Huisen Furniture BH16-084-599-02-ESPRESSO, BH16-084-599-04-WEATHERED, BH16-084-599-06-BLACK, BH17-084-098-96-GRAY, BH16-084-599-05-BIRCH User Manual
...
CUBE ORGANIZER DESK
VENDOR STOCK NUMBERS
BH16-084-599-02-ESPRESSO BH16-084-599-06-BLACK
BH16-084-599-03-WHITE BH17-084-098-22-RUSTIC GRAY
BH16-084-599-04-WEATHERED BH17-084-098-96-GRAY
BH16-084-599-05 BIRCH
DO NOT RETURN THE PRODUCT TO THE
STORE.
INDIVIDUAL STORES DO NOT STOCK
PARTS.
FOR MISSING OR DAMAGED PARTS CALL
1-800-729-1569.
PARTS WILL BE SHIPPED FREE OF CHARGE.
FOR PROMPT, RELIABLE SERVICE, PLEASE
HAVE YOUR ASSEMBLY MANUAL READY.
LOT NUMBER______________
DATE OF PURCHASE___/___/___
RECOMMENDED NUMBER OF PEOPLE FOR ASSEMBLY : 2
ESTIMATED ASSEMBLY TIME: 1 HOUR
16 STEPS TO COMPLETE
• CALL OUR TOLL FREE NUMBER 1-800-729-1569 FOR FURTHER ASSISTANCE.
• THIS INSTRUCTION BOOK CONTAINS IMPORTANT SAFETY INFORMATION.
• PLEASE READ IT AND KEEP FOR FUTURE REFERENCE.
• DO NOT ALLOW CHILDREN TO CLIMB OR PLAY ON THE UNIT.
• CLEAN THE PRODUCT WITH YOUR FAVORITE FURNITURE POLISH AND A SOFT CLOTH.
• DO NOT USE HARSH CHEMICALS OR ABRASIVE CLEANERS.
• MOVE YOUR NEW FURNITURE CAREFULLY WITH TWO PEOPLE. NEVER PUSH OR DRAG THE UNIT.
Huisen Furniture (Longnan) Co., Ltd.
Designed in the USA |Made in China
We are available to assist you Monday - Friday from 9:00 am - 5:00 pm
Eastern Standard Time. 800-729-1569 |USA only.
1
21
CUBE ORGANIZER DESK
VENDOR STOCK NUMBERS
BH16-084-599-02-ESPRESSO BH16-084-599-06-BLACK
BH16-084-599-03-WHITE BH17-084-098-22-RUSTIC GRAY
BH16-084-599-04-WEATHERED BH17-084-098-96-GRAY
BH16-084-599-05 BIRCH
BEFORE STARTING
• Read and understand all the steps carefully before
starting. If each step is not followed in the correct
order the assembly will be difcult and may result in
damages.
• Work in a spacious area, preferably on a carpeted
surface, near where the unit will be used.
• Make sure all the parts are included. Most boards are
labeled with a removable sticker.
Helpful hints
TOOLS NEEDED TO ASSEMBLE
hammer
at head
screw driver
philips head
screw driver
• Call our toll free number if you need assistance. We are
available to assist you Monday - Friday from 9:00 am 5:00 pm Eastern Standard Time.
• 800-729-1569 USA only.
Huisen Furniture (Longnan) Co., Ltd.
Designed in the USA |Made in China
We are available to assist you Monday - Friday from 9:00 am - 5:00 pm
Eastern Standard Time. 800-729-1569 |USA only.
DO NOT USE POWER TOOLS TO ASSEMBLE YOUR
FURNITURE. POWER TOOLS MAY DAMAGE THE
PARTS AND RESULT IN DAMAGE.
2
21
CUBE ORGANIZER DESK
VENDOR STOCK NUMBERS
BH16-084-599-02-ESPRESSO BH16-084-599-06-BLACK
BH16-084-599-03-WHITE BH17-084-098-22-RUSTIC GRAY
BH16-084-599-04-WEATHERED BH17-084-098-96-GRAY
BH16-084-599-05 BIRCH
Huisen Furniture (Longnan) Co., Ltd.
Designed in the USA |Made in China
We are available to assist you Monday - Friday from 9:00 am - 5:00 pm
Eastern Standard Time. 800-729-1569 |USA only.
3
21
RING SHOULD
TOUCH THE
BOARD
CAM FASTENING SYSTEM EXAMPLE
Huisen Furniture (Longnan) Co., Ltd.
Designed in the USA |Made in China
We are available to assist you Monday - Friday from 9:00 am - 5:00 pm
Eastern Standard Time. 800-729-1569 |USA only.
4
21
11
• SCREW THE CAM BOLTS INTO THE BOTTOM PANEL
ADDITIONAL NOTES
PART F AND INTO THE TOP PANEL PART A.
INSERT THE CAM BOLT INTO
THE PREDRILLED PANEL. THE
SCREW SHOULD BE TIGHTENED
SO NO THREADS ARE VISIBLE.
PARTS
We are available to assist you Monday - Friday from 9:00 am - 5:00 pm
Eastern Standard Time. 800-729-1569 |USA only.
5
21
2
• INSERT 6 CAM LOCKS INTO PART C1 AND E. INSERT
CAM LOCK FULLY INTO THE HOLE.
• SCREW CAM BOLTS INTO PART C1 AND E.
• INSERT DOWELS INTO PART C1 AND E AS SHOWN.
INSERT ALL CAM LOCKS
FULLY INTO THE HOLE.
ADDITIONAL NOTES
PLUS AND MINUS SYMBOLS ON
THE CAMLOCK POINTS TO THE
PRE-DRILLED HOLE. INSERT CAM
LOCK FULLY INTO HOLE.
PARTS
TAP DOWELS INTO PREDRILLES HOLES LEAVING 1”
EXPOSED.
We are available to assist you Monday - Friday from 9:00 am - 5:00 pm
Eastern Standard Time. 800-729-1569 |USA only.
6
21
3
• SCREW THE CAM BOLTS INTO THE BOTTOM PANEL
ADDITIONAL NOTES
PART D1.
• INSERT 2 DOWELS INTO THE END AS SHOWN.
TAP DOWELS INTO PREDRILLES HOLES LEAVING 1”
EXPOSED.
INSERT THE CAM BOLT INTO
THE PREDRILLED PANEL. THE
SCREW SHOULD BE TIGHTENED
SO NO THREADS ARE VISIBLE.
PARTS
STEP 4 REQUIRES THIS PART TO BE FLIPPED OVER UPON COMPLETION OF THIS STEP.
We are available to assist you Monday - Friday from 9:00 am - 5:00 pm
Eastern Standard Time. 800-729-1569 |USA only.
7
21
Loading...