HUIZHOU GAOSHENGDA TECHNOLOGY WL6E User Manual

Hui Zhou Gaoshengda Technology Co., LTD WL6ER1510

WIFI Module
IEEE 802.11 b/g/n 1T/1R
Model Number: WL6ER1510

Product Descrition

The WL6ER1510 is a 2.4GHz WIFI 1T1R module. This module operation supports 20MHz,40MHz channels for data
rates up to 150Mbps. It fully complies with IEEE 802.11 b/g/n/ feature rich wireless connectivity at high
standards,delivers reliable,cost-effective, throughput from an extended distance.

Product Features

◆ Complies with IEEE 802.11b/g/n for 2.4GHz Wireless LAN.

◆ One transmit and One receive path(1T1R)

◆ Works with all existing network nfrastructure.

◆ Capable of up to 128-Bit WEP Encryption.

◆ Freedom to roam while staying connected.

◆ UP to 150 Mbps Transfer Rate in 802.11n mode of operation.

◆ Operating Systems：Linux,Win7, Win8, Win10, XP

◆ Low power consumption.

Easy to install and configure.

◆

High speed USB 2.0 interface

◆

ROHS compliant

◆

Product Specification

Model

WIFI Module

Product Name WL6ER1510
Standard 802.11 b/g/n
Interface UART
Data Transfer Rate 1,2,5.5,6,11,12,18,22,24,30,36,48,54,60,90 and maximum of 150Mbps
Modulation Method DQPSK,DBPSK,CCK(802.11b)

Frequency Band 2412~2462 MHz
Operation Mode Infrastructure

Security WEP, TKIP, AES, WPA, WPA2
Operating Voltage 5V±10%
Current Consumption ＜1000mA
Antenna Type PCB
Operating

Temperature
Storage Temperature -40 ~ 80°C ambient temperature

Humidity 5 to 95 % maximum (non-condensing)

QPSK,BPSK,16QAM,64QAM with OFDM (802.11g)
QPSK,BPSK,16QAM,64QAM with OFDM (802.11n)

0 ~ 60°C ambient temperature

NOTICE:

◆please keep this product and accessories attached to the places which children can't touch;

◆do not splash water or other liquid onto this product, otherwise it may cause damage;

◆do not put this product near the heat source or direct sunlight, otherwise it may cause
deformation

◆or malfunction;

◆please keep this product away from flammable or naked flame;

◆please do not repair this product by yourself. Only qualified personnel can be repaired.

PAGE 1 OF 2

Version 1.0

Hui Zhou Gaoshengda Technology Co., LTD WL6ER1510

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.

-Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled
environment.
This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause
undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.

Please notice that if the FCC identification number is not visible when the module is
installed inside another device, then the outside of the device into which the module is
installed must also display a label referring to the enclosed module. This exterior label
can use wording such as the following: “Contains FCC ID:2AC23-WL6E” any similar wording
that expresses the same meaning may be used.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with a minimum distance of
20cm between the radiator & your body. This transmitter must not be co-located or operating
in conjunction with any other antenna or transmitter.

The module is limited to OEM installation ONLY.
The OEM integrator is responsible for ensuring that the end-user has no manual instruction
to remove or install module.
The module is limited to installation in mobile or fixed application.
A separate approval is required for all other operating configurations, including portable
configurations with respect to Part 2.1093 and difference antenna configurations.
There is requirement that the grantee provide guidance to the host manufacturer for
compliance with Part 15B requirements.

PAGE 2 OF 2

Version 1.0