HUIZHOU GAOSHENGDA TECHNOLOGY WT22M Users manual

Hui Zhou Gaoshengda Technology Co. , LTD WT22M2600N

Model

WIF+BT Module

Product Name

WT22M2600N

Standard

802.11 b/g/n

Interface

USB

Data Transfer Rate

1,2,5.5,6,11,12,18,22,24,30,36,48,54,60,90 and maximum of 300Mbps

Modulation Method

GFSK,π/4-DQPSK,8DPSK(bluetooth)

Frequency Band

BLUETOOTH

2.4G: 2412~2462 MHz

Operation Mode

Infrastructure

Security

WEP, TKIP, AES, WPA, WPA2

Operating Voltage

3.3V±10%

Current Consumption

1000mA

Antenna Type

WIFI:PCB BT:PIFA

Operating

0 ~ 60°C ambient tem pe rat ur e
Storage Tempera tur e

-40 ~ 80°C ambient temperature

Humidity

5 to 95 % maximum (non-condensing)

Complies with IEEE 802.11b/g/n for 2.4GHz.

◆ High speed USB 2.0 interface

WIFI+BT Module
IEEE 802.11 b/g/n 2T/2R
Model Number: WT22M2600N

Product Descrition

The WT22M2600N is a 2.4GHz WIFI 2×2 MIMO module. This modu le pr ovides a high level of integration with a
dual-stream IEEE 802.11n MAC/ base band /radio and Bluetooth 5.0.The WLAN operation supports 20MHz,40MHz
channels for data rates up to 300Mbps. It fully complies with IEEE 802.11 b/g/n feature rich wireless connectivity
at high standar ds,delivers reliable ,cost-effective, throughput from an extended distance.

Product Features

◆

◆ Bluetooth v5.0

◆ Two transmit and Two receive path(2T2R)

◆ Works with all existing network nfrastructure.

◆ Capable of up to 128-Bit WEP Encryption.

◆ Freedom to roam while staying conn ected.

◆ UP to 300 Mbps High-Speed Trans fer Rate in 802.11n mode of oper a tion.

◆ Operating System s ：Linux,Win7, Win8, Win10,XP

◆ Low power consu mption.

◆ Easy to install an d configu re.

Product S pecification

DQPSK,DBPSK,CCK(802.11b)
QPSK,BPSK,16QAM,64QAM with OFDM (802.11g)
QPSK,BPSK,16QAM,64QAM with OFDM (802.11n)

2402~2480 MHz
WIFI

＜

Temperature

PAGE 1 OF 3

Version 1.0

Hui Zhou Gaoshengda Technology Co. , LTD WT22M2600N

device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable

However, there is no guarantee that interference will not occur in a particular installation.

NOTICE:

◆please keep this product and accessories attached to the places which children can't touch;

◆do not splash water or other liquid onto this product, otherwise it may cause damage;

◆do not put this product near the heat source or direct sunlight, otherwise it may cause
deformation

◆or malfunction;

◆please keep this product away from flammable or naked flame;

◆please do not repair this product by yourself. Only qualified personnel can be repaired.

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital

protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.

If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.

-Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause
undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.

Please notice that if the FCC identification number is not visible when the module is
installed inside another device, then the outside of the device into which the module is
installed must also display a label referring to the enclosed module. This exterior label
can use wording such as the following: “Contains FCC ID:2AC23-WT22M” any similar wording
that expresses the same meaning may be used.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with a minimum distance of
20cm between the radiator & your body. This transmitter must not be co-located or operating
in conjunction with any other antenna or transmitter.

PAGE 2 OF 3

Version 1.0