Human Touch HT-100, HT-102, HT-104, HT-410, HT-430 Owner's Manual

REMOVING THE MASSAGER

.

and calf massager).

out of the

drops down, away

from the foot and

REPLACING THE FOOT AND CALF MASSAGER

May-04-2009

Tools Required:

To ensure that Human Touch

products are repaired in a manner that is fully consistent with the practices used during the manufac turing process, Human Touch requires that all

cover, then disconnect the

backrest to

the wire casing.

bracket screw counter-clockwise just enough to break the torque (approximately 1/4 turn).

the brackets.

pin head and the bracket then using the screwdriver as leverage to push the pin head away from the

bracket (Fig.6).