Huizhou Qiaoxing Famous Science and Technology HZJGSM6031 User Manual
CF 6031 USER MANUAL
Front view
Picture is for reference only, it depends the phone you have.
Keys introduction
Keys
Function description
1.Main menu Press to go into the main menu in standby mode
Press it to access the sub-menu in non-standby mode or
execute the function indicated at the right bottom of
the display.
2.▲/▼/◄/►In standby mode,, ▲/▼ shortcut to calendar/alarm
；
◄/►shortcut to message edit/profile.
In edit interface, it’s the cursor moving up, down, left
and right
3.Dial key
Make a call or answer an incoming call.
In standby mode, press this key to enter Dialed calls list.
1
4.Back/delete Press to enter contacts in standby mode.
Press to perform the function indicated at the right
bottom of the screen in non-standby mode.
Long press POWER key for on/off.
5.Power
on/off, End key Press to go back to the standby mode in any menu
6.1~9Numeric To input numbers and characters
Keys
7.MP3
In standby mode, press this key to enter MP3 player. # is
player,0 is pause,* is stop
8.OK
In standby mode, press to enter contacts menu. In
specific menu, press to execute function chosen, in
most of the case, same function as the OK button on
left bottom.
In certain menu, only this OK button works, details as
below:
8.1 voice mail server, press OK to dial
8.2
broadcast
message→option→settings→select
language, press OK to select.
8.3 application→alarm, press OK to set the alarm
ON/OFF
9.SMS
In standby state, press this button directly to message
menu
10.Call log
Shortcut to call log.
In the stand-by state, press this button to show the call
menu.
11.Mute
In the talking state, press this button to suspend talking
12.Hands-free Activate hands-free operation.
In the standby mode, press this button to make a call or
answer a call.
Press to end the conversation dialed by hands-free
button
13.M1-M5
You can assign the contact numbers as speed dial from
2
2.
Antenna Connector
3
M1 to M5, so that in standby mode, when pressing
these buttons (M1 to M5), the numbers pre-defined
can be dialed out directly.
*#Press to switch among *, + in standby mode for dialing
No
Press to enter symbol in edit interface.
Long press to switch to silent mode in standby mode.
Press to switch input mode.
Interface icon
Icon
Explaination
Signal strength indicator
Battery life
Adapter connected
SMS
Instruction before use
2.1 Connectors on the Phone
1.
USB Port for connecting USB cable to the power adaptor or the
PC
3. Battery jack
4. SIM card Slot
5. Flash Card Slot
6. RJ9 handset cord Jack
2.2 Assemble battery
4
Caution: the adapter must be pull out and phone be off before battery
assembly, and pay attention to the battery positive and negative side .
2.3 Assemble the cord line
2.4 Assemble the antenna
5
Charging the battery by
adapter
When the battery is fixed to the phone according to 2.2, put one end
of the adapter to AC-Adapter Jack.
During charging, screen shows the battery charging icon, when the
battery is full, the charging icon will stop rolling.
Install SIM card
Always switch the phone off before removing or inserting SIM card.
Open the bottom cover of the battery. Remove the battery; slide the
SIM card into the SIM card slot. Make sure that the contact area of
the card is facing down, and the beveled corner matches with the SIM
card slot. Put in the battery and install the bottom cover.
Install SD card
Always switch the phone off before removing or inserting SD card.
Open the bottom cover of the battery. Remove the battery; open the
SD card slot and put the SD card into the slot, and then cover the slot.
Make sure that the contact area of the card is facing down, and the
beveled corner matches with the SIM card slot. Put in the battery and
install the bottom cover.
SD card is mainly for MP3. Please store the music into the SD card only.
The system disk “RE504” does not have extra room for music but only
the files for internet connection.
Operation
3.1 Making calls
6
Loading...