HUIZHOU GAOSHENGDA TECHNOLOGY W7Z User Manual

Hui Zhou Gaoshengda Technology Co., LTD W7ZM1100
Version 1.0
Product Name
WIFI Module
Model
W7ZM1100
Standard
802.11 b/g/n
Interface
USB
Data Transfer Rate
1,2,5.5,6,11,12,18,22,24,30,36,48,54,60,90 and maximum of 300Mbps
Modulation Method
DQPSK,DBPSK,CCK(802.11b)
Frequency Band
2412~2462 MHz
Operation Mode
Infrastructure
Security
WEP, TKIP, AES, WPA, WPA2
Operating Voltage
3.3V±10%
Current Consumption
1000mA
Antenna Type
PIFA
Operating
0 ~ 60°C ambient temperature Storage Temperature
-40 ~ 80°C ambient temperature
Humidity
5 to 95 % maximum (non-condensing)
Product Features
Product Description
Complies with IEEE 802.11b/g/n for 2.4GHz Wireless LAN.
Product Specification
WIFI Module IEEE 802.11 b/g/n
Model Number:
W7ZM1100
1T/1R
The W7ZM1100 is a 2.4GHz WIFI 1×1 module. The WLAN operation supports 20MHz,40MHz channels for data rates up to 150Mbps. It fully complies with IEEE 802.11 b/g/n feature rich wireless connectivity at high standards,delivers reliable,cost-effective, throughput from an extended distance.
One transmit and One receive path(1T1R)
Works with all existing network nfrastructure.
Capable of up to 128-Bit WEP Encryption.
Freedom to roam while staying connected.
UP to 150Mbps High-Speed Transfer Rate in 802.11n mode of operation.
Operating SystemsAndroid,Linux,Win7,XP
Low power consumption.
Easy to in sta ll a n d config ure.
High speed USB 2.0 interface
RO H S co m p lia n t
QPSK,BPSK,16QAM,64QAM with OFDM (802.11g) QPSK,BPSK,16QAM,64QAM with OFDM (802.11n)
Temperature
PAGE 1 OF 3
Hui Zhou Gaoshengda Technology Co., LTD W7ZM1100
Version 1.0
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Caution: The user is cautioned that changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.
If power exceeds the limit and the distanceOver 20cm distance in actual use between the device and useris compliant with the requirement
FCC RF Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and any part of your body .
The device
The intended use is generally not for the general public.It is generally for industry/commercial use. The connector is within the transmitter enclosure and can only be accessed by disassembly of the transmitter that is not
normally required. the user has no access to the connector. Installation must be controlled. Installation requires special training
must be professionally installed
Canada Statement
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device.
L'émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d'Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes :
1)L'appareil ne doit pas produire de brouillage;
2)L'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.
PAGE 2 OF 3
+ 2 hidden pages