Human Touch PC-075-085-095 User Manual
June 5, 2009
*PC-085 shown
REPLACING THE FOOTREST ROD
PC075/085/095
Tools Required: 4 mm (5/32") Allen Key (provided), 10-mm wrench
SAVE ALL REMOVED PARTS FOR USE DURING REASSEMBLY
Footrest rod assembled
GET READY
1. Gently tip the chair on its back (Fig.1).
REMOVING THE FOOTREST ROD
SERVICE LEVEL: 2
(Fig.1)
1. Using a 10-mm wrench, turn the metal footrest rod nut
counter-clockwise to detach the rod from the spacer barrel,
then remove the rod from the chair frame.
2. Using the 4 mm (5/32") Allen Key (provided), remove the screw
from the top of the black plastic spacer barrel to detach the
spacer barrel from the bracket (Fig.2).
(Fig.2)
Spacer barrel
Footrest rod
1
INSTALLING THE NEW FOOTREST ROD
1. Remove the screw from the top of the black plastic spacer barrel (Fig.3).
Screw
2. Align the spacer barrel with the corresponding hole on the bracket, then secure it using the screw
you removed in the previous step and the 4 mm (5/32") Allen Key (Fig.4).
3. From below the chair frame, insert the metal rod through the corresponding hole in the chair
frame then into the black spacer barrel (Fig.4).
4. Turn the metal rod clockwise by hand to secure it, then tighten it using a 10-mm wrench.
Bracket
Spacer barrel
Footrest rod
Please send any questions or comments regarding these instructions to: documentation@humantouch.com
© 2009 Human Touch™, LLC.
(Fig.4)
(Fig.3)
2
Loading...