HumanCentric XT, 101-3001, 101-3002 Online Manual
XT-Series Monitor Mount
Models 101-3001 (single), 101-3002 (dual)
Patented in the US, International Patents Pending
TECHNICAL SPECIFICATIONS
Lift Angle Pivot Swivel Pan Tilt Extension Vertical
Single
Arm
Dual
Arm
N/A
160 mm
6.3 in
PARTS INCLUDED
SINGLE ARM
Base and pole
DUAL ARM
0
100
0
100
Clamp Padding
360
360
0
0
0
360
0
360
Lower Arm
240
240
0
0
Upper Arm
105
105
0 - 540 mm 0 - 270mm
0
0 - 21 in 0 - 10.5 in
0 - 540 mm 0 - 270 mm
0
0 - 21 in 0 - 10.5 in
Monitor Bracket
Max Weight
Load
9 kg
19.8 lbs
9 kg per arm
19.8 lbs per arm
Monitor Screws (4)
Dual arm socket
Base and pole
Clamp Padding
Lower Arms (2)
Upper Arms (2)
Monitor Brackets (2)
with clip
TOOLS INCLUDED
M6
M6 Large Allen Wrench
M3 Small Allen Wrench
M3
COMPATIBLE WITH MODELS
Fits VESA patterns 100mm x 100mm and 75mm x 75mm. If your monitor doesn’t have VESA holes, check
www.humancentric.com for an appropriate adapter for your model.
© 2017 HumanCentric Ventures LLC
Monitor Screws (8)
www.humancentric.com
1
1. INSTALL BASE
CLAMP OPTION
Place the clamp
padding between
the desk and the
intended clamp
location. For
optional permanent
placement, remove
the adhesive
backing.
Desk Thickness: 20 - 110 mm (0.8 - 4.3 in)
GROMMET OPTION
Disassemble clamp
base as shown.
2. INSTALL LOWER ARMS
DUAL MOUNT
Place the clamp
padding between the
desk and the intended
clamp location. For
optional permanent
placement, remove the
adhesive backing.
Desk Thickness: 20 - 60 mm (0.8 - 2.35 in)
Hole Diameter: 10-60 mm (0.4 - 2.35 in)
click!
Install and tighten
the adjustable clamp
as shown. Insert the
M3 allen wrench into
the wrench slot.
© 2017 HumanCentric Ventures LLC
SINGLE MOUNT
click!
www.humancentric.com
2
Loading...