Huffy 1051 User Manual

12/02 P/N 211670

1

Toll-Free Customer Service Number for U.S: 1-800-558-5234

Internet Address: http://www.hydra-rib.com

IMPORTANT! Have any questions?...Don’t go back to the store!

We appreciate your purchasing one of our many fine products. We are sure that you will be very satisfied with your selection. Although
great care and effort have been taken, occasionally problems may occur. To ensure prompt and correct handling of any problems, or to
answer any questions, please contact our Toll-Free Customer Service Number listed below. Service will be quicker if you have your

Model Number (found on carton) and assembly instructions ready when calling. PLEASE WRITE YOUR MODEL NUMBER IN THE
SPACE PROVIDED ABOVE.

McCall's Rebounder

Owners Manual

© COPYRIGHT 2002 by HUFFY SPORTS

A Huffy Sports Company

Customer Service Center

N53 W24700 South Corporate Circle

Sussex, WI 53089

U.S.A.

WRITE IN YOUR MODEL NUMBER: 1051

SAFETY INSTRUCTIONS

Most injuries are caused by misuse and/or not following instructions.

Use caution when using this system.

• If using a ladder during assembly, use extreme caution.

• Two (2) people are recommended for this operation.

• Ensure there are no overhead power lines within 20 ft. (7 m) radius of system
location.

• Climate, corrosion, excessive use, or misuse could result in system failure.

• If technical assistance is required, contact Huffy Sports.

• Read and understand the warning label affixed to pole.

• The life of your basketball pole depends on many conditions. The climate,
placement of the pole, the location of the pole, exposure to corrosives such as
pesticides, herbicides or salts are all important.

• Adult supervision is recommended when adjusting height.

• Serious injury could occur if teeth/face come in contact with rebounder.

FAILURE TO FOLLOW THESE SAFETY INSTRUCTIONS MAY RESULT IN

SERIOUS INJURY, PROPERTY DAMAGE AND WILL VOID WARRANTY.

Owner must ensure that all players know and

follow these rules for safe operation of the system.

To ensure safety, do not attempt to assemble this system without following the
instructions carefully. Proper and complete assembly, use and supervision is
essential for proper operation and to reduce the risk of accident or injury. A
high probability of serious injury exists if this system is not installed,
maintained, and operated properly. Check entire box and inside all packing
material for parts and/or additional instructional material. Before beginning
assembly, read the instructions and identify parts using the hardware identifier
and parts list in this document.

For more information on assembly, placement, proper use and maintenance,
visit The American Basketball Council website at http://www.smarthoops.com.

REQUIRED TOOLS AND

MATERIALS:

• Minimum of 2 People

• Step Ladder 8 ft. (2.4m)

• (2) 7/16" Wrenches, 9/16" Wrenches, 3/4"
Wrenches, (1) 15/16" Wrench
or (2) Adjustable Wrenches

• (1) Standard and (1) Philip's Screwdriver

• 200 lbs. of ballast via (2) 100 lb.
Sand Bags.

2

P/N 211670 12/02

12/02 P/N 211670

PARTS LIST

(See Hardware Identifier)

Item

Qty. Part No. Description

1 1 200416 Base (Black)
2 4 200417 Casters
3 1 200419 Left Support Brace
4 1 201875 Right Support Brace
5 1 200423 Outer Pole Assembly
6 1 201876 Inner Pole, Fixed Upright
7 1 201877 T-Screw
8 1 200418 Collar

9 1 200421 Winch Handle
10 1 200409 Cable Assembly
11 1 200410 Winch
12 1 201878 Graduated Scale
13 1 201879 Indicator Bracket
14 1 201888 Rebound/Tip-in Indicator
15 1 200399 Hopper
16 1 200400 Rebound Arm
17 1 200401 Ball Check Mechanism
18 2 226023 Air-Checks
19 1 201880 Allen Wrench
20 8 206246 Bolt, Hex 1/2-13 X 1.5"
21 1 204453 Bolt, Hex 3/8-16 X 1"
22 18 201890 Screw, 3/4" Long
23 2 201881 Screw, Self-Tapping, 1/4" Long
24 1 201891 Nut, 5/8"
25 2 202459 Nut, 1/2-13,
26 3 203017 Nut, 3/8-16
27 16 203002 Nut, 1/4-20
28 1 201884 Lockwasher 1" O.D.
29 8 201886 Lockwasher, 7/8" O.D.
30 4 201885 Lockwasher, 3/4" O.D.
31 18 201887 Lockwasher, 1/2" O.D.
32 4 201882 Pin, Clevis
33 4 201883 Screw, Clevis
34 1 200402 1/2" Steel Shaft
35 2 300382 Sand Storage Bags

* YOU MAY HAVE EXTRA PARTS WITH THIS MODEL.

McCall's REBOUNDER

REBOUND ARM

OUTER POLE

GRADUATED

SCALE

HOPPER

BASE

SUPPORT BRACE

WINCH

INNER POLE

COLLAR

TIP-IN

INDICATOR

WINCH HANDLE

SAND
BAGS

12/02 P/N 211670

3

HARDWARE IDENTIFIER

Item #20 (8)

Item #7 (1)

Item #21 (1)

Item #22 (18)

Item #23 (2)

Item #19 (1)

Item #32 (4)

Item #33 (4)

Item #24 (1)

Item #25 (2)

Item #26 (3)

Item #27 (16)

Item #28 (1)

Item #29 (8)

Item #30 (4)

Item #31 (18)

4

P/N 211670 12/02

12/02 P/N 211670

Tip base on it's side and install casters (2) to the bottom of base (1) as shown

using bolts (22), lockwashers (31) and nuts (27).

1.

22

2.

Attach collar (8) to outer pole (5) as shown with T-Screw bolt (7). Tighten
completely.

7

8

2

5

NOTE:

THE T-SCREW (7) IS USED TO SECURE

COLLAR TO OUTER POLE (5) UNTIL

STRUTS ARE ATTACHED (STEP 4).

AT THAT POINT THE

T-SCREW (7) CAN BE LOOSENED.

TWO PERSON MINIMUM

REQUIRED FOR THIS

PROCEDURE. NOT

FOLLOWING

RECOMMENDATION MAY

RESULT IN BODILY

INJURY.

WARNING

6

31

27

SECTION A : ASSEMBLING THE McCALL'S REBOUNDER