HUIZHOU GAOSHENGDA TECHNOLOGY WT38M2001 User Manual

PRODUCTS USERMANUAL

WT38M2001T

Product Features

Product Descripti o n

Complies with IEEE 802.11g;

Product Specification

Model

WT38M2001T

Product Name

WIFI+BT Module

Standard

802.11b/g/n /a

Interface

/

Data Transfer Rate

1,2,5.5,6,11,12,18,22,24,30,36,48,54,60,9

Modulation Method

QPSK , BPSK , CCK(802.11b)

Frequency Band

2.4GHz: CH 1~CH13 for FCC

5470~5725MHz,5725~5850MHz

Transmit Power

< 18dBm

Operation Mode

Ad hoc, Infrastructure

Operation Range

Up to 300 meters in open space

OS Support

Windows XP 32/64,2000,Windows 7,Vista
Security

WEP, TKIP, AES, WPA, WPA2

Operating Voltage

5V±10%

Operating

-10 ~ 70°C ambient temperature

Storage Tempera tur e

-55 ~ 125°C ambient temperature

Humidity

5 to 90 % maximum (non-condensing)

WIFI+BT Module
IEEE

802.11b/g/n/a

2T/2R

Model Number:

WT38M2001T

The WT38M2001T is a high-gain and low power consumption wifi module . It fully complies
with IEEE 802.11n and IEEE 802.11b/g/a feature rich wireless connectivity at high
standards,delivers reliable,cost-effective,throughput from an extended distance.When

3.3V, USB bus and GND were connected,This module is working. The Bluetooth part supports

latest 4.2+HS operation.

◆

802.11b; 802.11n ; 802.11a standard
for 2.4GHz and5GHz Wireless LAN.

◆TWO Transmit and TWO Receive
path(2T2R)

◆Supports Ad-Hoc/Infrastructure modes

◆ Works with all existing network

nfrastructure.

◆Capable of up to 128-Bit WEP
Encryption.

◆Freedom to roam while staying
connected.

◆ UP to 300 Mbps High-Speed Trans fer

Rate in 802.11n mode of operati on.

◆ Operating System s ：Windows XP
32/64,2000,Windows 7,V ista
32/64,Linux,Macintosh

◆ Low power consumption.

◆ Easy to install and c onfigure.

Bluetooth v4.2 Low Energy(LE);

◆

◆Bluetooth specification v2.1+EDR;

0,120 and maximum of 300Mbps

QPSK , BPSK , 16QAM ,64QAM with OFDM
(802.11g)
BPSK , QPSK , 16QAM ,64QAM with
OFDM(802.11n)
QPSK , BPSK , 16QAM ,64QAM with OFDM
(802.11a)

5GHz: 5150~5250MHz, 5250~5350MHz

32/64,Linux,Macintosh

Temperature

PAGE 1 OF 4

Version 1.0

PRODUCTS USERMANUAL

WT38M2001T

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

- Consult the dealer or an experienced radio/TV technician for help.

Caution:Any changes or modifications not expressly approved by the party responsible for compliance could void the user's
authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device
may not cause harmful interference, and (2) this device must accept any interference received, including interference that
may cause undesired operation.

Radiation Exp osu re Statemen t

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment
should be installed and operated with minimum distance 20cm between the radiator and your body.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Country Code selection feature to be disabled for products marketed to the US/Canada.
This device is intended only for OEM integrators under the following conditions:

1. The antenna must be installed such that 20 cm is maintained between the antenna and users, and

2. The transmitter module may not be co-located with any other transmitter or antenna,

As long as the three conditions above are met, further transmitter testing will not be required. However, the OEM integrator
is still responsible for testing their end-product for any additional compliance requirements required with this module
installed.

Important Note:

In the event that these conditions cannot be met (for example certain laptop configurations or co-location with another
transmitter), then the FCC authorization is no longer considered valid and the FCC ID cannot be used on the final product.
In these circumstances, the OEM integrator will be responsible for re-evaluating the end product (including the transmitter)
and obtaining a separate FCC authorization.

End Product Labeling

This transmitter module is authorized only for use in device where the antenna may be installed such that 20 cm may be
maintained between the antenna and users. The final end product must be labeled in a visible area with the following:
Contains FCC ID:

Manual Information to the End User

The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF
module in the user’s manual of the end product which integrates this module.
The end user manual shall include all required regulatory information/warning as show in this manual.

Industry Canada

This device complies with Industry Canada’s license-exempt RSSs. Operation is subject to the following two conditions:

- This device may not cause interference; and

- This device must accep t any interfer ence, includi ng interferen ce that ma y cause undesired o peratio n

of the device.

Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence.
L’exploitation est autorisée aux deux conditions suivantes:

- l’appareil ne doit pas produire de brouillage;

- l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est

susceptible d’en compromettre le fonctionnement.

2AC23-WT38M2001.

PAGE 2 OF 4

Version 1.0