human care Carl-Oskar, Staffan RA, Carl-Oskar RA, Rebel, Rebel RA Accessory Manual
...
Accessory manual
Carl-Oskar, Rebel, Carl-Oskar RA, Staffan RA, Rebel RA,
Carl-Oskar TW/gåbord, Staffan TW/gåbord, Rebel TW/
gåbord, Svea TW/gåbord.
2
www.humancaregroup.com
Content
ENGLISH
Accessory overview 3
Assembly Tray 4
Assembly Slow Down Brake 4
Assembly cane holder 5
Assembly One Hand Brake 6
Assembly Back Support 7
Assembly Curb Climber 8
Assembly Splash Guard 9
Assembly Oxygen Holder 9
Assembly Basket 11
SVENSKA
Tillbehörsöversikt 12
Montering bricka 13
Montering släpbroms 13
Montering käpphållare 14
Montering enhandsbroms 15
Montering ryggband 16
Montering steghjälp 17
Montering stänkskydd 18
Montering Syrgashållare 18
Montering korg 20
www.humancaregroup.com
3
Accessory Manual (ENG)
Carl-Oskar, Rebel, Carl-Oskar RA, Staffan RA, Rebel RA, Carl-Oskar TW, Staffan
TW, Rebel TW, Svea TW.
Accessory overview
Image
Description Part no
Tray
Practical for
resting light
weight items.
C-O & Rebel:
57 cm: 10651,
62cm, 67cm and
72cm: 10602
C-O RA/TW,
Rebel RA/TW:
10602
Staffan RA/TW,
Svea TW:
Not avaliable
Slow down
brake
Prevents
the rollator
from moving
too fast and
enables a
controlled
walking speed
for the user.
C-O & Rebel:
10620
C-O RA/TW,
Rebel RA/TW:
10620
Staffan RA/TW,
Svea TW:
Not avaliable
Cane
holder
Simplifies the
transportation
of a cane.
C-O & Rebel, C-O
RA/TW, Rebel
RA/T W:
10603
Staffan RA/TW:
40603
Svea TW:
Not avaliable
One-hand
brake
Allows the
user to
control brake
functions with
one hand.
C-O & Rebel, C-O
RA/TW, Rebel
RA/T W:
10652
C-O RA/TW,
Rebel RA/TW,
Svea TW: 10653
Staffan RA/TW:
10653 (low) 10654
(high)
Image
Description Part no
Backrest
Supports the
back while
resting.
C-O and Rebel:
57 cm, 62cm and 67
cm models: 10621.
Part no. for 72cm
model: 10655
All other models:
Not avaliable
Curb
climber
Helps raise the
rollator onto a
curb.
C-O & Rebel, C-O
RA/TW, Rebel
RA/TW, Svea TW:
10612
Staffan RA/TW:
Not avaliable
Splash
guard
Protects legs
and clothes.
Sold in pairs.
C-O, C-O RA/TW:
10608
All other models:
Not avaliable
Oxygen
holder
Holds oxygen
tube
firmly in place.
C-O & Rebel, C-O
RA/TW, Rebel
RA/T W: 10615
Staffan RA/TW:
40605
Svea TW:
Not avaliable
Basket
with
handle
Basket ideal
for shopping.
C-O & Rebel, C-O
RA/TW, Rebel
RA/T W:
10601
Staffan RA/TW:
40601
Svea TW:
Not avaliable
4
www.humancaregroup.com
Assembly Tray
Carl-Oskar, Rebel, C-O RA/TW, Rebel RA/TW
Assemble the tray on to the seat of the rollator
as according to picture. Remove the tray from
the seat by pulling in the back of the tray.
For the RA/TW models the tray is only suitable
for the models with a seat.
maximum weight: 5 kg
ENG
Assembly Slow Down Brake
ENG
Place the two parts of the slow down brake
above the rear fork (see picture 1).
Preassemble the slow down brake with the
screws and the locking nuts.
Adjust by heightening or lowering so that the
wear washer on the tyre brake can move easily
without the slow down brake coming in its way.
The slow down brakes wheel shall also be in the
center of the rollators tyre.
Tighten the screws and assure that the slow
down brake is hardly tightened.
Adjustment of slow down brake (picture 2)
Tighten the knob until preferred pressure is
attained (the harder pressure the more inert
rolling of the rollator).
Lock the knob by tightening the nut.
Picture 1
Picture 1
www.humancaregroup.com
5
Assembly cane holder
ENG
Assembling upper part.
The cane holder is delivered in two main parts, an
upper and a lower. These are in turn composed of
two parts, verify that you have received them.
1. Open the clamp about that much it can be lead
over the handle pipe.
2. Before closing the clamp, take the attachment
and lead the pliers of the clamp through the
hole of the attachment. Attend on turning it in
preferred position.
3. Close the clamp and tighten the screw. Note!
Make sure that the attachment is secured.
Assembling lower part.
1. Open the clamp about that much it can be lead
over the handle pipe.
2. Before closing the clamp, take the cup and
lead the pliers of the clamp through the hole of
the attachment. Attend on turning it in preferred
position.
3. Close the clamp and tighten the screw. Note!
Make sure that the cup is secured.
6
www.humancaregroup.com
Assembly One Hand Brake
ENG
The one-hand brake allows the user to brake the
walking-aid with one hand.
The single hand brake can be assembled
afterwards or be ordered as preassembled.
When ordering a preassemled single hand brake,
please state on which side the handle brake
should be placed.
Disassembling
1. Disassemble the wires from the wheels on
both sides of the rollator. Disassemble the end
cover (1) from the holder (5) and remove the
wires and wire housings from the rollator.
2. Remove the brake lever (2) on the side which
shall not be used as one-hand brake.
Assembling
1. Attach the two adapters (6) in the end cover
back (7).
2. Assemble the belonging wires and wire
housings and attach the end cover back. Pull
the wires around the roll (3) and secure it with
the brake handle pin (4) to the brake lever.
Attach the brake lever to the holder.
3. Assemble the wires to the wheels on each side.
The shorter wire housing shall be assembled
on the same side as the one-hand brake.
4. Adjust the brake with the adjustment screw for
increased / decreased braking action.
1
2
4
3
5
7
6
Assembly Back Support
ENG
The back support comes with the following parts:
A: Holder (2st)
B: Holder (2st)
C: Screw M4x14 (4st)
D: Screw M4x20 (4st)
E: Nut M4 (8st)
F: Back strap (1st)
A
B
C
D
F
E
Loading...