hudson valley Woodstock HVFC 7599 Owner's Manual

READ AND SAVE THESE INSTRUCTIONS

MODEL: Woodstock

HVFC 7599

Old Bronze

Satin Nickel

Polished Nickel

CEILING FAN
OWNER'S MANUAL

FAN RATING AC 120V. 60Hz. CUL LISTED MODEL: AC-552LF6700

WEIGHT OF THE FAN: 12.41KGS

1. To reduce the risk of electric shock,
insure electricity has been turned off at
the circuit breaker or fuse box before
beginning.

2. All wiring must be in accordance with
the National Electrical Code and local
electrical codes. Electrical installation
should be performed by a qualified
licensed electrician.

3. NOTE: This fan are suitable for use with
solid-state speed controls.

4. WARNING: To reduce the risk of
personal injury, use only the two steel
screws (and lock washers) provided with
the outlet box for mounting to the outlet
box. Most outlet boxes commonly used
for the support of lighting fixtures are
not acceptable for fan support and may
need to be replaced, consult a qualified
electrician if in doubt.

5. The outlet box and support structure must
be securely mounted and capable of
reliably supporting a minimum of 50
pounds. Use only CUL Listed outlet
boxes marked "FOR FAN SUPPORT".

6. The fan must be mounted with a
minimum of 7 feet clearance from the
trailing edge of the blades to the floor.

7. To operate the reverse function on this

fan, press the reverse button while the
fan is running.

8. Avoid placing objects in the path of the
blades.

9. To avoid personal injury or damage to
the fan and other items, be cautious
when working around or cleaning the
fan.

10. Do not use water or detergents when
cleaning the fan or fan blades. A dry
dust cloth or lightly dampened cloth will
be suitable for most cleaning.

11. After marking electrical connections,
spliced conductors should be turned
upward and pushed carefully up into
outlet box. The wires should be spread
apart with the grounded conductor and
the equipment-grounding conductor on
one side of the outlet box.

12. Electrical diagrams are reference only.
Light kit that are not packed with the fan
must be CUL Listed and marked suitable
for use with the model fan you are
installing. Switches must be CUL
General Use Switches. Refer to the
Instructions packaged with the light kits
and switches for proper assembly.

1

1. SAFETY RULES

WARNING

TO REDUCE THE RISK OF FIRE,

ELECTRIC SHOCK OR PERSONAL

INJURY, MOUNT FAN TO OUTLET

BOX MARKED "ACCEPTABLE FOR

FAN SUPPORT".

WARNING

TO REDUCE THE RISK OF PERSONAL

INJURY, DO NOT BEND THE BLADE

BRACKETS (ALSO REFERRED TO AS

FLANGES) DURING ASSEMBLY OR

AFTER INSTALLATION. DO NOT

INSERT OBJECTS IN THE PATH OF

THE BLADES.

3. PACKAGE CONTENTS

Unpack your fan and check the contents.
You should have the following items:

a. Set of fan blades (5)
b. Hanger bracket assembly
c. Downrod
d. Coupling cover
e. Fan motor assembly
f. Set of blade support plates (5)
g. Mounting plate
h. Light plate
i. Glass shade assembly
j. Receiver+6 wire nuts
k. Wall transmitter incl. 2 mounting screws
and 3 wire nuts
l. Wall plate w/2 mounting screws
m. Package hardware

1) Mounting hardware :
screws (2), lock washers (2),
star washers (2), wire nuts (3)
wood screws (2), washers (2)

2) Blade attachment hardware:
screws (16), fiber washers (16)

3) Balance Kit

Philips screw driver
Blade screw driver

1/2" wrench
Step ladder

Wire cutters/strippers

2

a

b

c

d

e

f

g

h

i

j

m

l

k

2. TOOLS AND
MATERIALS REQUIRED

4. MOUNTING OPTIONS

If there isn't an existing UL listed mounting
box, then read the following instructions.
Disconnect the power by removing fuses or
turning off circuit breakers.

Secure the outlet box directly to the building
structure. Use appropriate fasteners and
building materials. The outlet box and its
support must be able to fully support the
moving weight of the fan (at least 50 lbs). DO
NOT use plastic outlet boxes.

Figures 1, 2 and 3 are examples of different
ways to mount the outlet box.

Note: You may need a longer downrod to
maintain proper blade clearance when
installing on a steep, sloped ceiling. (Fig. 3)

To hang your fan where there is an existing
fixture but no ceiling joist, you may need an
installation hanger bar as shown in Figure 4.

3

Outlet box

UL approved
fan hanger bar kit

Provide strong
support

Recessed
outlet box

Ceiling
hanger
bracket

Outlet box

Figure 1

Figure 3

Figure 4

Outlet box

Figure 2

*

Angled ceiling
maximum
25° angle