Huion W58, WH1409, DWH69 User Manual
Content
For Win
Wireless Graphic Tablet
User Manual
Content
-1-
Content
CONTENT
I. General Information
1. Overview
2. Graphic Tablet Functions
3. System Requirements
4. Installing the Driver On Windows
5. Hardware Installation
6. Wireless Graphic Tablet
7. Usage Tips
II. Driver Interface Introduction
1. Control Interface
2. Pen Buttons Settings
2.1 Key Functions
3. Pen Pressure Sensitivity Test
4. Advanced Setting
4.1 Workspace Settings
4.2 No Shortcut Keys
5. Digital Pen Pressure Sensitivity Adjustment
6. Support TabletPC
3
3
3
3
3
3
4
5
6
6
6
6
7
7
7
8
9
9
lll. Pen Storage and Maintenance
1. AAA Battery Pen
2. Rechargeable Li-ion Battery Pen
IV. Question & Answer
V. Specifications
10
10
11
12
13
Content
-2-
Content
I. General Information
1. Overview
Welcome to the world of Huion tablet and Huion digital pen! You are able to discover how easy is to control your
personal computer by using a wireless digital pen instead of a mouse. The function of the digital pen is able to
draw a very thin, thick, light or dark line, which is called pressure sensitivity. You can write, sign, correct
documents, edit photos, draw, sketch or paint as easily as you would do on a normal paper and simulate the
functions like pencil, marker pen, brush, or water color pen by using the commercial software packages such as
Adobe Photoshop, Corel Painter and Paint Shop and many others.
2. Graphic Tablet Functions
After installing the driver, your graphic tablet has the following functions:
(1) Direct pointing — you can move the cursor to any area of the screen by hovering the digital pen tip over the
tablet’s surface.
(2) Three-buttons mouse commands — your graphic tablet provides all functions of a three-buttons’ mouse by
using its pen tip and two buttons.
(3) Pressure sensitivity — this feature allows you to simulate various brushes and pencils so you can press down
the pen tip harder, lighter, then the wider and thinner line you will get.
3. System Requirements
Windows 7 / Windows 8 / Windows 8.1 / Windows 10
4. Installing the Driver on Windows
Please close all painting software and antivirus software before driver installation.
Please do not connect the USB cable before driver installation.
For Microsoft Windows 7, Windows 8, Windows 8.1 and Windows 10 operating systems:
(1) Insert the Driver CD into the CD-ROM drive, and wait for the main installation screen to appear.
(2) The main installation screen should appear automatically, or you can manually start the installation by opening
[My Computer] [CD/DVD Rom] then click on the [Setup] program.
(3) When installing the driver, follow the installation instructions on screen.
(4) After finishing the driver installation, you will see a small tablet icon ( ) appears in the system tray, at the
lower right corner of the screen, which is normal.
5. Hardware Installation
Connect the tablet via USB cable to the PC after the driver installation
is finished.
After connecting, the cross on the tablet icon ( ) will disappear.
Content
-3-
Content
6. Wireless Graphic Tablet
6.1 Dual working modes - wired & wireless
Wireless Graphic Tablet:
Model: DWH69
USB Port
Power Switch
Express Key
TFT Screen
Working Area
1. Charging Method
• Connect the wireless graphic tablet to your PC by using USB cable. Turn the power switch ON.
2. Connection Method
(1) Wireless Mode
• Turn the power switch ON. then plug the wireless receiver to PC and wait for three seconds.
• Tips: It will “auto sleep” if it’s not used for over 10 minutes. please switch the power to “OFF”, then to “ON” when
you want to wake it up.
(2) Wired Mode
• Unplug the wireless receiver from your PC, and connect the wireless tablet to the PC via the provided USB cable,
and ready to use after 3 seconds waiting.
Wireless Receiver
Battery Slot
3. LED Indicator
Digital Pen Indicator Touch Keys Indicator Wireless Mode Indicator
Low Power Indicator (Please charge your device) Wired Charging Indicator
Wired Mode Indicator Power Indicator
Model: W58
Battery Slot
Wireless Receiver
LED Indicator
Working Area
Power Switch
1. Charging Method
• Connect the wireless graphic tablet to your PC by using USB cable. Turn the power switch ON.
2. Connection Method
(1) Wireless Mode
• Turn the power switch ON， then plug the wireless receiver to PC and wait for 3 seconds.
• Tips: If not used for more than 10 minutes, the device activates Auto Sleep Mode to save battery. To activate
Working Mode again please turn the power switch OFF and ON again.
(2) Wired Mode
• First, unplug the wireless receiver from your PC and connect your tablet and PC by using USB cable. It is ready
for use in Wired Mode in 3 seconds.
3. LED Indicator
• When the pen tip touch the woking area , LED indicator will light up.
• The LED indicator flashes red when the battery level is <20% or when the tablet is charging.
Content
-4-
Loading...