Hui yu Technology WB 004 User Manual

FRONT BACK

100mm

Thanks for purchasing a Wireless Charger!
Please read this manual before use and follow the
instructions.

Packing contains:

1*Wireless Charger

1*Micro USB cable

1*User Manual

Features:

Comply with QI Wireless Charging Standard.

Charger uses Red light and blue light indicators to indicate
current setting

Overheat, voltage excess, and FOD protection.

Specifications: Components Introductions

Mirco USB Input Spec

Flashing Blue light

Flashing blue light

Working Temperature

Working Humidity

5V 2A

Output Spec

5W (max)

Red light On

Standby mode

Phone is fully charged (note:Not all phone support this function)

Blue light On

Charging

Protection Mode

Working Tem:23 to 104(F)Storage temps-4 to 140(F)

Working Humidity10-90%RH,Storage Humidity5-90%RH

Material

Rohs approved

MICRO-USB

Detailed Instructions

Please use Micro USB cable to connect the charger and
adapter( The adapter should be 5V/2A .

When the power is ON, the blue and red lights will flash
alternately, when the red light in ON, the charger enters
standby mode.

When the phone is placed on the carger horizontally,
the blue light is in breathing lamp state, when the phone
is full of power, the blue light is always on!

The regular(normal) charging requires 5V/2A adapter.

Warning

Do not connect this charger to PC or laptop usb port

Do not use 5V/1A adapter.

Remove any metal/Metallic items or decorations from the
back of the device

100%9:41 AM

Remove all metal items from charging surface

Remove device from charger if devices begins to overheat

When placed horizontally, please place the center of the
device in the center of the charger.

This device compplies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:

1. This device may not cause harmful interference

2. This device must accept any interference received,
including interference that may cause undesired operation.

Notice:
Changes or modifications made to this equipment not

100%9:41 AM

expressly approved by (manufacturer name)may void the
FCC authorization to operate this equipment.

Trouble Shooting

If the red and blue lights flash simultaneously,
check for overload protection or extra metallic material.

Check if the power outlet or adapter are working.

Check the adapter.

Check the charging cable.

Unplug and plug the charging cable again.

Check if the phone is QI wireless charging standard
compatible.

Remove the phone’s case and try again.

128mm

FCC STATEMENT :

This device complies with Part 15 of the FCC Rules. Operation is subject to the following

two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may

cause undesired operation.

Warning: Changes or modifications not expressly approved by the party responsible for

compliance could void the user's authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B

digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation. This

equipment generates uses and can radiate radio frequency energy and, if not installed

and used in accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off and on, the

user is encouraged to try to correct the interference by one or more of the following

measures:

Reorient or relocate the receiving an　 tenna.

Increase the separation between the equipment and receiver.　

Connect the equipment into an outlet on a circuit different from that to which the 　

receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.　

FCC Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated
with minimum distance 20cm between the radiator & your body.