Hudson Medical Bariatric 3 Supreme Low Contour User Manual
Size Selecon of the Pressure EEZ®
Supreme™ Low Contour Wheelchair Cushion
Simply select the cushion that would match the width of your hips when
seated. Cushion size should not be determined by the wheelchair seat
width. Improper cushion fit will affect the performance of pressure distribuon of the cushion and its proper posioning support of the body.
The length of the cushion should be determined by placing the cushion
at the back of the wheelchair while the length extends to the front within
1" to 2" from the back of the knees. The ischial tuberosies (sing bones)
should be centered in the seat in the center of the back seang area.
The footrest should be adjusted properly in order to enhance seang
comfort and help to lower peak seang pressures. In order to prevent the
Supreme™ Low Contour Cushion from sliding on the wheelchair upholstery,
especially during transfers, follow these instrucons.
THE
THE
™
SUPREME
SUPREME
Low Contour Wheelchair Cushion
Step 1.
wheelchair seat.
Step 2. Peel off the paper backing of the Velcro®
strip provided and place 2" from the front, in the
center of the wheelchair seat, as shown.
Step 3. Place the cushion on the wheelchair. The
Velcro® strip on the boom of the upholstered
Supreme™ Low Contour Cushion as well as the
non-slip surface and the Velcro® strip placed on
the seat will prevent sliding when changing body
posion while seated.
To Clean the Cover
water and air dry. No ironing is required.
To Clean the Molded Foam Core
water.
The Supreme™ Low Contour Cushion Warranty
Cushion to be free from defects in material and workmanship for a period of 24
months from the date of purchase. Should defect occur, the cushion should be
returned by the customer to the place of purchase with original sales receipt.
Hudson Medical will determine if it is a manufacturing defect and replace or
repair the cushion without charge. This warranty does not apply to punctures,
tears and burns to the cushion or removable cover.
Thoroughly clean the surface of the
Remove the cover from the seat cushion. Machine wash in lukewarm
Simply spot clean or wipe with moist warm cloth. Avoid submerging in
Under normal use Hudson Medical guarantees the Supreme™ Low Contour
Now with Poly-Lite
™
for
Maximum Pressure Relief & Support
With Progressive Support Technology
for Custom Comfort
User Instrucon Manual & Warranty
Richmond, Virginia 23231 • 800-343-8112
www.hudsonindustries.com
I275863LC/0610
SKIN PROTECTION & POSITIONING – E2607 & E2608
HUDSON
THE
THE
™
SUPREME
SUPREME
Low Contour Wheelchair Cushion
Designed for Equalization, Positioning
and Comfort for Sling-Seat Wheelchairs
Molded Foam Core with (PST)
Progressive Support Technology
PST produces the right degree of cushion
firmness. Smaller, lightweight clients receive
a soer more compliant cushion, average
weight clients a medium firmness and larger
heavier clients receive a firmer more supportive cushion. The unique construcon of high
resilient (HR) molded foam provides maximum
stabilizaon, posioning, pressure relief and
correct seang posture.
Poly-Lite™ Pressure Relief Bladders
The inner liner membrane has bladders
filled with Poly-Lite™. A unique proprietary
super lightweight microspherical polymer that
provides the lowest pressure readings while
seated reducing the likelihood of pressure
sores. Poly-Lite™ weights 25% the weight of
gel, silicone or water and will not freeze, heat
up, evaporate, dry out, harden, separate,
boom-out, support a flame and is non-toxic.
The Supreme™ Low Contour Cover
Outer cover is a removable, washable,
flame retardant, stretch polyester knit to
reduce interface pressure and shearing. It is
constructed with a vapor permeable moisture
proof urethane backing and a non-slip boom
for comfort and safety.
PST SIZE RANGES
Firmness Cushion Width
So 10" to 14"
Medium 16" to 18"
Firm 20" to 24"
Use and Applicaon of the Pressure EEZ® Supreme™ Low Contour
Cushion for Posioning for Pressure Relief and Comfort
The Pressure EEZ® Supreme™ Low Contour Cushion with Poly-Lite™
reduces the likelihood of pressure sores by reducon of pressure while
posioning for comfort and safety.
Equalizaon of Pressure
The Pressure EEZ® Supreme™ Low Contour Cushion is manufactured
with a flexible urethane membrane casing with bladders of new Poly-Lite™;
a unique super lightweight microspherical polymer gel (weighs 1/4 the
weight of silicone or any other aqueous based gel) that has been radio
frequency sealed for strength and to prevent leakage. The Poly-Lite™
bladders are strategically placed in the coccyx, ischial tuberosity and thigh
area to reduce pressure and allow capillary blood flow.
Posioning for Comfort and Safety
The Pressure EEZ® Supreme™
Low Contour Cushion is uniquely
designed using a high resilient (HR),
custom molded foam core that
posions the body in the correct
seang posture, provides a leg abducon post to prevent leg rotaon
and abrasion. The Pressure EEZ®
Supreme™ Low Contour Cushion is
strategically contoured to provide
opmum seang posture. The Pres-
sure EEZ® Supreme™ Low Contour
with Poly-Lite™ remains cool and
combined with the breathable
moisture barrier cover, the body
remains cool, dry and comfortable.
Flexible Moisture
Proof Bladder
Radio Frequency
Sealed to
Prevent
Leakage
Leg Abducon
Post Prevents
Hip Rotaon
and Abrasion
High Density Molded
Urethane Foam for
Posioning, Support
and Comfort
Poly-Lite™ for
Pressure Relief
Air Vents on Each Side
to Evacuate Contained
Air in the Molded
Foam Base
The Supreme™ Low Contour Wheelchair Cushion
is Available in the Following Sizes:
Units/ Medicare Weight
Item No. Size Case Code Capacity Warranty
275663LC 16” x 16” x 3” 1 E2607 275 24 Months
275683LC 16” x 18” x 3” 1 E2607 275 24 Months
275603LC 16” x 20” x 3” 1 E2607 275 24 Months
275863LC 18” x 16” x 3” 1 E2607 275 24 Months
275883LC 18” x 18” x 3” 1 E2607 275 24 Months
275803LC 18” x 20” x 3” 1 E2607 275 24 Months
275063LC 20” x 16” x 3” 1 E2607 275 24 Months
275083LC 20” x 18” x 3” 1 E2607 275 24 Months
275003LC 20” x 20” x 3” 1 E2607 275 24 Months
275283LC 22” x 18” x 3” 1 E2608 350 24 Months
275483LC 24” x 18” x 3” 1 E2608 350 24 Months
Cover Warranty: 3 Months
Loading...