slide the head pad over the headrest frame, ensuring that the frame slides into the fabric pocket located on the bottom side of the pad. Pull the head pad down as far as it will go.

TUCK IN THE BODY PAD FLAP.

From the front of the chair, tuck the flap on the top of the body pad up into the head pad and smooth it flat. The flap is automatically secured to the pad, using the hook and loop fasteners.

ATTACH THE HEAD PILLOW.

care and maintenance

To keep your product working and looking its best, please follow these simple care guidelines.

WARNING:

1. Be sure to disconnect the power cord from the electrical outlet before cleaning.

2. When cleaning the controller or power switch, use a dry cloth only. Never use a damp cloth to clean the controller or power switch.

3. Be sure to test any cleaning solution on a small, inconspicuous part of the product to ensure that the color does not fade prior to using the solution on the entire product surface.

4. Do not use benzene, thinner or any other solvents on your product.

Cleaning Code Standard: W

To maintain your Human Touch product in optimum condition, dust it frequently and/or vacuum it with a soft brush vacuum extension. SofSuede® products can also be brushed with a suede brush. If your product becomes dirty, use a water-based upholstery cleaner only. To treat stains, spot clean with an upholstery shampoo or a mild detergent foam.

Natural leather is a breathing, porous material similar to human skin, and is susceptible to changing color due to absorbing dirt, sweat, moisture, greases, and oils. Care should be taken to avoid or minimize contact with bare skin and hair, as well as food items, as this may cause discoloring, especially on lighter leather colors. Some immunity to discoloring and protection from cracking and drying may be achieved by periodically rubbing the entire leather surface with beeswax, saddle-soap, or natural leather conditioner from a reputable supplier (follow application instructions carefully).

Attach the head pillow straps to the head pad straps using the hook and loop fasteners. Adjust the head pillow height for maximum comfort.

USING YOUR JADE HEAT SYSTEM.

Press the heat button to toggle through low, medium, high, and off.

The Jade Stones radiate far-infrared rays that deliver healing warmth up to three inches deep into muscle tissue. Once the deep penetrating heat reaches the optimal temperature, the desired level of warmth is maintained.

NOTE: The Jade Heat system automatically powers off after two hours of no use.

Low Medium High

Maintenance and Repair:

1. The mechanics of this product are specially designed and constructed to be maintenance free. No periodic lubrication or servicing is required.

2. Your chair should only be serviced by an authorized service center.

Use and Storage Environment:

1. When not in use for a long period of time, we recommend that the chair be covered, the power cord be coiled and that the unit be placed in an environment free of dust and moisture.

2. Do not store near heat or open flame.

3. Do not leave this product exposed to direct sunlight for long periods of time. This may cause fading or damage.

4. Do not use or store in extreme temperatures; product stored in cold temperatures may require 48 hours at room temperature to function properly.

5. Product should be used and stored in an environment with non-condensing humidity ranging from 10 to 80%; excessive humidity will damage the mechanics.

Speciﬁcations*

Operating Voltage: 125 VAC 60HZ. 20 Watts

*Specifications are subject to change without prior notice.

humantouch.com

+ 12 hidden pages

Human Touch PC600 Use & Care Manual

Specifications and Main Features

Frequently Asked Questions

User Manual