human care Leia Maintenance Manual

Leia
Maintenance Manual/Servicemanual/Manuel de maintenance/Onderhoudshandleiding/ Wartungshandbuch
22
Content
Maintenance Manual Leia (ENG) 3
Maintenance, inspection and test 3 Exploded view and spare parts 4
Servicemanual Leia (SV) 6
Underhåll, inspektion och test 6 Sprängskiss och reservdelar 7
Manuel de maintenance de Leia (FR) 9
Maintenance, inspection et test 9 Vue éclatée et pièces de rechange 10
Onderhoudshandleiding Leia (NL) 12
Onderhoud, controle en test 12 Exploded view en reserveonderdelen 13
Wartungshandbuch Leia (DEU) 15
Wartung, Inspektion und Test 15 Explosionsansicht und Ersatzteile 16
3
Maintenance Manual Leia (ENG)
To ensure that your walking aid is functioning properly and safely, an annual inspection should be done only by an authorized agent. The following maintenance should be done regularly:
Cleaning
When cleaning the walker it is
recommended machine washing, 60 degrees for 10 minutes. When using a pressure washer, do not wash directly to the bearings. In addition to machine washing, regular cleaning with a mild cleanser is recommended.
Note! Do NOT use thinner, petrol or other solvents.
Post treatment After washing, all connections, tight
spaces and drainage holes should be blown dry and sprayed with thin oil. If degreaser is used, the moving parts should be lubricated.
The Paint Control damages to the paint.
Pipe frame Control weldings and screw attaches. If
the corrosion is extensive the rollator should be replaced.
Handle Must be fixed. Make sure the handle
profiles can be pushed down to the chassis. Change the grip if needed.
Brakes Control that both brakes and parking
brakes are working. Wires should be intact.
Height adjustment Control function.
CE-marking Make sure that the CE-marking is still
there and readable.
Reflectors Make sure the reflectors are still there
and visible.
Wheels Make sure the wheels are not worn-
out and are spinning easily without any noise.
Front forks
Make sure that the ball bearing is firmly attached and that the forks swings easily. The front fork inertia can be adjusted by tightening or untightening the locking nut.
Folding mechanism Control function
Seat Make sure the seat remains in place and
the screws secure and that the seat pad is properly mounted.
Maintenance, inspection and test
ENG
44
Maintenance, inspection and test
ENG
Stability Control that all wheels are steadily on
the ground and that there are no chassis distortion.
Test driving Make a final control by test driving.
Note!
Recondition must be done by a person who has good knowledge about how the job should be performed. An incorrect performed recondition could result an
accident/incident. Always contact your retailer.
When exchanging parts of the rollator, use only Human Care parts to ensure continued CE-validation.
If the corrosion is more than a film of rust the rollator shall be discarded and return for recycling.
Intended use
The rollator should only be used as support whilst walking or as seating whilst stationary. Do not alter the rollator yourself.
Exploded view and spare parts
ENG
1
8
5
7
4
11
3
6
12
10
2
9
5
Exploded view and spare parts
ENG
No Designaon Qty Art. No Other informaon
1 Handle tube complete
High grey/white right side
High grey/white le side
High blue right side
High blue le side
Low grey/white right side
Low grey/white le side
Low blue right side
Low blue le side
Medium grey/white right side
Medium grey/white le side
Medium blue right side
Medium blue le side
1
89883 89884 89885 89886 89887 89888 89889 89890 89891 89892 89893 89894
Grey/white resp. blue refer to the color of the rollator.
High, medium resp. low refers to the seat height of the rollator.
2 Front fork kit 1 89882
3 Wheel kit 1 89880
4 Brake kit 1 89881
5 Lower brake wire
High Medium Low
1
71027 89776 89801
High, medium resp. low refers to the seat height of the rollator.
6 Grip 1 89724
7 Brake housing
Brake housing right
Brake housing le
1
89895 89896
8 Brake handle
Grey/white right side
Grey/white le side
Blue right side
Blue le side
1
89672 89656 89761 89738
Grey/white resp. blue refer to the color of the rollator.
9 Height adjustment lever kit
Grey/white height adjustment lever Blue height adjustment lever
1
89897 89898
Grey/white resp. blue refer to the color of the rollator.
10 Seat pad 1 90271
11 Seat handle kit
Grey/white Blue
1
90273 90272
Grey/white resp. blue refer to the color of the rollator.
12 Rear fork kit
Le side
Right side
1
90274 90275
Incl. brake pad and locking nut
Note: use locte
6
Servicemanual Leia (SV)
För att säkerställa att ditt gånghjälpmedel fungerar korrekt och säkert ska ett behörigt ombud genomföra en årlig inspektion. Följande underhåll ska utföras regelbundet:
Rengöring
Vid rengöring av rollatorn
rekommenderas maskintvätt i 60 grader i 10 minuter. Vid användning av en högtryckstvätt ska den inte riktas direkt mot lagren. Utöver maskintvätt rekommenderas regelbunden rengöring med ett milt rengöringsmedel.
Obs! Använd INTE förtunningsmedel, bensin eller andra lösningsmedel.
Efterbehandling Efter tvätt ska alla anslutningar, trånga
utrymmen och dräneringshål torkas med hårtork och sprayas med tunn olja. Om avfettningsmedel används ska de rörliga delarna smörjas.
Lacken Kontrollera om det finns lackskador.
Rörram Kontrollera svetsfogar och att skruvar
är åtdragna. Om det förekommer omfattande korrosion ska rollatorn bytas ut.
Handtag Måste vara fastsatt. Kontrollera att
handtagsstången kan tryckas ned mot chassit. Byt ut handtagsgreppet vid behov.
Bromsar Kontrollera att både bromsar och
parkeringsbromsar fungerar. Kablarna ska vara hela.
Höjdjustering Kontrollera funktionen.
CE-märkning Kontrollera att CE-märkningen finns kvar
och går att läsa.
Reflexer Kontrollera att reflexerna finns kvar och
är synliga.
Hjul Kontrollera att hjulen inte är utslitna och
snurrar lätt utan att avge ljud.
Framgafflar Kontrollera att kullagret sitter ordentligt
fast och att gafflarna lätt kan svängas. Tröghet i framgaffeln kan justeras genom att låsmuttern dras åt eller lossas.
Hopfällningsmekanism Kontrollera funktionen
Sits Kontrollera att sitsen sitter på plats, att
skruvarna är åtdragna och sitsdynan är ordentligt monterad.
Underhåll, inspektion och test
SV
Loading...
+ 12 hidden pages