HUIZHOU GAOSHENGDA TECHNOLOGY W2Y User Manual

PRODUCT SPECIFICATION
WIFI Module
Version 1.0
Custom Name
Department
Approval
拟制
DESIGN
Model Number: W2YM2510
(MT7603UN)
Custom Approval Section
Date
审核
CHECK
批准
APPROVAL
李茂松 马毅 陈宇科
18/10/23 2018/10/23 2018/10/23
20
惠 州 高 盛 达 科 技 有 限 公 司
HUIZHOU GAOSHENGDA TECHNOLOGY CO., LTD
中国惠州
HUA YU RD., NO.75, ZHONGKAI HIGH-TECH DEVELOPMENT AREA, HUIZHOU, CHINA
TEL:(0752)2096628 E-mail: lims@gaosd.com
仲恺高新技术开发区华宇路 75
PRODUCTS SPECIFICATION
Document revision history
Revision Date Approved by Remarks
Version 1.0 2018-10-23 Draft
W2YM2510
PAGE 2 OF 10
Version
1.0
PRODUCTS SPECIFICATION
1. General Description
W2YM2510
W2YM2510 is
Module. This Card is based on
to specify the product requirements for
MTK MT7603UN chipset that complied with
802.11b/g/n USB
IEEE 802.11n,and it is also backward complied with IEEE 802.11b/g standard from 2.4~2.5GHz.It can be used to provide up to 54Mbps for IEEE 802.11g, 11Mbps for IEEE 802.11b and 300Mbps for IEEE 802.11n to connect your wireless LAN.
With seamless roaming, fully interoperability and advanced security with WEP standard, 802.11b/g/n USB Module offers absolute interoperability with different vendors 802.11b/g/n Access Points through the wireless LAN.
2. Features
Compatible with IEEE 802.11b standard to provide wireless 11Mbps data rate.
Compatible with IEEE 802.11g standard to provide wireless 54Mbps data rate.
Compatible with IEEE 802.11n standard to provide wireless 300Mbps data rate.
Operation at 2.4~2.5GHz frequency band to meet worldwide regulations
Supports WEP,802.1x,WPA and WPA2 enhanced security
Friendly user configuration and diagnostic utilities
Drivers support Windows 2000,Windows 7 and XP, Linux , Android
  High speed USB 2.0 interface
ROHS compliant
PAGE 3 OF 10
Version
1.0
PRODUCTS SPECIFICATION
Frequency
3. Application Diagrams
3.1 General Requirements
3.1.1 IEEE 802.11b Section
3.2.1.1
3.2.1.2
3.2.1.3
3.2.1.4
3.2.1.5
3.2.1.6
3.2.1.7
Feature
Standard ● IEEE 802.11b Radio and Modulation Schemes Operating
Channel Numbers ● 13 channels for Worldwide Data Rate ● at most 11Mbps Media Access
Protocol
Transmitter Output Power at Antenna Connector
Detailed Description
● DQPSK , DBPSK and CCK with DSSS
● 2400 2483.5MHz ISM band
● CSMA/CA with ACK
● Typical RF Output Power at each RF chain, and
at room Temp 25
● 17±2 dBm at 11Mbps
W2YM2510
3.2.1.8
Receiver Sensitivity at Antenna
Connector
● Typical Sensitivity at each RF chain. @Frame (1000-byte PDUs)
Error Rate<8% at room Temp 25
● -83 dBm for 11Mbps
PAGE 4 OF 10
Version
1.0
PRODUCTS SPECIFICATION
● IEEE 802.11g
Modulation Type
Frequency
3.1.2 IEEE 802.11g Section
3.2.2.1
3.2.2.2
3.2.2.3
3.2.2.4
3.2.2.5
3.2.2.6
3.2.2.7
3.2.2.8
3.1.3 IEEE 802.11n Section
3.2.3.1 Standard
3.2.3.2
3.2.3.3
3.2.3.4 Data Rate ● at most 300 Mbps
3.2.3.5
3.2.3.6
Feature
Standard Radio and
Operating
Channel Numbers ● 13 channels for Worldwide Data Rate ● at most 54Mbps Media Access Protocol Transmitter Output Power at Antenna Connector Receiver Sensitivity at Antenna
Connector
Feature
Radio and Modulation Type
Operating Frequency
Media Access Protocol
Transmitter Output Power at Antenna Connector
Detailed Description
● QPSK , BPSK , 16QAM ,64QAM with OFDM
● 2400 2483.5MHz ISM band
● CSMA/CA with ACK
● Typical RF Output Power at each RF chain,
at room Temp. 25
13±2 dBm at 54Mbps
● Typical Sensitivity at each RF chain. @Frame (1000-byte PDUs)
Error Rate<10% at room Temp 25
● -71 dBm at 54Mbps
Detailed Description
IEEE 802.11n
BPSK , QPSK , 16QAM ,64QAM with OFDM
● 2400 ~ 2483.5MHz for ISM band
● CSMA/CA with ACK
● Typical RF Output Power at each RF chain, and at room Temp.
25
● 2.4GHz Band/HT20
● 15±2dBm at MCS7
W2YM2510
● 2.4GHz Band/HT40
● 13±2dBm at MCS7
3.2.3.7
Receiver Sensitivity at Antenna Connector
Typical Sensitivity at each RF chain. @Frame(1000-byte PDUs)Error Rate=10% and at room Temp. 25
● 2.4GHz Band/HT20
● -68dBm at MCS7
PAGE 5 OF 10
● 2.4GHz Band/HT40
● -66dBm at MCS7
Version
1.0
Loading...
+ 9 hidden pages