Huf Huelsbeck and Fuerst and KG TUGEN2 Users Manual
Description No. 1
Date: 2017-08-01
Telematics Unit Gen.2
Revision: B
EN, FCC and ISED Approval
Huf Hülsbeck & Fürst
Created by:
M.Eng. Markus Mehlich
Hardware Developer
Huf Secure Mobile GmbH
Steeger Straße 17
42551 Velbert
Phone.: +49(0)2051 272-6048
Mail: markus.mehlich@huf-group.com
www.huf-group.com
Created:
Changed:
2017-03-10
2017-08-01
Description File
No.1
Revision B
EN, FCC and ISED Approval for:
Page 1 of 10
Telematics Unit Gen.2 (TUGen2) HW003.1
HUF Project No.: 0891.003
All information contained in this document are strictly confidential and should not be
available for a third party.
Description No. 1
Datum: 2017-08-01
Telematics Unit Gen.2
Revision: B
EN, FCC and ISED Approval
Huf Hülsbeck & Fürst
Page 2 of 10
Table of Contents
PRODUCT DESCRIPTION 3 1
1.1 General and Function: 3
1.2 System Overview 3
1.3 Module Description 4
1.4 Interfaces 4
1.5 Technical Data 5
DESCRIPTION OF VARIANTS 6 2
HOUSING 7 3
ASSEMBLY INSTRUCTIONS 7 4
CONNECTOR 7 5
Description No. 1
Datum: 2017-08-01
Telematics Unit Gen.2
Revision: B
EN, FCC and ISED Approval
Huf Hülsbeck & Fürst
Page 3 of 10
Product Description 1
1.1 General and Function:
The Telematics Unit Gen.2 is used for determining detailed information about
movement of fleet vehicles and sending that information to appropriate servers. The
information is illustrated to a fleet manager by a resource management software to
make an optimized use of the vehicles possible.
The electronic control unit (ECU) is an independent unit, which is able to determine
GPS coordinates, acceleration values, states of vehicle equipment and CAN
information. All that information can be sent to a resource management server or a
smartphone via an mobile communication network.
1.2 System Overview
Loading...