Hudson Sales & Engineering DC-545 User Manual
HUDSON’S GOOD
DocuCutter DC-545
Popular Applications:
March 2002
S
e
e
D
e
m
o
a
on Duplo & Xerox Stands
t IP
EX
■ Full Bleed Trimming
■ Brochures
■ Annual Reports
■ Book Covers
■ Catalogues
■ Greeting Cards
■ Photographs
■ Business Cards
■ Flyers
■ Posters
■ More
Perfect Slit, Cut and Crease Finishing Solution
for Digital Colour Printing
Digital Colour
Document
Document Finishing
Requirements
Finished Documents
(Creased)
The Finishing Solution
The Finishing Solution
for Printed Output
for Printed Output
From Digital Colour
From Digital Colour
Printers and Copiers
Printers and Copiers
DocuCutter DC-545
• Slit, Cut and Crease (eliminates unsightly toner cracking) in One Pass
• Barcode Reader That Performs Automatic Setting of Slit, Cut, and Crease Position
• Registration Mark Recognition for Image Shift Correction
• Simple Operation and User Friendly
Specifications
Speed Up to 12 ppm
Input Paper Size 215.9 mm x 279.4 mm to 320 mm x 457.2 mm
(8.5" x 11" to 12.6" x 18")
Finishing Size Min.: 51 mm x 89 mm (2" x 3.5") - business card size
Output Paper Size 50.80 mm x 88.90 mm to 320.04 mm x 457.20 mm
(2" x 3.5" to 12.6" x 18")
CCD Barcode and Registration
Mark Reader
Precision Cutter and Dual Margin Slitters
Three Centre Slitters
Lead Edge Trim 0.125 mm minimum
Trail Edge Trim 0.125 mm minimum
Side Edge Trim 0.125 mm minimum
Slit Tolerance +/- 0.03" (+/- 0.762 mm)
Paper Weights 21 to 85 lbs (80 to 230 gsm)
Cutting and Creasing Tolerance +/- 0.02" (0.5 mm)
Power Requirements 120/240 V, 50/60 HZ, 2.1 Amp
Machine Dimensions In Storage: 23.2"(W) x 22.2"(D) x 13"(H)
In Use: 51.2"(W) x 22.2"(D) x 11.8"(H)
Weight 56.25 kg (124 lbs)
Additional Features 80 job memories, LCD display, image shift correction
and barcode
Status Indicator Jam, safety cover open and out-of-paper detection
Slitters Two margin and three centre
Optional Auto Feeder
Feeding Method Air suction belt feeder
Feed Capacity 135 mm (5.3")
* Specifications subject to change
Digital colour documents need
professional finishing to prevent the
unattractive white borders and toner
cracking that occurs wherever they are
folded.
The Duplo DocuCutter has the ability to
automatically slit, cut, and crease a
document in one pass, making it the
ideal finishing solution for the short-run
on-demand market. It allows users to
quickly and easily produce professionally
finished, full-bleed documents by simply
loading a sheet!
The DocuCutter DC-545 makes it easy
and economical to produce a wide
variety of applications including: business
cards, greeting cards, invitations,
brochures, catalogues, posters, book
covers, photographs and more.
A barcode reader not only enables the
system to recall pre-programmed jobs, thus
providing a fully automatic slitting, cutting,
and creasing solution, but will also read a
registration mark ensuring precise output
every time. The DC-545 will compensate for
image shift from start to finish.
The easy to use DocuCutter features an
LCD control panel that guides the user
through the set-up of the slit, cut, and
crease positions. And with 80 memory
A. E. HUDSON — GOOD IMPRESSIONS
settings, there is plenty of storage for
commonly used jobs.
In addition, the optional auto feeder will
continuously feed sheets, which provides a
highly productive slitting, cutting, and
creasing solution.
Duplo Corporation is represented in
Australia by A.E. Hudson Pty Ltd.
Loading...